Synthesis and properties of cyclopentadithiophene-based poly(silarylenesiloxane) derivatives

Poly(silarylenesiloxane) derivatives with 4,4-dimethylcyclopenta[2,1-b:3,4-b′]dithiophene moiety, bearing dimethyl- (P1), methylphenyl- (P2) and diphenyl- (P3) substituents on silyl moieties, were prepared via polycondensation of the corresponding disilanol monomers, that is, 2,6-bis(dimethylhydroxysilyl)-4,4-dimethylcyclopenta[2,1-b:3,4-b′]dithiophene (M1), 2,6-bis(methylphenylhydroxysilyl)-4,4-dimethylcyclopenta[2,1-b:3,4-b′]dithiophene (M2), and 2,6-bis(diphenylhydroxysilyl)-4,4-dimethylcyclopenta[2,1-b:3,4-b′]dithiophene (M3), respectively. P1-P3 exhibited the good solubility in common organic solvents, such as benzene, toluene, chloroform, dichloromethane, THF, and so on. The glass transition temperatures (T_gs) of P1, P2 and P3 were determined by differential scanning calorimetry to be 56, 97 and 137 °C, respectively, depending on the substituent on the silyl moieties. No melting temperatures (T_ms) of P1, P2 and P3 were observed, suggesting the obtained P1-P3 are amorphous polymers. The temperatures at 5% weight loss (T_d5s) of P1, P2 and P3 were 460, 459 and 479 °C, respectively, indicating that the larger number of phenyl group on the silyl moieties resulted in the better thermostability. Bathochromic and hyperchromic effects were observed in the absorption and fluorescence spectra by introducing silyl substituents onto 4,4-dimethylcyclopenta[2,1-b:3,4-b′]dithiophene moiety. In addition, the bathochromic shift of the maximum absorption (λ_abs) and the increase in the fluorescence quantum yield (Φ_F) were observed by the introduction of phenyl group onto the silyl moieties.     

Performances of metal fluoride added carbon anodes with pre-electrolysis for electrolytic synthesis of NF3

Metal fluoride added carbon anodes treated by pre-electrolysis were investigated for electrolytic production of nitrogen trifluoride (NF₃) in molten NH₄F·KF·4HF at 100 °C. The conditions for pre-electrolysis were first optimized using a graphite sheet anode as a model anode. The formation of fluorine-graphite intercalation compounds (fluorine-GICs) with semi-covalent C–F bonds, (C_xF)_n, on the MgF₂ and CaF₂ added carbon anode surface was accelerated by pre-electrolysis at potentials less than 4.0 V. Critical current densities (CCD) on the MgF₂ added carbon anodes pre-electrolyzed under various conditions were determined, and the highest CCD was 290 mA cm⁻² obtained for that pre-electrolyzed at 3.5 V for 500 C cm⁻². This anode was successfully used in the electrolysis at 100 mA cm⁻² for 290 h and the maximum NF₃ current efficiency was 55%. From these results, it was concluded that the metal fluoride added carbon anode treated by pre-electrolysis has a high potential for electrolytic production of NF₃ at higher current density.     

Preparation and characterization of stable dispersions of carbon black and nanodiamond in culture medium for in vitro toxicity assessment

Stable dispersions of carbon black and nanodiamond in culture medium were prepared by adding a pre-mixed dispersion of commercial carbon black or nanodiamond in aqueous bovine serum albumin (BSA) solution to culture medium. Dynamic light scattering revealed that carbon black and nanodiamond dispersions prepared in both NaCl solution and culture medium were highly stable. From DLVO theory and the results of zeta potential measurements, the theoretical effect of the electrostatic interactions between adsorbed BSA molecules was found to be minimal. The asymmetric flow field-flow fractionation measurements revealed that 0.05 or 0.56 mg/mL of BSA molecules were adsorbed on 0.11 or 1.09 mg/mL of carbon black, respectively, indicating 1:2 complexation of BSA with the colloidal particles. In the case of nanodiamond, 0.06 or 0.60 mg/mL of BSA molecules were adsorbed on 0.10 or 1.05 mg/mL of nanodiamond, respectively, indicating 1:2 complexation of BSA, which is the same ratio as in the case of carbon black. The adsorbed BSA molecules served as an effective stabilizing agent for the carbon black and nanodiamond, ensuring dispersion stability for at least 1 week. The preparation of the dispersions can be easily carried out by other researchers for toxicity studies.     

In situ binary sol–gel reaction of various trifunctional alkoxysilane in the silane‐grafted polyolefin matrix and its effect upon the mechanical properties

The vinyltrimethoxysilane‐grafted ethylene‐propylene copolymer/trifunctional methoxysilane (EPR‐g‐VTMS/RTMS) composites were prepared via in situ silica sol–gel reactions. Five trifunctional methoxysilane compounds (n‐hexyltrimethoxysilane, n‐decyltrimethoxysilane, n‐tetradecyltrimethoxysilane, n‐octadecyltrimethoxysilane, and phenyltrimethoxysilane) have been selected for this study. The water‐cross‐linked EPR‐g‐VTMS/RTMS composites were characterized by attenuated total reflectance‐Fourier transform infrared spectroscopy, gel content, solid‐state ²⁹Si CP/MAS NMR, wide‐angle x‐ray scattering, tensile strength, and field emission scanning electron microscopy measurements. The type of RTMS additive has a substantial influence on the nature of siloxane band networks and eventually the mechanical tensile properties. This finding suggests that the interaction and/or entanglement between the EPR‐g‐VTMS matrix and the substituent of the RTMS additives are crucial for the modifying mechanical properties. Moreover, for the water‐cross‐linked EPR‐g‐VTMS/CnTMS (n = 6, 10, 14, and 18) composites, the joint evidence provided by attenuated total reflectance‐Fourier transform infrared spectroscopy, ²⁹Si CP/MAS NMR, and wide‐angle x‐ray scattering results suggested the formation of ladder‐type poly(n‐alkyl silsesquioxane)s and the presence of the highly ordered structure with a thickness equal to the length of two n‐alkyl groups in all‐trans conformation. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers.     

Prevention of Osteoporosis by Oral Administration of Phytate-Removed and Deamidated Soybean β-Conglycinin

Phytate-removed and deamidated soybean β-conglycinin (PrDS) prepared by ion-exchange resins was supplemented to be 4% in the diet administered to ovariectomized rats to investigate its preventive effect on osteoporosis. The apparent calcium absorption rate decreased following ovariectomy and was not replenished by oral administration of phytate-removed soybean β-conglycinin (PrS) or casein. On the other hand, administration of PrDS restored the calcium absorption rate to the same level as the sham group. Markers of bone resorption, such as serum parathyroid hormone (PTH) and urinary deoxypyridinoline (DPD), increased, and the bone mineral density and breaking stress decreased following ovariectomy. However, PrDS supplementation suppressed the changes caused by the decrease in calcium absorption from the small intestine. Therefore, PrDS supplementation shows promise for the prevention of postmenopausal osteoporosis.     

Photopolymerization synthesis of poly(N-isopropylacrylamide) hydrogels

Poly(N-isopropylacrylamide) (NIPAAm) gels were formed by photopolymerization of NIPAAm in the absence of a crosslinker using a water solvent at 25°C. Factors affecting formation were the wavelength region of irradiated light, the type of photoinitiators, and the concentrations of the photoinitiator and monomer. A high-pressure mercury lamp (400 W) was used as a light source. An NIPAAm concentration of 10 wt % and irradiation time of 15 h was used for the photopolymerization. The gel (68% yield) was formed when the quartz glass system was used, but no gelation was observed for the Pyrex glass system that transmits light with π > 290 nm. The gel (100% yield) was easily formed, even in the latter system, when 30 mmol/L of hydrogen peroxide and potassium persulfate were used as the photoinitiator. Water soluble photoinitiators such as ferric chloride and sodium anthraquinone-2,7-disulfonate were not effective for the gel formation. Yield of the gel increased with increasing the potassium persulfate concentration (1–30 mmol/L), but it decreased when a high concentration of hydrogen peroxide (60 mmol/L) was used. The gel yield increased with the NIPAAm concentration (5–20 wt %). The degree of swelling of the resultant poly(NIPAAm) gels, which was measured by immersing the gels in water at various temperatures (0–50°C) for 24 h, steeply decreased at about 30°C with increasing temperature, exhibiting a temperature-responsive character. The gels swelled and shrank in water below and above the temperature, respectively. The extent of the character depended on the concentrations of hydrogen peroxide and monomer. The formation mechanism of the gel in the photopolymerization of NIPAAm using hydrogen peroxide photoinitiator was discussed. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65:1313–1318, 1997     

Thermal depoling and relaxation property of (Na,K)NbO3 system

(Na,K)NbO₃ ceramics was synthesized by an ordinal solid state reaction method. Thermally stimulated depolarization current (TSDC) pattern of the poled ceramics was measured. Electrically poled Na_0.5K_0.5NbO₃ ceramics generated anomalous large discharge current at around 370 °C during the heating step due to the thermal relaxation of oxygen vacancy. The oxygen vacancy piled up around electrodes and formed the electrically inhomogeneous structure in the ceramics. In addition, the anomalous current of K-riched ceramics was larger than that of Na-riched one. This result suggested that the equilibrium composition of NaNbO₃–KNbO₃ system was near to Na-riched composition against Na_0.5K_0.5NbO₃.     

采用MAMMOS技术的高密度光记录

MAMMOS(Magnetic Amplifying Magneto－ Optical System:磁畴扩大磁光系统 )是实现高密度磁光盘的有效方法。不仅能得到不依赖于磁畴长度的较大的读出信号振幅,而且还能实现超出光学系统衍射极限的分辨率。过去,为实现磁畴的复印与扩大,要对记录膜面施加垂直方向的外部磁场。而现在得知,同时施加垂直磁场和水平方向的磁场,可大幅度地提高微小磁畴的读出特性。确认采用施加水平磁场的方法,在λ =635 nm, NA=0.55的条件下, 0.15μ m的连续磁畴也能获得 BER=2× 10－ 4的读出效果。     

Study of the Antioxidative Properties of Several Amino Acid-Type Surfactants and their Synergistic Effect in Mixed Micelle

Cysteine and methionine, two sulfur-containing amino acids (AA), were introduced in their surfactant forms as potential antioxidants. The antioxidative (AOX) properties of lauroyl methionine (C12-Met) and lauroyl cysteine (C12-Cys) was investigated by means of the oxygen radical absorbance capacity assay. Both the surfactants exhibited excellent AOX behavior at the premicellar state and micellar medium. The AOX behavior was found to be comparable for both the surfactants at their premicellar states. However, in micellar medium, C12-Met showed better AOX property than C12-Cys. The AOX power of the surfactants was compared with other previously developed AA-type surfactants. The order of the AOX power was found to be: C12-tryptophan > C12-tyrosine ≈ C12-methionine ≈ C12-cysteine > C12-histidine at the premicellar state and C12-tryptophan > C12-tyrosine > C12-methionine > C12-cysteine > C12-histidine at the micellar state. C12-Cys displayed lower AOX property in micellar medium due to its dimer formation tendency. Based on the HPLC and UPLC-Q-TOF-MS analysis, the dimer formation of C12-Cys was found to be accelerated due to the micellar environment and results into negative synergistic effect on other aromatic AA-type surfactants. However, the presence of C12-His in the micellar solution of C12-Cys resulted no synergistic effect due to stronger H-bonding between the surfactants and resulting less dimer formation.     

Spray-dry synthesis of β-Cu1.8Zn0.2V2O7 ceramic fine particles showing giant negative thermal expansion

We used spray-dry method to synthesize fine powder of β-Cu_1.8Zn_0.2V₂O₇ showing large negative thermal expansion (NTE) linearly to temperature over a wide temperature range. The NTE of β-Cu_1.8Zn_0.2V₂O₇ is produced by microstructures consisting of voids and anisotropic thermal deformation of crystal grains in ceramics. By reducing the size of the microstructures that produce NTE, large NTE equivalent to that of bulk was realized, even for ceramic particles of about 2 μm size. Comparison with particles produced using a conventional method demonstrates that the particle size distribution is narrow and that the particles are nearly spherical. This achievement is expected to pave the way to use of NTE materials in micrometer-scale control of thermal expansion.