硬质聚氯乙烯管专用树脂

采用电镜分析、反相色谱、毛细管流变仪和布拉本达塑性仪研究了由锦西化工研究院生产的ＰＶＣ管用树脂的颗粒形貌、比表面积、流变性能和加工速率。结果表明，该树脂和疏松型树脂的形貌呈棉桃状不同，外形为球状，比表面积较大，约比普通ＳＧ－５型树脂增加１倍，最高可达１．００７ｍ＾２／ｇ；在从低剪切到高剪切速率范围内，该树脂的表观粘度均比ＳＧ－５型树脂低，不论是采用粒料还是粉料挤出，在聚合度相同时，该树脂的挤出速率     

化学铣切槽液中Na2S的分析

本文采用“碘量法”测定化铣液中的硫化钠，分析结果的准确度和精密度完全能够满足生产要求。     

Reprint of “Suppressing propylene carbonate decomposition by coating graphite electrode foil with silver”

A method has been developed to suppress the decomposition of propylene carbonate (PC) by coating graphite electrode foil with a layer of silver. Results from electrochemical impedance measurements show that the Ag-coated graphite electrode presents lower charge transfer resistance and faster diffusion of lithium ions in comparison with the virginal one. Cyclic voltammograms and discharge-charge measurements suggest that the decomposition of propylene carbonate and co-intercalation of solvated lithium ions are prevented, and lithium ions can reversibly intercalate into and deintercalate from the Ag-coated graphite electrode. These results indicate that Ag-coating is a good way to improve the electrochemical performance of graphitic carbon in PC-based electrolyte solutions.     

Infrared reflectance and transmission spectra of semiconducting non-stoichiometric CdGe x As2

The infrared reflectance and transmission spectra of amorphous CdGe _x As₂ were investigated to study the amorphous structure with varying Ge content. The mid-infrared optical absorption edges of amorphous CdGe _x As₂ with 0<x<1.2, were observed in the range 1.6–1.7 m, indicating a structural similarity in short-range order throughout. Comparing the reflectance and transmission spectra of amorphous and devitrified crystalline phases established that the structures of amorphous CdGe _x As₂ transformed from the CdAs₂ basic structure to the chalcopyrite (CdGeAs₂) structure, as one progressed fromx=0 tox=1.2. The infrared spectra were interpreted interactively with radial distribution function, magnetic susceptibility, density measurements, and crystallization studies. The crystallization behaviour of amorphous CdGe _x As₂ that was heat treated at different temperatures was investigated using far-infrared transmission spectra.     

Supervised discrete hashing through similarity learning

Multimedia Tools and Applications - Supervised hashing has achieved better accuracy than unsupervised hashing in many practical applications owing to its use of semantic label information. However,...     

Adaptive Safety Motion Control for Underactuated Hovercraft Using Improved Integral Barrier Lyapunov Function

International Journal of Control, Automation and Systems - In this paper, we investigate the problem of safety motion control for an underactuated hovercraft from subject to safety constraint on...     

Design of the low power wake-up receiver for internet of things communication

A wake-up receiver with high energy efficiency and low power consumption is proposed for solving the power consuming problems of wireless nodes communication in the Internet of Things. The proposed wake-up receiver based on the wake-up mechanism can effectively schedule the network nodes communication, and use the simple envelope detection structure to achieve frequency down-conversion, which can flexibly manage energy and reduce power consumption. Based on UMC 65nm CMOS process technology, the wake-up receiver is designed and simulated. The results show that it can achieve S₁₁ of -21dBm and a sensitivity of -75dBm at a data rate of 1Mb/s, when operating at the central frequency of 780MHz and input signal adopting an on-off keying (OOK) modulation, and the power consumption is 82μW at 1.2V voltage supply.     

频率响应法研究噻吩在CeY分子筛上的吸附行为

以NaY、液相Ce离子交换改性的Y型分子筛(L-CeY)为研究对象,运用N2吸附、XRD、NH3-TPD和Py-FTIR等实验方法表征两种Y型分子筛的物化性能。采用频率响应技术(FR)和智能重量分析仪(IGA)研究噻吩在两种分子筛上的吸附行为,并考察噻吩在稀土离子改性Y型分子筛上的不同吸附作用模式。结果表明,频率响应技术能够有效识别分子筛孔道内发生的不同传质过程。噻吩在NaY分子筛上的吸附行为较为简单,存在孔道吸附和π电子相互作用两种吸附过程;而在L-CeY分子筛上吸附行为较为复杂,同时存在孔道吸附和"S-M"吸附等多种吸附过程,另外,在高温条件下,还存在复杂的催化反应过程。     

基于解析解的四阶PDE曲面裁剪方法

该文提出了一种可以广泛应用于四阶PDE曲面的裁剪方法。利用PDE的参数域内的曲线在曲面上投影,得到所求裁剪曲面的边界曲线,然后通过边界曲线的导矢与曲面在边界曲线处的法向量得到边界曲线处的跨界导矢,最后以求得的裁剪曲面的边界曲线以及裁剪曲面在边界曲线处的跨界导矢为PDE曲面的边界条件,用四阶的PDE曲面方程求得PDE裁剪曲面。     

Degradability and biocompatibility of bioglass/poly(amino acid) composites with different surface bioactivity as bone repair materials

Bioglass (BG) possesses excellent bioactivity and has been widely used in the manufacture of biomaterials. In this study, a composite with different surface bioactivity was fabricated via in situ melting polymerization by incorporating BG and poly(amino acid) (PAA) at a suitable ratio. The structure of the composite was characterized by Fourier transform infrared spectroscopy and XRD. The compressive strength of the BG/PAA composites was 139 MPa (BG:PAA = 30:70). The BG/PAA composites were degradable, and higher BG in composite showed higher weight loss after 4 weeks of incubation in simulated body fluid. In addition, the BG/PAA composite maintained adequate residual compressive strength during the degradation period. The SEM results showed the differences in surface bioactivities of the composites directly, and 30BG/PAA composite showed thicker apatite layer and higher Ca/p than 15BG/PAA. in vitro MG-63 cell culture experiments showed that the composite was noncytotoxic and thus allows cells to adhere, proliferate, and differentiate. This indicates that the composite has good biocompatibility. The implantations in the bone defects of rabbits for 4 and 12 weeks were studied. The composites had good biocompatibility and were capable of guiding new bone formation without causing any inflammation. The composite may be successfully used in the development of bone implants.