Verification of Iron Loss Calculation Method Using a High‐Precision Iron Loss Analyzer

Because of the improved performance of power devices, the volume of the ac filter inductors used in high‐frequency PWM inverters has been reduced. However, the temperature rise in the filter inductor due to this miniaturization has become more pronounced. Therefore, we have proposed an iron loss calculation method for the ac filter inductor. However, the accuracy of the value calculated via the loss map method cannot be verified, because the iron loss arising during each switching period cannot be measured with conventional power measuring instruments. In order to resolve this problem, we developed an inductor loss analyzer (ILA), which allows precise measurement of the iron loss in the inductor during each switching period. The accuracy of the calculation of iron loss in the filter inductor by the loss map method was verified with the ILA. We found that the value calculated by the loss map method differed slightly from the value measured with the ILA. However, these differences can be reduced if we take into account the accurate flux density calculation and the effect of the duty ratio of PWM pulses on the loss. Finally, we verified that the loss map method can provide accurate iron loss calculations.     

Effects of Smart Charging of Multiple Electric Vehicles in Reducing Power Generation Fuel Cost

The high penetration of variable sources of renewable power generation will lead to operational difficulties in supply/demand balancing in the entire power system. The mass deployment of electric vehicles (EVs) and plug‐in hybrid vehicles (PHEVs) will also cause significant changes in electricity demand. Therefore, controlling and managing the charging time of EVs/PHEVs are effective approaches that are imperative for improving balancing in power system operation. We assumed travel patterns for EVs in a model of the future Tokyo power system and analyzed the power system loads, including the charging load of the EVs, under several charging control scenarios. We verified that charging time controls are substantially effective for reducing the fuel costs in the power system. Further, we found that load leveling under a multicar charging management scenario gave the best results in terms of the fuel costs in all cases.     

Iron Loss Calculation of AC Filter Inductor for Three‐Phase PWM Inverters

In recent years, remarkable advancement of new power semiconductor devices, such as SiC and GaN, enables the increase of switching frequency of power converters, and hence the volume of passive components, such as ac filters and transformers, can be reduced. However, temperature rise caused by the inductor loss is increasing, and hence iron loss evaluation of the inductor is one of the most important issues to realize high power density converters. Conventionally, an improved generalized Steinmetz equation (iGSE) has proposed in order to calculate the iron loss under a pulse voltage magnetizing condition. However, accurate iron loss calculation of the ac filter inductor used in a PWM inverter cannot be realized. The authors have proposed two methods of iron loss evaluation of ac filter inductors. The first one is a loss map method which can calculate the iron loss without using a real PWM inverter. Another one is an ILA (Inductor Loss Analyzer) which can measure the iron loss in every switching period in a real PWM inverter. In this paper, comparisons of the iron loss between the ILA and the loss map method on both the single‐phase and three‐phase inverters are studied. It is found that iron loss of the ac filter inductor in the three‐phase PWM inverter which is calculated by the loss map method cause a large error on a specific condition. In order to prevent the calculation error, the authors proposed a revised loss map method and proved the effectiveness of the method.     

Effect of re-oxidation on dielectric properties in Ni-MLCC

The effect of re-oxidation treatment on the solubility of dopants and the dielectric properties of rare-earths (La, Ho) and V-substituted BaTiO₃ solid solutions, assuming the shell phase of X7R dielectrics, was investigated. Ho-V-substituted samples showed larger increase of the lattice parameter and T _c by re-oxidation treatment compared with La-V-substituted samples. Electron spin resonance measurements revealed that the oxidation of V³⁺ to V⁴⁺ or V⁵⁺ appeared in the range in which the increase of lattice parameter by re-oxidation treatment was observed. This suggests that the increase of T _c is due to the change of preferential occupational site of Ho ion from A-site to B-site, being accompanied with the oxidation of V³⁺. We also investigated the effect of re-oxidation treatment on the electrical properties and microstructure in Ni-MLCC samples, using rare-earths (La, Ho, Yb) and acceptors (Mn, V) doped BaTiO₃ based X7R dielectrics. The change in temperature characteristic of the dielectric constant by re-oxidation treatment was observed for the MLCC samples containing V with smaller content. In the case of Ho-V- and Yb-V-doped samples showed larger increase of the dielectric constant at around 120 °C compared with La-V-doped samples. The relationship between the microstructure and electrical properties of the MLCC sample was investigated by impedance measurement at elevated temperature.     

Calibration of multiple kinects with little overlap regions

When using multiple Kinects, there must be enough distances among neighboring Kinects to avoid spoiled range data caused by the interference of their infrared speckle patterns. In the arrangement, their overlapped regions are too small to apply existing calibration methods using correspondences between their observations straightforwardly. Therefore, we propose a method to calibrate Kinects without large overlapped regions. In our method, first, we add extra RGB cameras in an environment to compensate overlapped regions. Thanks to them, we can estimate their camera parameters by obtaining correspondences between color images. Next, for accurate calibration, which considers range data as well as color images of Kinects, we optimize the estimated parameters by minimizing both the errors of correspondences between color images and those of range data of planar regions, which exist in a general environment such as walls and floors. Although our method consists of conventional techniques, its combination is optimized to achieve the calibration. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Photopolymerization synthesis of poly(N-isopropylacrylamide) hydrogels

Poly(N-isopropylacrylamide) (NIPAAm) gels were formed by photopolymerization of NIPAAm in the absence of a crosslinker using a water solvent at 25°C. Factors affecting formation were the wavelength region of irradiated light, the type of photoinitiators, and the concentrations of the photoinitiator and monomer. A high-pressure mercury lamp (400 W) was used as a light source. An NIPAAm concentration of 10 wt % and irradiation time of 15 h was used for the photopolymerization. The gel (68% yield) was formed when the quartz glass system was used, but no gelation was observed for the Pyrex glass system that transmits light with π > 290 nm. The gel (100% yield) was easily formed, even in the latter system, when 30 mmol/L of hydrogen peroxide and potassium persulfate were used as the photoinitiator. Water soluble photoinitiators such as ferric chloride and sodium anthraquinone-2,7-disulfonate were not effective for the gel formation. Yield of the gel increased with increasing the potassium persulfate concentration (1–30 mmol/L), but it decreased when a high concentration of hydrogen peroxide (60 mmol/L) was used. The gel yield increased with the NIPAAm concentration (5–20 wt %). The degree of swelling of the resultant poly(NIPAAm) gels, which was measured by immersing the gels in water at various temperatures (0–50°C) for 24 h, steeply decreased at about 30°C with increasing temperature, exhibiting a temperature-responsive character. The gels swelled and shrank in water below and above the temperature, respectively. The extent of the character depended on the concentrations of hydrogen peroxide and monomer. The formation mechanism of the gel in the photopolymerization of NIPAAm using hydrogen peroxide photoinitiator was discussed. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65:1313–1318, 1997     

Effect of poly(vinyl acetate/vinyl alcohol) copolymer with a thiol end group as a steric stabilizer on dispersion polymerization of styrene

In dispersion polymerization of styrene in ethanol, effects of a reactive steric stabilizer, poly(vinyl acetate/vinyl alcohol) copolymer with a thiol end group (P(VAc/VA)-SH), were investigated. In the absence of the thiol end group, the dispersion coagulated at the middle stage of the polymerization, while in the presence of the thiol end group, the polymerization proceeded successfully to result in close to monodisperse particles. The reactive thiol group acts as a site of formation of the block copolymer, that is, polystyrene-b-P(VAc/VA), which is utilized as an effective dispersant. From the measurement on molecular weights during the course of polymerization, two polymerization loci were realized. Addition of butyl methacrylate to styrene affected markedly not only rate of polymerization but also particle size. © 1996 John Wiley & Sons, Inc.     

Multifaceted Analysis of IL-23A- and/or EBI3-Including Cytokines Produced by Psoriatic Keratinocytes

Interleukin (IL) 23 (p19/p40) plays a critical role in the pathogenesis of psoriasis and is upregulated in psoriasis skin lesions. In clinical practice, anti-IL-23Ap19 antibodies are highly effective against psoriasis. IL-39 (p19/ Epstein-Barr virus-induced (EBI) 3), a newly discovered cytokine in 2015, shares the p19 subunit with IL-23. Anti-IL-23Ap19 antibodies may bind to IL-39; also, the cytokine may contribute to the pathogenesis of psoriasis. To investigate IL23Ap19- and/or EBI3-including cytokines in psoriatic keratinocytes, we analyzed IL-23Ap19 and EBI3 expressions in psoriasis skin lesions, using immunohistochemistry and normal human epidermal keratinocytes (NHEKs) stimulated with inflammatory cytokines, using quantitative real-time polymerase chain reaction (RT-PCR), enzyme-linked immunosorbent assay (ELISA), and liquid chromatography-electrospray tandem mass spectrometry (LC-Ms/Ms). Immunohistochemical analysis showed that IL-23Ap19 and EBI3 expressions were upregulated in the psoriasis skin lesions. In vitro, these expressions were synergistically induced by the triple combination of tumor necrosis factor (TNF)-α, IL-17A, and interferon (IFN)-γ, and suppressed by dexamethasone, vitamin D3, and acitretin. In ELISA and LC-Ms/Ms analyses, keratinocyte-derived IL-23Ap19 and EBI3, but not heterodimeric forms, were detected with humanized anti-IL-23Ap19 monoclonal antibodies, tildrakizumab, and anti-EBI3 antibodies, respectively. Psoriatic keratinocytes may express IL-23Ap19 and EBI3 proteins in a monomer or homopolymer, such as homodimer or homotrimer.     

Prevention of Osteoporosis by Oral Administration of Phytate-Removed and Deamidated Soybean β-Conglycinin

Phytate-removed and deamidated soybean β-conglycinin (PrDS) prepared by ion-exchange resins was supplemented to be 4% in the diet administered to ovariectomized rats to investigate its preventive effect on osteoporosis. The apparent calcium absorption rate decreased following ovariectomy and was not replenished by oral administration of phytate-removed soybean β-conglycinin (PrS) or casein. On the other hand, administration of PrDS restored the calcium absorption rate to the same level as the sham group. Markers of bone resorption, such as serum parathyroid hormone (PTH) and urinary deoxypyridinoline (DPD), increased, and the bone mineral density and breaking stress decreased following ovariectomy. However, PrDS supplementation suppressed the changes caused by the decrease in calcium absorption from the small intestine. Therefore, PrDS supplementation shows promise for the prevention of postmenopausal osteoporosis.     

Heteroepitaxial growth of thick 3C-SiC (110) films by Laser CVD

Previously, we found 3C-SiC films favor to grow in <111> orientation on Si (110) ( https://doi.org/10.1111/jace.15260 ). However, epitaxial growth of thick <110>-3C-SiC is still a big challenge. In this study, thick 3C-SiC (110) epitaxial films were prepared on Si (110) substrate by laser chemical vapor deposition (LCVD) using hexamethyldisilane (HMDS) in H₂ atmosphere. The investigation of growth mechanism showed that the laser of LCVD played an important role during the depositions. Observation by high-resolution transmission electron microscopy (HRTEM) revealed that the interface of 3C-SiC (110)/Si (110) exhibited rough texture at atomic level. The atomic roughness on Si (110) surface could be a key factor for 3C-SiC (110) nucleation. The growth of thick 3C-SiC (110) epitaxial films could be very promising for new development in power electronics applications.