三种WPS对不同区块油水动态界面张力研究

采用全量程界面张力测量仪,研究了3种WPS对胜利油田3个采油区块油水体系的油水动态界面张力,从油水界面张力达到最低值所需的时间、稳定值的大小和时间窗口宽度的几个方面,考察了3种WPS对3个采油区块油水动态界面张力的变化情况,为不同采油区块选用WPS提供了依据.并研究了注入水离子强度与界面张力的关系,通过对注入水离子强度的调整,改善其油水界面张力.     

可重构计算在提高数据采集系统容错中的应用

可重构计算技术在数据采集系统中的应用越来越广泛,这不仅得益于可重构计算技术能够更快的对数据进行处理、降低系统能耗,还得益于其可以提高系统的可靠性。该文介绍了如何利用可重构计算技术,提高数据采集系统的容错能力,使数据采集系统在出现硬件故障时能保持正常工作的能力。     

煤气化过程中单颗粒吸收剂脱硫反应模型概述

对煤气化过程中吸收剂脱硫反应的气固反应模型进行了概述.气固反应模型大致可分为未反应缩核模型,晶粒模型、孔模型及逾渗模型等几种基本型式.未反应缩核模型结构比较简单,可以作为其它模型的基础和组成部分,晶粒模型应用较为广泛且已经得到了充分的发展和改进,孔模型侧重于颗粒内部孔隙特性对反应影响的分析,逾渗模型则基于孔模型将逾渗理论引入来描述脱硫反应过程.     

Corrosion behavior and mechanism of the automotive hot-dip galvanized steel with alkaline mud adhesion

The corrosion behavior and mechanism of hot-dip galvanized steel and interstitial-free (IF) substrate with alkaline mud adhesion were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), electrochemical impedance spectroscopy (EIS), and linear polarization. The results show that non-uniform corrosion occurs on the galvanized steel and IF substrate during 250 h with the mud adhesion. The corrosion products on the galvanized steel are very loose and porous, which are mainly ZnO, Zn5(OH...     

Numerical simulation on the rheo-diecasting of the semi-solid A356 aluminum alloy

The effect of injection pressure, piston velocity, and the forming temperature of semisolid slurry on the filling behavior of the semi-solid A356 aluminum alloy was investigated by simulation methods. The simulation results show that these processing parameters have an important effect on the filling behavior of the semi-solid A356 aluminum alloy. The slurry flows steadily in the cavity when the injection pressure, the piston velocity, and the forming temperature are low, but it is prone to turbulent flow w...     

Carburization of ferrochromium metals in chromium ore fines containing coal during voluminal reduction by microwave heating

Chromium ore fines containing coal (COFCC) can be rapidly heated by microwave to conduct the voluminal reduction, which lays a foundation of getting sponge ferrochromium powders with a lower content of C. Under the conditions of COFCC with n(O):n(C) (molar ratio) as 1.00:0.84 and n(SiO₂):n(CaO) as 1.00:0.39, the samples were heated by 10 kW microwave power to reach the given temperatures and held for different times respectively. The results show that the low-C-Cr ferrochromium metal phase in the reduced materials forms before the high-C-Cr ferrochromium metal phase does. With increasing temperature the C content of ferrochromium metals is in a positive correlation with the content of Cr. The C content of ferrochromium metal in reduced materials is 0–10.07% with an average value of 4.68%. With the increase of holding time the Cr content in ferrochromium metals is in a negative correlation with the content of C, while the content of Fe changes in the contrary way. In the microwave field the kinetic conditions of carburization are closely related with the temperature of microwave heating, holding time and carbon fitting ratio. Foundation item: Project(50474083) supported by the National Natural Science Foundation of China; Project supported by the Baoshan Iron & Steel Co. Ltd. of China     

火电机组过热汽温神经网络控制的研究

研究了单神经元PID控制器和BP神经网络PID控制器在火电机组过热汽温的应用．实验结果表明,神经网络PID控制结构简单,有较强的鲁棒性,取得了较好的控制效果．     

传统吉祥纹样在现代平面设计思维中的运用

基于“民族风”在现代平面设计中的兴起,传统纹样在平面设计中的运用已成为现代平面设计中的一种常用思维方法,如提取并运用传统纹样中的吉祥寓意、在传统纹样中加入新文化的元素或在现代平面设计中融入传统文化,由此建立起传统纹样与现代平面设计一种协调共融的联系,从而使现代平面设计与时代、社会文化共同发展．     

基于湍流自旋理论的二维方腔旋转流动的数值模拟

基于湍流自旋理论对旋转方腔内不可压流体的流动进行了二维数值模拟,用有限容积法在交叉网格上对控制方程进行离散,采用SIMPLEC算法进行计算,对流项的离散方面采用了延迟修正的QUICK格式,最后采用二维的TDMA算法进行迭代求解,并对边界条件处理采用了Block块技术.同时与经典理论即Navier-Stokes（N-S）方程的模拟情况做了比较.得出下列结论：N-S方程表明方腔旋转时内部流体只会作刚体旋转;而自旋模型表明该类流动具有不平凡性和不稳定性：即流体的内聚力不足以使流体跟随固体边界作刚体运动,旋转边界必然在流体中诱导出小尺度耗散涡旋,这些小尺度涡旋在固壁附近组织出正负相间的拓扑缺陷（涡旋场强）,这一流体定向奇性会与速度场耦合,并容易形成复杂的大尺度的涡旋运动.     

高压输变电工程的电磁辐射及其环境影响评价

介绍高压输变电工程产生的电磁环境与人类健康关系以及国内外的相关标准,通过监测实例说明已运行的500 kV变电站和线路的电磁辐射均符合相关标准的要求,同时提出了环境影响评价工作的问题和建议.