A power-free deposited microbead plug-based microfluidic chip for whole-blood immunoassay

We present a deposited microbead plug (DMBP)-based microfluidic chip capable of performing plasma extraction and on-chip immunoassay. The DMBP used as a porous blood filter provides pure blood plasma without the contamination of blood cells or beads. Capillary-driven flow eliminates the requirement of external pumps. The human IgG and goat anti-human IgG sample-to-answer assay was performed in this chip within 600 s using only a 10 μl whole-blood sample. This easy-to-use, rapid, inexpensive, and disposable DMBP-based chip holds a great promise for point-of-care application.     

A simple and cost-effective method for fabrication of integrated electronic-microfluidic devices using a laser-patterned PDMS layer

We report a simple and cost-effective method for fabricating integrated electronic-microfluidic devices with multilayer configurations. A CO₂ laser plotter was employed to directly write patterns on a transferred polydimethylsiloxane (PDMS) layer, which served as both a bonding and a working layer. The integration of electronics in microfluidic devices was achieved by an alignment bonding of top and bottom electrode-patterned substrates fabricated with conventional lithography, sputtering and lift-off techniques. Processes of the developed fabrication method were illustrated. Major issues associated with this method as PDMS surface treatment and characterization, thickness-control of the transferred PDMS layer, and laser parameters optimization were discussed, along with the examination and testing of bonding with two representative materials (glass and silicon). The capability of this method was further demonstrated by fabricating a microfluidic chip with sputter-coated electrodes on the top and bottom substrates. The device functioning as a microparticle focusing and trapping chip was experimentally verified. It is confirmed that the proposed method has many advantages, including simple and fast fabrication process, low cost, easy integration of electronics, strong bonding strength, chemical and biological compatibility, etc.     

Fabrication of a biocompatible flexible electroosmosis micropump

In in-vivo microsystems, one of the components is a biocompatible micropump in order to produce the necessary force to deliver the fluid from the inlet to the outlet. In this contribution, a flexible micropump is fabricated which is aimed to be suitable in drug delivery applications. It provides high degree of biocompatibility, since the only employed materials are implantation grade polydimethylsiloxane elastomer and gold for the electrical interconnects. The working principle of the micropump is based on transverse DC electroosmosis which is a new variant of conventionally applied high voltage DC electroosmosis. This new technique is based on topography irregularities introduced in the channel resulting in a non-uniform charge distribution. The advantage is to drive the micropump using a relatively low DC voltage of 10 V while getting an effective flow speed of 60 μm/s. In order to characterize the flow speed, dyed 3 μm beads are dispersed in the working fluid and their speed is measured by the line scanning technique using a confocal microscope. It is also observed that the flow has a helical profile which is an attractive feature for an efficient micro-mixer in active microfluidics and μ-TAS applications.     

Droplet transportation using a pre-charging method for digital microfluidics

A new droplet-driving scheme for digital microfluidics termed the “pre-charging of a droplet” is demonstrated. In this method, a droplet is initially charged by applying “pre-charging” voltage between the droplet and an electrode buried under dielectric layers. The droplet is then driven to the next electrode by applying “driving” voltage between two adjacent buried electrodes. The concept of pre-charging was proved by the polarity of the charge stored in the droplet. When the droplet is pre-charged with positive voltage, it is driven with negative voltage and vice versa. Therefore, the magnitudes of the pre-charging and driving voltages are identical, but only with the opposite polarity. A 2.5-μL deionized water droplet is pre-charged and driven at a minimal voltage of 12 V. The charge stored in the droplet by this pre-charging method remained for more than 2 min, and the driving actuation could be repeated more than 150 times while the droplet remained its charged state. This method suggests a new means of driving a droplet for digital microfluidics at a relatively low voltage by utilizing both the electrostatic and dielectrophoretic force in the droplet transport process with a simpler structure compared to other single-plate structured devices.     

Millisecond-order rapid micromixing with non-equilibrium electrokinetic phenomena

We report an active micromixer utilizing vortex generation due to non-equilibrium electrokinetics near micro/nanochannel interfaces. Its design is relatively simple, consisting of a U-shaped microchannel and a set of nanochannels. We fabricated the micromixer just using a two-step reactive ion etching process. We observed strong vortex generation in fluorescent microscopy experiments. The mixing performance was evident in a combined pressure-driven and electroosmotic flows, compared with the case with a pure pressure-driven flow. We characterized the micromixer for several conditions: different applied voltages, ion concentrations, flow rates, and nanochannel widths. The experimental results show that the mixing performance is better with a higher applied voltage, a lower ion concentration, and a wider nanochannel width. We quantified the mixing characteristics in terms of mixing time. The lowest mixing time was 2 milliseconds with the voltage of 230 V and potassium chloride solutions of 0.1 mM. We expect that the micromixer is beneficial in several applications requiring rapid mixing.     

Minimal-drift heading measurement using a MEMS gyro for mobile robots: Fused with odometry

To achieve the goal of low-cost MEMS gyros for the precise self-localization of mobile robots, this paper presents a simple, yet effective method to minimize drifts on the heading angle by combining measurements from a gyro with measurements from wheel encoders (odometry). The main idea of the proposed approach is to estimate the accuracy of both sensors as a function of the actual maneuver being carried out, and then the output of both sensors are fused by the complementary filter taking into account the maneuvering conditions. The proposed method is applied to a mobile robot and the experimental data demonstrate the effectiveness of this approach.     

Numerical modeling of multiphase flows in microfluidics and micro process engineering: a review of methods and applications

This article presents a comprehensive review of numerical methods and models for interface resolving simulations of multiphase flows in microfluidics and micro process engineering. The focus of the paper is on continuum methods where it covers the three common approaches in the sharp interface limit, namely the volume-of-fluid method with interface reconstruction, the level set method and the front tracking method, as well as methods with finite interface thickness such as color-function based methods and the phase-field method. Variants of the mesoscopic lattice Boltzmann method for two-fluid flows are also discussed, as well as various hybrid approaches. The mathematical foundation of each method is given and its specific advantages and limitations are highlighted. For continuum methods, the coupling of the interface evolution equation with the single-field Navier–Stokes equations and related issues are discussed. Methods and models for surface tension forces, contact lines, heat and mass transfer and phase change are presented. In the second part of this article applications of the methods in microfluidics and micro process engineering are reviewed, including flow hydrodynamics (separated and segmented flow, bubble and drop formation, breakup and coalescence), heat and mass transfer (with and without chemical reactions), mixing and dispersion, Marangoni flows and surfactants, and boiling.     

Simple and low-cost fabrication of PDMS microfluidic round channels by surface-wetting parameters optimization

Convenient for both biologists and MEMS designers, Polydimethylsiloxane (PDMS) polymer is intensively investigated for its biocompatibility, transparency, high resistance under plasma treatment, flexibility and resistance to high temperature. However, for microfluidic applications, the fabrication of PDMS circular channels is difficult to achieve except by wire moulding. In this article, we present a simple, fast and low-cost fabrication method which can be applied out of clean-room environment. It is based on the deposition of alginic acid sodium salt aqueous solution, enabling the formation of a liquid cylinder on the most hydrophilic part of a hydrophilic/hydrophobic patterned surface. We experimentally studied the interaction between liquid rivulets and surfaces presenting a contrast of wettability and/or a stepwise texture. Subsequent moulding of the half-cylinder of liquid produces round PDMS microfluidic channels. The optimal parameters for hydrophilic/hydrophobic patterns have then been applied to produce the roundest possible channels. The realisation of both straight channels 300–500 μm wide, 1 cm long and 75° tangent chord angle at best, and Y-shaped channels with the same dimensions and 55° TCA is demonstrated.     

2D system approach based output feedback repetitive control for uncertain discrete-time systems

This paper presents a two-dimensional (2D)-based approach to the problem of output feedback repetitive control for uncertain discrete-time systems. It is shown first how the proposed repetitive control scheme can be equivalently formulated in the form of a distinct class of 2D system. Then sufficient conditions for the existence of output feedback control law are derived in terms of linear matrix inequality (LMI), and the control law matrices are characterized by the feasible solutions to this LMI. Moreover, an optimization problem is introduced to efficiently solve the optimal output feedback control law by minimizing the upper bound of a given cost function. Compared with the commonly used 1D-based method, the proposed approach increases the degree of freedom of controller design by not only including in the scheme an output feedback gain but also a feed forward one which can be simultaneously solved using the 2D-based procedures presented in the paper. Finally, a numerical example is provided to demonstrate the effectiveness of the proposed method.     

Parameter identification and design of a robust attitude controller using <Emphasis Type="Italic">H</Emphasis><Subscript>∞</Subscript> methodology for the raptor E620 small-scale helicopter

Rigorous control synthesis for an unmanned aerial vehicle necessitates the availability of a good, reasonable model for such a vehicle. The work reported in this paper focuses on the modeling of a rotary unmanned aerial vehicle (RUAV) and the development of a robust controller that can handle parameter uncertainties and disturbances. The parameters of the plant model are obtained through the use of the prediction error method with real flight data. The response of the identified linear model shows a good match with the measured flight data. The H _∞ control scheme is applied to obtain a robustly stable controller using the identified model. The proposed controller is analyzed using frequency-domain analysis and time-domain simulations. The performance of the proposed H _∞ controller is better than that of the conventional proportional derivative controller in that the proposed controller has a shorter settling time and less overshoot. Furthermore, the degradation of the proposed controller performance is negligible and stability is maintained when the input gains to the plant are doubled, which demonstrates the good performance and robustness of the controller.