Polyacrylonitrile‐carbon Nanotube‐polyacrylonitrile: A Versatile Robust Platform for Flexible Multifunctional Electronic Devices in Medical Applications

Flexible multifunctional electronic devices are of high interest for a wide range of applications including thermal therapy and respiratory devices in medical treatment, safety equipment, and structural health monitoring systems. This paper reports a scalable and efficient strategy of manufacturing a polyacrylonitrile‐carbon nanotube‐polyacrylonitrile (PAN‐CNT‐PAN) robust flexible platform for multifunctional electronic devices including flexible heaters, temperature sensors, and flexible thermal flow sensors. The key advantages of this platform include low cost, porosity, mechanical robustness, and electrical stability under mechanical bending, enabling the development of fast‐response flexible heaters with a response time of ≈1.5 s and relaxation time of ≈1.7 s. The temperature‐sensing functionality is also investigated with a range of temperature coefficient of resistances from ?650 to ?900 ppm K^?1. A flexible hot‐film sensing concept is successfully demonstrated using PAN‐CNT‐PAN with a high sensitivity of 340 mV (m s^?1)^?1. The sensitivity enhancement of 50% W^?1 is also observed with increasing supply power. The low cost, porosity, versatile, and robust properties of the proposed platform will enable the development of multifunctional electronic devices for numerous applications such as flexible thermal management, temperature stabilization in industrial processing, temperature sensing, and flexible/wearable devices for human healthcare applications.     

Synthesis and properties of styrene–EPDM–vinyl acetate graft polymer

The styrene–EPDM–vinylacetate (SEV) graft polymer, which linked respectively the styrene (St) unit and vinylacetate the (VAc) unit to the ethylene–propylene–diene terpolymer (EPDM) backbone was synthesized by two‐step graft polymerizations: First the graft polymerization of VAc onto EPDM was carried out, and then St was added successively in the prepolymerized solution and further polymerized for a given period to obtain SEV. The effects of concentration of EPDM and an initiator, mole ratio of VAc to St, polymerization time, temperature, and solvent were examined on the graft polymerizations. The synthesized graft polymers (SEVs) that have different contents of St or VAc were identified by Fourier transform IR spectrum. The highest graft ratio has been obtained by 10 wt % of EPDM, 1.0 mole ratio of VAc to St, and 1.0 wt % of BPO in toluene for 48 h at 70°C. The glass transition temperature of SEV is lower than that of poly(vinyl acetate) (PVAc) and polystyrene (PS). The thermal stability of SEV is higher than that of PVAc, PS, and the acrylonitrile–butadiene–styrene (ABS) resin. The tensile strength of SEV was improved as compared with that of EPDM. The light resistance and weatherability of SEV were better than those of ABS. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2296–2304, 2000     

Identification of depigmenting components from <Emphasis Type=Italic>Nigella glandulifera</Emphasis> Freyn

To develop a novel skin depigmenting agent from natural sources, the inhibition of melanogenesis by Chinese plants, N. glandulifrea, was evaluated. The methanol extract of this plant showed significantly down-regulated melanin synthesis in a dose-dependent manner at a non-toxic concentration in cultured B16F10 mouse melanoma cells. This extract was further fractionated by using solvent-solvent partition and silica open column chromatography to identify the active components. From GC-MS data, oleic acid methyl ester was found as one of the depigmenting agents. In conclusion, we suggest that this fraction may be a safe and effective depigmentation agent.     

Effects of Process Parameters on Gypsum Scale Formation in Pipes

Scaling often leads to a series of technical and economical problems in industrial plants and equipments by blocking water flow in pipes or limiting heat transfer in heat exchangers. While most contemporary studies are focusing on crystallization at heat‐exchanger surfaces and scaling on nanofilters in desalination plants, very little work has been done investigating scale formation on pipe and vessel walls. A comprehensive investigation of the effects of various process parameters in controlling the formation of calcium sulfate scale in pipes was undertaken. Supersaturation ratio, run time, and operational hydrodynamics were altered systematically to determine their influence on the scale growth rate. The results confirmed that the deposition of gypsum on pipe walls was significantly affected by these process parameters.     

Hydrogen Generation from CO2 Reforming of Biomass-Derived Methanol on Ni/SiO2 Catalyst

Topics in Catalysis - CO2 reforming of methanol for producing hydrogen was experimentally carried out in a fixed-bed reactor on 10%Ni/SiO2. The 10%Ni/SiO2 was completely reduced during H2...     

Synthesis and properties of natural rubber modified with stearyl methacrylate and divinylbenzene by graft polymerization

The graft polymerizations of stearyl methacrylate (SMA) and divinylbenzene (DVB) onto natural rubber (NR) were carried out in a solution process using benzoyl peroxide (BPO) as an initiator in toluene or chloroform. The main products of the grafted NR include an uncrosslinked (sol) part [sol(SMA–NR–DVB): s‐SNRD] and a crosslinked (gel) part [gel(SMA–NR–DVB), g‐SNRD]. s‐SNRD was obtained by extraction using tetrahydrofuran. It was identified by IR and ¹H‐NMR spectroscopies. The glass transition temperature (T_g) and thermal properties of s‐SNRD and g‐SNRD were studied by DSC and TGA. The glass transition temperature and thermal decomposition temperature of s‐SNRD and g‐SNRD were higher than were those of NR. The light resistance and weatherability of s‐SNRD were measured with a Weather‐o‐Meter. The light resistance and weatherability of s‐SNRD are better than are those of NR. The effects of the initiator concentration, mol ratio of SMA to DVB, reaction time, temperature on grafting ratio, and crosslinking ratio were investigated. The highest grafting ratio and crosslinking ratio in the graft polymerization of SMA and DVB onto NR were obtained when the mol ratio of SMA to DVB and BPO were 4.0 and 2 wt %, at 80°C for 48 h, respectively. Following several studies on oil‐absorptive polymers in our laboratory, 9 the oil absorptivity of g‐SNRD was examined using crude oil. The oil absorptivity of g‐SNRD was 600% when the immersion time was 10 min. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 79: 2464–2470, 2001     

Effect of intumescent compositions on flammable properties of ethylene vinyl acetate and polypropylene

An intumescent flame retardant (IFR) system was prepared by 2 ways. Firstly, bis(2,6,7‐trioxa‐1‐phosphabicyclo[2,2,2]octane‐1‐oxa‐4‐hydroxymethyl) phosphonate methyl (bis‐PM) was synthesized and characterized by ¹H nuclear magnetic resonance (NMR), ³¹P NMR, and Fourier transform infrared spectroscopies. This carbonization agent was mixed with melamine (ME), ammonium polyphosphate (APP), and pentaerythritol (PER) to constitute an IFR system. Secondly, an IFR system by reaction was prepared by reaction, and the presence of compositions in product was confirmed by ¹H NMR and Fourier transform infrared. Both of systems enhanced the flammable retardation of ethylene vinyl acetate (EVA) and polypropylene (PP). Flammability and thermal behaviors of IFR‐EVA and IFR‐PP were investigated by vertical burning test (UL‐94 V) and thermogravimetric analysis. Results indicated that the IFR systems performed excellent flame retardancy and antidripping ability for PP. At 30 wt% loading, the optimum flame retardant formulations that are bis‐PM/ME: 4/1, bis‐PM/ME/PER: 3/1/1, APP/ME/PER: 3/1/1, and bis‐PM/ME/PER/APP: 1.5/1.5/1/1 give UL‐94 V‐0 rating. However, V‐0 rating results were only obtained for EVA when systems contain bis‐PM/ME: 4/1 and bis‐PM/ME/PER: 3/1/1. The char yield from decomposition of the IFR‐EVA and IFR‐PP has effects on the flame retardancy and antidripping behaviors of EVA and PP.     

Preparation and characterization of ordered mesoporous Mg–Al–Co hydrotalcite based catalyst for decarboxylation of jatropha oil

This paper reported preparation of novel order mesoporous Mg–Al–Co hydrotalcite based catalysts through sol–gel procedure using precursors such Mg(NO₃)₂, Al(NO₃)₃ and Co(NO₃)₂ and Na₂CO₃. The catalyst also contained both acidity and basicity being very convenient for decarboxylation process of vegetable oil to green hydrocarbons. The alkaline media was maintained at pH 10 during the processes. Molar ratio of metal cations and temperature of the sol–gel processes were investigated for their effect in the mesoporous structure formation. The results showed that the procedure should be established at 70 °C with the molar Mg/Al/Co ratio of 1/5/0.2. Acidity and basicity of the mesoporous hydrotalcite based catalyst were demonstrated for their co-existence. The as-synthesized material at the suitable conditions was used as catalyst for decarboxylation of jatropha oil to obtain green hydrocarbons mainly belonging to diesel fraction. The decarboxylation was carried out at 400 °C for 3 h in closed auto-pressurized reactor exhibiting a yield of diesel involving hydrocarbons of over 70% after distillation and analysis. The result also confirmed that the acidity and basicity greatly accelerated the activity of the catalyst. Some techniques were used to characterizing the catalyst including XRD, SEM, TEM, TGA, NH₃-TPD, CO₂-TPD and BET, and GC–MS was also used to analyze the main product composition.     

X-ray absorption spectroscopies of Mg-Al-Ni hydrotalcite like compound for explaining the generation of surface acid sites

Hydrotalcite-like compound containing metal cations such as Mg²⁺, Al³⁺ and Ni²⁺ was characterized using Ni K-edge EXAFS and in situ Ni K-edge XANES techniques for clarifying its bonding environment around Ni²⁺ sites and structure changes during calcination from room temperature to 550 °C, respectively. At the fixed molar ratio of Mg/Ni/Al of 2/1/1, the results obtained from EXAFS analysis showed a slight blue shift before and after the calcination at 550 °C and a reduction in white line peak; the best fits of the two samples revealed tiny change in coordination number about 7 for Ni-O path but considerable difference for Ni-Mg(Al) path from about 4.5 to 9.5, confirming a modification from brucite like to mixed oxide structure. On the other hand, bond distances of the Ni-O and Ni-Mg paths nearly fixed at about 2.06 Å to 3.0 Å reflected stability of the cationic bond order on each plane, but partial collapse and decomposition of the interlayer formed by water molecules and anion CO ₃ ^2? after the calcination. Linear combination fit extracted from the in situ Ni K-edge XANES also confirmed the changes along with the calcination such as slow and fast decreases of brucite fraction at 150 °C and 330 °C, respectively, in corresponding to the mixed oxide fraction increases. The achieved bonding structures were also applied to explain acid-base occurrence of the hydrotalcite-like material, especially the acid sites generated by different static charges along with the bonds. The explanation was illustrated by NH₃-TPD method.