Increase in urinary calcium and oxalate after fructose infusion

We have previously shown that an oral glucose load increased both calciuria and oxaluria while the ingestion of fructose induced a rise in calciuria and a decrease in oxaluria. This latter effect remains unclear and might be linked to the reduced intestinal oxalate absorption subsequent to digestive intolerance in some subjects. Such a hypothesis could be enlightened by the study of a parenteral fructose load. Therefore in 7 healthy subjects, we compared the effects of fructose infusion (F) (15 min iv infusion at 0.185 mmol/kg BW/min) to a control glucose infusion (G) on urinary calcium and oxalate. In this study, glycemia and insulinemia increased less after (F) than after (G) (respectively + 21% vs + 216%, p < 0.001 and + 230% vs + 402%, p < 0.05) and phosphatemia decreased less after (F) than after (G) (-7% vs -14%, p < 0.05). Urinary calcium and oxalate increased only after (F) (respectively + 64%, p < 0.01 and + 60%, p < 0.05). Urinary uric acid, another urolithiasis factor, increased after both (F) and (G) (respectively + 45%; p < 0.01 and + 42%; p < 0.01) but uricemia increased only after (F) (+ 25%; p < 0.01). Our results suggest an additional reason to avoid the use of fructose in parenteral nutrition, particularly in individuals with a known history of either calcium oxalate or urate urolithiasis.     

Possibilities and extension of XRD material response analysis in failure research for the advanced evaluation of the damage level of Hertzian loaded components

Due to clearly distinguishable damage symptoms, it is differentiated between the surface and sub‐surface failure mode of rolling bearings. Material states red out by X‐ray diffraction (XRD) residual stress measurements point to a variety of loading conditions especially at raceway surfaces that are associated with several competing failure mechanisms. The corresponding lifetime reduction can range from the lower fatigue strength region to material ratcheting in extreme cases. Relevant position of the microstructural changes and nature of the failure mechanisms are characterized. The time alteration of the XRD material parameters measured at or near the surface and at the depth of the maximum equivalent stress correlates, in a different manner, with the statistical parameter of the 10 % bearing life. Both failure modes are illustrated by concrete examples. Contaminated lubricant and boundary lubrication, which represent practically important surface‐induced failures, are discussed in more detail. Gray staining, i.e. shallow pitting, often occurs without distinct indication of global material aging by means of XRD characteristics. Here, scanning electron microscopy observations and electron microprobe analyses point to corrosion fatigue as acting surface failure mechanism. The interaction between material and lubricant under complex loading regimes particularly of mixed friction and corrosion opens further failure research areas in the field of tribology.     

Energy-aware wireless networking with directional antennas: the case of session-based broadcasting and multicasting

We consider ad hoc wireless networks that use directional antennas and have limited energy resources. To explore quantitatively the advantage offered by the use of directional antennas over the case of omnidirectional antennas, we consider the case of connection-oriented multicast traffic. Building upon our prior work on multicasting algorithms, we introduce two protocols that exploit the use of directional antennas and evaluate their performance, We observe significant improvement with respect to the omnidirectional case, in terms of both energy efficiency and network lifetime. Additionally, we show that further substantial increase in the network's lifetime can be achieved by incorporating a simple measure of a node's residual energy into the node's cost function.     

Lipase‐catalyzed dynamic kinetic resolution of (R,S)‐fenoprofen thioester in isooctane

A lipase‐catalyzed enantioselective hydrolysis process under in situ racemization of the remaining (R)‐thioetser substrate with trioctylamine as the catalyst was developed for the production of (S)‐fenoprofen from (R,S)‐fenoprofen 2,2,2‐trifluoroethyl thioester in isooctane. Detailed investigations of trioctylamine concentration on the enzyme activation and the kinetic behavior of the thioester in racemization and enzymatic reactions were conducted, in which good agreement between the experimental data and theoretical results was observed. © 2002 Society of Chemical Industry     

A new millimeter-wave step-frequency radar sensor for distancemeasurement

A new compact millimeter-wave distance-measurement sensor prototype has been developed. The sensor is a step-frequency radar implemented using coherent heterodyne technique. It operates in Ka-band (26.5-40 GHz) and is realized using MICs and MMICs. The sensor transmits sinusoidal signals of incremental frequencies and demodulates the received signals into base-band I/Q signals for processing. Experimental results show that the sensor is capable of measuring distance with less than 0.2 inch of absolute error and a low transmitted power of only -20±3 dBm     

Computation of the average power pattern of a reflector antennawith random surface errors and misalignment errors

To specify manufacturing tolerances of a reflector antenna, various errors such as random surface errors and misalignment errors must be considered at one time because superposition of the effects of those errors may not hold. Based on the Rahmat-Samii's formulation (1983), a method for computing efficiently the average power pattern of a reflector antenna with those errors is presented. Simulation results show that superposition of the effects of errors does not generally hold and demonstrate how those errors degrade the peak-gain and sidelobe levels     

A selective CVD tungsten-strapped polysilicon local interconnectiontechnology

A local interconnection technology utilizing polysilicon strapped with selective-chemical-vapor-deposited (CVD) tungsten has been developed. Both n- and p-channel MOS transistors have been successfully fabricated using this technology. Tungsten deposited on polysilicon is an attractive gate shunt and local interconnection material because of its low resistivity, immunity to dopant segregation and diffusion, and resistance to electromigration. A potential problem of this technology is the excessive diode leakage current associated with strapping shallow source/drain diodes with tungsten. The leakage is attributed to defects induced by the heavy source/drain implant, which can be effectively eliminated with a proper annealing procedure     

An analysis of multiple parallel coupled quasi-tem transmission lines

A theoretical analysis of general multiple parallel coupled transmission lines in an inhomogeneous medium is presented. The analysis is based on the generalized telegraphists' equation. It is relatively simple and has the advantage of giving explicit solutions for the properties of the coupled-line system. Considerations are also given to a coupled-line structure whose lines have the same characteristic impedance. Results for two and three coupled lines are found in agreement with those published previously.     

X gene and precore region mutations in the hepatitis B virus genome in persons positive for antibody to hepatitis B e antigen: comparison between asymptomatic "healthy" carriers and patients with severe chronic active hepatitis

Hepatitis B virus (HBV) carriers with antibody to hepatitis e antigen comprise asymptomatic carriers (ASCs), who have low replication levels of HBV, and patients with chronic active hepatitis (CAH), who have high levels of viral replication. To investigate whether defects in the X protein might be responsible for this difference in the level of viral replication, nucleotide sequences of X and precore gene regions in serum HBV were analyzed in 19 ASCs and 9 CAH patients. All patients had a point mutation creating a stop codon in the precore region. Seventeen ASCs (87.3%) had identical mutations consisting of 4 noncontiguous 1-bp deletions or an 8-bp deletion, both of which truncate the normal X protein, whereas no CAH patient had an X gene mutation (P < .001). Thus, deletion of the X protein might be responsible for the low levels of viral replication in ASCs.