Demonstration of 13.56-MHz class-E amplifier using a high-Voltage GaN power-HEMT

A 13.56-MHz class-E amplifier with a high-voltage GaN HEMT as the main switching device is demonstrated to show the possibility of using GaN HEMTs in high-frequency switching power applications such as RF power-supply applications. The 380-V/1.9-A GaN power HEMT was designed and fabricated for high-voltage power-electronics applications. The demonstrated circuit achieved the output power of 13.4 W and the power efficiency of 91% under a drain-peak voltage as high as 330 V. This result shows that high-voltage GaN devices are suitable for high-frequency switching applications under high dc input voltages of over 100 V.     

Study of Superconducting Fault Current Limiter Using Vacuum Interrupter Driven by Electromagnetic Repulsion Force for Commutating Switch

Using a high-temperature superconductor, we constructed and tested a model superconducting fault current limiter (SFCL). The superconductor and the vacuum interrupter as the commutation switch were connected in parallel using a bypass coil. When the fault current flows in this equipment, the superconductor is quenched and the current is transferred to the parallel coil because of the voltage drop in the superconductor. This large current in the parallel coil actuates the magnetic repulsion mechanism of the vacuum interrupter. Due to the opening of the vacuum interrupter, the current in the superconductor is broken. By using this equipment, the current flow time in the superconductor can be easily minimized. On the other hand, the fault current is also easily limited by large reactance of the parallel coil     

Multi-modal Information Integration for Interactive Multi-agent Systems

This paper proposes a multi-agent system that carries out cooperative work. To achieve this, we use Fuzzy Associative Memory Organizing Unit Systems (FAMOUS) and Conceptual Fuzzy Sets (CFS). By using these proposed methods, each agent robot can decide its own behaviour to suit the situation in its environment. We apply this system to an Intelligent Transportation System (ITS) and do simulations.     

Vapor pressure measurement of zn-fe intermetallic compounds

Most galvanized steel sheets are produced by a continuous galvanizing line. Some of the operations include a subsequent heat treatment termed galvannealing to form intermetallic phases on the surface. These galvanizing reactions are essentially regarded as “making intermetallic compounds” in the Fe-Zn-M system. This makes it important to know the thermodynamic properties of the system for any detailed discussion on the formation of these intermetallics; however, experimental difficulties have limited the number of studies. In the present study, two-phase regions of these intermetallics were examined, and the following two-phase mixtures were prepared at 723 K: Fe(α)+Γ, Γ,+Γ₁, Γ₁+δ ₁+ζ. The double cell-type Knudsen mass spectrometer system was developed and employed, in which two sets of Knudsen cells were installed in the same cell holder. The reference material (pure zinc) was placed in one cell and a sample in the other. The cell holder was rotated to the reference and sample positions to measure zinc vapor effused from two cells by a quadrupole mass spectrometer. Material containing the two phases was placed in a Knudsen-type effusion cell and the mass spectrum studied to evaluate the vapor pressure of zinc. The activity of zinc in the intermetallics was determined by comparing the intensity from pure zinc and that from intermetallics. Results for Fe(α)+Γ were 0.46 to 0.48; for Γ+Γ₁, 0.51 to 0.54; for Γ₁+δ ₁, 0.62 to 0.66; and for δ ₁+ζ, 0.80 to 0.83, between the temperatures of 623 and 698 K.     

Feasibility of a 1,400 m Span Steel Cable-Stayed Bridge

This paper describes the feasibility of 1,400 m steel cable-stayed bridges from both structural and economic viewpoints. Because the weight of a steel girder strongly affects the total cost of the bridge, the writers present a procedure to obtain a minimum weight for a girder that ensures safety against static and dynamic instabilities. For static instability, elastoplastic, finite-displacement analysis under in-plane load and elastic, finite-displacement analysis under displacement-dependent wind load are conducted; for dynamic instability, multimodal flutter analysis is carried out. It is shown that static critical wind velocity of lateral torsional buckling governs the dimension of the girder. Finally, the writers briefly compare a cable-stayed bridge with suspension bridge alternatives.     

High temperature superconductor micro-superconducting-quantum-interference-device magnetometer for magnetization measurement of a microscale magnet

We have developed a high temperature superconductor (HTS) micrometer-sized dc superconducting quantum interference device (SQUID) magnetometer for high field and high temperature operation. It was fabricated from YBa2Cu3O7-delta of 92 nm in thickness with photolithography techniques to have a hole of 4x9 microm2 and 2 microm wide grain boundary Josephson junctions. Combined with a three dimensional magnetic field coil system, the modulation patterns of critical current Ic were observed for three different field directions. They were successfully used to measure the magnetic properties of a molecular ferrimagnetic microcrystal (23x17x13 microm3), [Mn2(H2O)2(CH3COO)][W(CN)8]2H2O. The magnetization curve was obtained in magnetic field up to 0.12 T between 30 and 70 K. This is the first to measure the anisotropy of hysteresis curve in the field above 0.1 T with an accuracy of 10(-12) J T(-1) (10(-9) emu) with a HTS micro-SQUID magnetometer.     

Mutagenicity and DNA-damaging activity of decomposed products of food colours under UV irradiation

Five synthetic food colours Food Red Nos 3, 40 and 102 and Food Blue Nos 1 and 2, and their UV irradiated products were tested for mutagenic activity by means of the Ames test using Salmonella typhimurium strains TA98 and TA100. Food colours were irradiated with UV light for 14 days. Food Red Nos 3, 40 and 102 and Food Blue No. 1 were non-mutagenic before and after irradiation. UV irradiated products of Food Blue No. 2 were mutagenic in TA98 with or without S-9 mix. The mutagenic activity increased with increasing irradiation period, reached maximum potency on day 6, and then decreased. Moreover, Food Blue No. 2 showed DNA-damaging activity after 14 days of irradiation in rec-assay using Bacillus subtilis strains H17 and M45. The capillary electrophoresis was applied for the analysis of UV irradiated products of Food Blue No. 2. The original peak of Food Blue No. 2 was decomposed into seven peaks after UV irradiation.     

In-Situ Observation of SiC Bulk Single Crystal Growth by XRD System

In-situ analysis for SiC bulk single crystal growth was reported using vertical X-ray diffractometer system. A furnace for SiC sublimation growth combined with the XRD system which possessed three kinds of functions including topography, rocking curve measurement and crystal growth rate monitoring was developed. These functions could contribute as a powerful tool finding the optimum growth condition by dynamic observation in the crucible. In this study, the in-situ X-ray topographs succeeded to capture dynamic elongation of defects and dislocation generated in the SiC growing crystals. The in-situ rocking curve measurement reviled appearance of mosaic structure in the SiC crystal grown with high growth rate. The in-situ growth rate monitoring also succeeded very precisely using the direct X-ray beam absorption. On the base of findings and facts obtained by the in-situ observations, the importance for the SiC growth was discussed.     

Bile Acid–Drug Interaction via Organic Anion-Transporting Polypeptide 4C1 Is a Potential Mechanism of Altered Pharmacokinetics of Renally Excreted Drugs

Patients with liver diseases not only experience the adverse effects of liver-metabolized drugs, but also the unexpected adverse effects of renally excreted drugs. Bile acids alter the expression of renal drug transporters, however, the direct effects of bile acids on drug transport remain unknown. Renal drug transporter organic anion-transporting polypeptide 4C1 (OATP4C1) was reported to be inhibited by chenodeoxycholic acid. Therefore, we predicted that the inhibition of OATP4C1-mediated transport by bile acids might be a potential mechanism for the altered pharmacokinetics of renally excreted drugs. We screened 45 types of bile acids and calculated the IC₅₀, K_i values, and bile acid–drug interaction (BDI) indices of bile acids whose inhibitory effect on OATP4C1 was >50%. From the screening results, lithocholic acid (LCA), glycine-conjugated lithocholic acid (GLCA), and taurine-conjugated lithocholic acid (TLCA) were newly identified as inhibitors of OATP4C1. Since the BDI index of LCA was 0.278, LCA is likely to inhibit OATP4C1-mediated transport in clinical settings. Our findings suggest that dose adjustment of renally excreted drugs may be required in patients with renal failure as well as in patients with hepatic failure. We believe that our findings provide essential information for drug development and safe drug treatment in clinics.     

基于荧光显微镜的毛细管电泳系统的构建

毛细管电泳仪具有灵敏度高、分析速度快等优势,为降低其生产成本,基于电泳原理,以荧光显微镜为基础,设计了一套毛细管电泳系统。以20 bp(base pairs,碱基对)DNA ladder和100 bp DNA ladder为样本,全面分析了系统的稳定性、灵敏度和分离效果。结果表明:该系统在9 min内可以实现1500 bp以内DNA片段的高效分离,系统检测极限为0.1 ng/μL;在优化的电泳条件下,对限制性内切酶φX174-HincⅡ作用过的λ-DNA片段5 min内实现了291 bp与297 bp DNA片段的区分。