Imaging the domain pattern of the canted magnetization state in Co/Pt multilayer films

The exact magnetization pattern of magnetic films close to a spin-reorientation transition is difficult to analyze due to the intrinsically three-dimensional (3d) variation of the orientation of the local magnetization. We present a technique how this can be performed, based on the analysis of high quality 2d polarization maps from a single scanning electron microscope with polarization analysis (SEMPA) measurement with tilted sample. The key tool is the statistical distribution of all occurring polarization doublets, visualized in a 2d histogram plot. From the shape of the distribution the type of transition—canted-phase, or coexisting phases—can be inferred. For the canted-phase state, the canting angle can be accurately determined from geometrical considerations. With help of the histogram the image data can be analyzed and the three components of the magnetization can be calculated for most points of the image. For a Co/Pt multilayer film we found a cone state. The magnetization forms a complex pattern consisting of out-of-plane domains while the in-plane magnetization shows a maze pattern.     

Radiale Wärmeleitung in durchströmten Schüttungsrohren

Heat Transport to the Wall of Packed Tubes. Radial conduction of heat in packed tubes has a crucial influence on yield and selectivity of many heterogeneously catalyzed reactions. In spite of many years of intensive research in the field, there are still tremendous discrepancies between correlations of different origin. Even the standard model using two constant heat transport parameters, which was introduced in the fifties and has since become most widely accepted, has been controversially discussed and called into question. The unsatisfactory state of the art has been an incentive for several groups of researchers to take up this old topic once again. Three parallel experimental investigations on heat transport with air flowing in packed tubes of similar dimensions, electrically heated, steam-heated, or water-cooled, were completed in 1991. Comparative evaluation of the results of these three investigations, together with other data from the relevant literature, now provides the first clear answers to some of the questions so controversially discussed in the past.     

Autothermal two-stage gasification of low-density waste-derived fuels

In order to increase the efficiency of waste utilization in thermal conversion processes, pre-treatment is advantageous. With the Herhof Stabilat^® process, residual domestic waste is upgraded to waste-derived fuel by means of biological drying and mechanical separation of inerts and metals. The dried and homogenized waste-derived Stabilat^® fuel has a relatively high calorific value and contains high volatile matter which makes it suitable for gasification. As a result of extensive mechanical treatment, the Stabilat^® produced is of a fluffy appearance with a low density. A two-stage gasifier, based on a parallel-arranged bubbling fluidized bed and a fixed bed reactor, has been developed to convert Stabilat^® into hydrogen-rich product gas. This paper focuses on the design and construction of the configured laboratory-scale gasifier and experience with its operation. The processing of low-density fluffy waste-derived fuel using small-scale equipment demands special technical solutions for the core components as well as for the peripheral equipment. These are discussed here. The operating results of Stabilat^® gasification are also presented.     

Kommentar I

Ohne Zusammenfassung     

Schnelle Lochkorrosion durch ungewöhnliche Anodenstabilisierung in einem Stahl/Wasser-System

Fast pitting corrosion in a steel/water system as a result of unusual stabilization of anodes Corrosion damage as a result of fast pitting was observed in industrial equipment made of unalloyed steel. The rate of formation and the manifestation of the pits are similar to pitting corrosion of stainless steels. Estimation of the kinetics of the localized corrosion in terms of differential aeration cells led to a model which indicates the stabilization of small anodic regions. The stabilization was caused by precipitation of the products of reaction between ferrous ions and polymeric silicate. The high rate of pitting also suggests that the oxygen entering the system during service periods involving the exposure of the system to air has enhanced the corrosion. These ideas could be substantiated by experiments, which also revealed particularly the effect of the concentration of NaCl. Anodic passivation by the addition of Na₂CO₃ or perhaps inhibition may be considered as candidate protective measures.     

Autoklaven-Untersuchungen der Spannungsrißkorrosion von Fe-Cr-Ni-Legierungen in NaCl/Co2/H2S-Medien

Autoclave investigation of stress corrosion cracking behaviour of Fe-Cr-Ni alloys in NaCl/CO₂/H₂S-environment In oil and gas production, the corrosion problems increase as the depth of the reservoirs increases. The oil and gas products contain chloride-rich waters and mixtures of H₂S and CO₂ at high pressures and temperatures. Materials that can be used under these conditions are only high strength high alloy steels and nickel base alloys. These materials must be assessed for corrosion resistance under these conditions. The environment contain chloride ions and hydrogen sulphide, which are known to be critical components for SCC. With the aid of autoclave experiments, the fields of corrosion resistance for the materials no. 1.4462, 1.4563 and 2.4618 were determined as a function of temperature and hydrogen sulphide pressure. The base environment was a 5 Molar sodium chloride solution at 20 bar carbon dioxide. While the corrosion resistance of the duplex steel, material no. 1.4462, decreases markedly as the strength of the material and the hydrogen sulphide pressure increase, the two austenitic materials are completely resistant up to 300 °C and hydrogen sulphide pressure of 15 bar. Only at 300 °C and high partial pressures of hydrogen sulphide the material no. 1.4563 did fail, when stressed to stress levels higher than the YS. The crack path was predominantly transgranular with minute fractions of intergranular cracking. The microstructure appears to have no effect. All results indicate that a mixed mechanism of hydrogen- and chloride induced SCC is operting, while a corrosion enhancement due to interaction of both critical components takes place.     

Co-Channel Operation of Macro- and Femtocells in a Hierarchical Cell Structure

In this paper, the feasibility of user-deployed femtocells in the same frequency band as an existing macrocell network is investigated. Key requirements for co-channel operation of femtocells such as auto-configuration and public access are discussed. Methods for femtocell power auto-configuration that ensure a constant cell radius in the downlink, and a low pre-definable interference impact on co-channel macrocells in the uplink are proposed. The theoretical performance of randomly deployed femtocells in such a hierarchical cell structure and the resulting impact on existing co-channel macrocells is analysed for a cellular UMTS network using system level simulations.     

Impact of the floating-point precision and interpolation scheme on the results of DNS of turbulence by pseudo-spectral codes

In this paper we investigate the impact of the floating-point precision and interpolation scheme on the results of direct numerical simulations (DNS) of turbulence by pseudo-spectral codes. Three different types of floating-point precision configurations show no differences in the statistical results. This implies that single precision computations allow for increased Reynolds numbers due to the reduced amount of memory needed. The interpolation scheme for obtaining velocity values at particle positions has a noticeable impact on the Lagrangian acceleration statistics. A tri-cubic scheme results in a slightly broader acceleration probability density function than a tri-linear scheme. Furthermore the scaling behavior obtained by the cubic interpolation scheme exhibits a tendency towards a slightly increased degree of intermittency compared to the linear one.     

The Swedish approach to research and development in fire protection

Current Research Activities

The Swedish approach to research and development in fire protection