Contamination levels of PCDDs, PCDFs and Co-PCBs in commercial baby foods in Japan

To examine dioxin contamination in commercial baby foods in Japan, congener analyses of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and coplanar polychlorinated biphenyls (Co-PCBs) were performed on 102 varieties of baby foods obtained from supermarkets in 2001-2002. The toxic equivalent quantity (TEQ) levels for dioxins in samples ranged from < 0.001 to 0.135 pg-TEQ/g wet weight when undetected or trace levels of congeners were taken as zero. Among 102 samples tested, 26 samples exceeded 0.010 pg-TEQ/g. The highest TEQ value was for "sardine, vegetables" (0.135 pg-TEQ/g), followed by "Japanese radish (daikon), sardine" (0.080 pg-TEQ/g). Thus, dioxins were detected at low levels in baby foods containing animal products such as fishes and/or dairy products.     

Evaluation of drug toxicity with hepatocytes cultured in a micro-space cell culture system

A micro-space cell culture system was recently developed in which cells such as hepatocytes can be cultured and formed into a multicellular three-dimensional (3D) architecture. In this study, we assessed the performance of HepG2 cells cultured in this micro-space cell culture system in a drug toxicity test, and evaluated the effects of micro-space culture on their hepatocyte-specific functions. The micro-space cell culture facilitated the formation of 3D HepG2 cell architecture. HepG2 cells cultured in a micro-space culture plate exhibited increased albumin secretion and enhanced mRNA expression levels of cytochrome P450 (CYP) enzyme compared to those cultured in a monolayer culture. When the cells were exposed to acetaminophen, a hepatotoxic drug, the damage to the HepG2 cells grown in micro-space culture was greater than the damage to the HepG2 cells grown in monolayer culture. In addition, human primary hepatocytes grown in micro-space culture also exhibited increased albumin secretion, enhanced CYP mRNA expression levels and increased sensitivity to acetaminophen compared to those grown in monolayer culture. These results suggest that this micro-space culture method enhances the hepatocyte-specific functions of hepatocytes, including drug-metabolizing enzyme activities, making hepatocytes grown in the micro-space culture system a useful tool for evaluating drug toxicity in vitro.     

PBPAF／PBPA共混物相容性的研究

研究了双酚ＡＦ基聚合物和双酚Ａ基聚合物的共混相容性。通过用ＤＳＣ，ＴＭＡ测定单一聚合物和共混物的玻璃化温度来判别它们的相容性．结果表明，两种聚合物在部分组成比时有一定的相容性。     

Filter-based energy-resolved X-ray computed tomography with a clinical imager

Filter-based energy-resolved X-ray computed tomography (CT) is an approach for implementing energy-resolved CT imaging using a flat-panel-detector-based cone-beam system. In this study, we performed experiments with a 20-cm-diameter phantom on a clinical X-ray imager. The material density results showed good agreement with the ideal values. We also propose an improved method for obtaining the detector response function and the X-ray spectrum, which requires fewer measurements and will be practical for future clinical use. Issues such as scatter and image noise remain to be addressed.     

Experimental Evaluation of Characteristics of SR Motor Made of Permendur

A switched reluctance (SR) motor has a doubly salient pole structure. The performance of the SR motor strongly depends on the magnetic properties of the core material, since it consists only of an iron core and copper windings. This study experimentally evaluates the performance of an SR motor made of permendur (Fe–49% Co alloy), which has very high saturation flux density and low core loss. Two types of SR motors that have the same dimensions but different core materials are used: one motor is made of the conventional nonoriented Si steel, and the other is made of permendur. Comparison of the characteristics of the two motors shows that the performance of the permendur SR motor surpasses that of the conventional one in terms of output power and efficiency. © 2014 Wiley Periodicals, Inc. Electr Eng Jpn, 187(1): 51–57, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22431     

Complex chain of momentum transfer of body segments in the baseball pitching motion

Abstract

Baseball pitching requires contributions from and interaction among all limb segments. Most previous investigators have concentrated on the throwing arm itself, but the center of mass (COM) and contribution of all segments in the pitching motion have not been studied. The purpose of this study was to investigate the momentum transfer of all body segments in the pitching motion. The kinematics pitching motion data were captured from three experienced pitchers (one is professional, two are amateurs). A ten‐segment body system was modeled in this study. The results showed that the lowest position of the COM during the pitching cycle occurred around the ball release time and the fastest velocity (2.81±0.18 m/sec) of the COM was in the late cocking phase. The trunk and thigh on the throwing side showed the largest linear momentum among all segments in the late cocking phase. The upper throwing arm and forearm had peak linear momentum in the acceleration phase. The trunk also had the largest angular momentum during the pitching cycle and reached the maximum rotational momentum (4.17±1.22 Kg‐m²/sec) in the late cocking phase and medial bending momentum (9.03±5.78 Kg‐m²/sec) at the end of the late cocking phase. From the time sequence of linear momentum changes, especially in the leading direction, the force transfer from the foot to the trunk then through the upper extremity during the pitching motion was identified. The largest change rate of angular momentum found in the trunk meant that the trunk contributed the largest torque in the pitching motion. Better coordination of the body segments in the pitching motion not only enhances performance but also avoids injury. The coordination of motion by athletes in the pitching motion provides a guideline for better coaching and training.     

Robust comprehension of natural language instructions by a domestic service robot

We present a method through which domestic service robots can comprehend natural language instructions. For each action type, a variety of natural language expressions can be used, for example, the instruction, ‘Go to the kitchen’ can also be expressed as ‘Move to the kitchen.’ We are of the view that natural language instructions are intuitive and, therefore, constitute one of the most user-friendly robot instruction methods. In this paper, we propose a method that enables robots to comprehend instructions spoken by a human user in his/her natural language. The proposed method combines action-type classification, which is based on a support vector machine, and slot extraction, which is based on conditional random fields, both of which are required in order for a robot to execute an action. Further, by considering the co-occurrence relationship between the action type and the slots along with the speech recognition score, the proposed method can avoid degradation of the robot’s comprehension accuracy in noisy environments, where inaccurate speech recognition can be problematic. We conducted experiments using a Japanese instruction data-set collected using a questionnaire-based survey. Experimental results show that the robot’s comprehension accuracy is higher in a noisy environment using our method than when using a baseline method with only a 1-best speech recognition result.     

Evaluation of environmentally friendly lubricants for cold forging

The authors proposed double-layer-type environmentally friendly lubricants, which were composed of an undercoat, superior in adhering to a material, and an overcoat, superior in reducing the friction between the material and the die. The performance of these lubricants for cold forging was evaluated by the ring compression test, the combined forward rod-backward can extrusion-type friction test and the combined forward conical can-backward straight can extrusion-type friction test. The double-layer-type lubricants showed comparable friction characteristics and anti-pick-up properties to a conversion coating lubricant, when the film thickness and surface treatment before coating were improved. In a practical application by cold multistage forging, the double-layer-type lubricants showed a similar performance to a conversion coating lubricant.     

Analysis of the Microstructure of Mg2Si Thermoelectric Devices

High-performance Mg₂Si thermoelectric devices have been obtained by spark plasma sintering of high-purity, pre-synthesized, all-molten Mg₂Si powder. We studied the effects of source powder particle size on thermoelectric performance. To improve the performance, further investigation of the microstructure of the devices is needed. In this work we studied the microstructure of grain boundaries and interfaces between electrodes and Mg₂Si sintered bodies to increase understanding of Mg₂Si thermoelectric devices.