Evaluation of passive confinement in CFT columns

This paper presents the experimental results of 32 axially loaded concrete-filled steel tubular columns (CFT). The load was introduced only on the concrete core by means of two high strength steel cylinders placed at the column ends to evaluate the passive confinement provided by the steel tube. The columns were filled with structural concretes with compressive strengths of 30, 60, 80 and 100 MPa. The outer diameter (D) of the column was 114.3 mm, and the length/diameter (L/D) ratios considered were 3, 5, 7 and 10. The wall thicknesses of the tubes (t) were 3.35 mm and 6.0 mm, resulting in diameter/thickness (D/t) ratios of 34 and 19, respectively. The force vs. axial strain curves obtained from the tests showed, in general, a good post-peak behavior of the CFT columns, even for those columns filled with high strength concrete. Three analytical models of confinement for short concrete-filled columns found in the literature were used to predict the axial capacity of the columns tested. To apply these models to slender columns, a correction factor was introduced to penalize the calculated results, giving good agreement with the experimental values. Additional results of 63 CFT columns tested by other researchers were also compared to the predictions of the modified analytical models and presented satisfactory results.     

Effect of mutation schemes on convergence to optimum design of steel frames

In this paper an attempt is made to modify a distributed genetic algorithm (DGA) to minimize the weight of steel frames. The main aspects of modifications include the twin analogy and a number of mutation schemes. Although the mutation is a secondary operator in the GA, it plays an influential role in diversifying the population and exploring more feasible design space. In this research, four different mutation schemes are examined and their effects on convergence to optimum solutions are evaluated. Using three benchmark examples, it is demonstrated that mutation operator can efficiently influence on the speed of convergence and consequently saving computation time. As coding a program is required, the DO-DGA software has been developed to handle the algorithm. DO-DGA applies modified DGA, including different mutation schemes, to obtain the global optimum solution.     

Purification,surface modification of coal ash silica and its potential application in rubber composites

This article reports the purification and surface modification of coal ash silica and afterwards its utilization as reinforcing filler in solution‐styrene‐butadiene rubber/butadiene rubber (S‐SBR/BR). The coal ash silica free of unwanted metal ions/mineral oxides was obtained using phosphoric acid. The chemical composition of the purified coal ash silica in comparison to impure coal ash indicates the presence of characteristic hydroxyl functional group at 3440 cm^?1 and an increase in the oxygen content as determined with the help of Fourier Transform Infrared and x‐ray photoelectron spectroscopy, respectively. The contact angle analysis shows that after purification the polar part of the surface energy increased to 17.5 from 12 m Jm^?2. While the surface area increased to an order of magnitude, i.e., 11.6 to 110.5 m² g^?1. The modification of purified silica particles with bis(3‐triethoxysilylpropyl) tetrasulfane reveal the functionalization of hydroxyl to ‐Si‐O‐R groups as detected at 1560 cm^?1. As a consequence, the modified silica based S‐SBR/BR composite resulted in improved mechanical properties due to enhanced silica‐rubber interaction. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Asymmetric cellulose acetate dialysis membranes: Synthesis,characterization, and performance

Cellulose acetate (CA) is highly comparable to other synthetic polymer materials and is effective in the hemodialysis process. In this work, asymmetric CA membranes were synthesized with the phase‐inversion method. CA with a molecular weight of 52,000, poly(ethylene glycol) (PEG) with a molecular weight of 400, and 1‐methyl‐2‐pyrrolidone (NMP) were used as the polymer, additive, and solvent, respectively. The effects of the CA and PEG concentrations and coagulation bath temperature (CBT) on the morphology, pure water permeability (PWP), insulin/human serum albumin (HSA) transmission, and finally thermal and chemical stability of the prepared membranes were determined and investigated. In general, increasing the PEG concentration and CBT and reducing the CA concentration resulted in increased PWP and insulin/HSA transmission. Also, these variations facilitated the formation of macrovoids in the membrane sublayer. On the other hand, increasing the PEG and CA concentrations and reducing CBT resulted in increased thermal and chemical stability of the prepared membranes. Also, ratios of 15.5/10/74.5 and 17.5/10/72.5 (w/w) for the CA/PEG/NMP casting solutions and their immersion into coagulation baths with CBTs of 0 and 25°C, respectively, resulted in the preparation of membranes that had not only optimum sieving properties and higher PWP but also thermal and chemical stability better than that of conventional CA hemodialysis membranes. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Thermal and mechanical properties of polyurethane rigid foam/modified nanosilica composite

Surface modification of fumed nanosilica was performed by using n‐(2‐aminoethyl)‐3‐aminopropyltrimethoxysilane as a coupling agent. Then, modified nanosilica was utilized in the preparation of polyurethane rigid foam. The characterization and the study of properties were done by some techniques, such as Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, dynamic mechanical analysis, and thermomechanical analysis. Also, tensile test was examined to evaluate the static mechanical properties. With the increasing of modified nanosilica, thermal and static mechanical properties were enhanced, but dynamic mechanical behavior was different from static mechanical behavior because of the different properties of interfacial domain and bulk matrix. The presence of functional groups on the nanosilica surface affected stoichiometry and reduced hard phase formation in bulk polymer. The decrease in glass transition temperature (T_g) confirmed this statement. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Optimized experimental design for natural clinoptilolite zeolite ball milling to produce nano powders

Nano powder of natural clinoptilolite zeolite was mechanically prepared by using a planetary ball mill. Statistical experimental design was applied to optimize wet and dry milling of clinoptilolite zeolite. To determine appropriate milling conditions with respect to the final product crystallinity, particle size and distribution, different milling parameters such as dry and wet milling durations, rotational speed, balls to powder ratio and water to powder ratio (for the wet milling) were investigated. Laser beam scattering technique, scanning electron microscopy and X-ray diffraction analyses were carried out to characterize samples. Results showed that larger than 1 mm particle size of clinoptilolite powder may mechanically be reduced into the size range of less than 100 nm to 30 μm by means of planetary ball milling.     

The effect of ethane on the performance of commercial polyphenylene oxide and Cardo-type polyimide hollow fiber membranes in CO<Subscript>2</Subscript>/CH<Subscript>4</Subscript> separation applications

Impurities such as hydrogen sulfide, water vapor and heavy hydrocarbons in natural gas have considerable effects on the membrane performance. Small amounts of condensable and polymer soluble components in the feed gas cause swelling or plasticization of glassy membranes, leading to a reduction in membrane selectivity. In the present research the influence of ethane was investigated on the permeance and selectivity of two commercially available hollow fiber membranes, namely Cardo-type polyimide and PPO hollow fibers for CO₂/CH₄ separations. It was concluded that the gas mixture permeation rate was increased in the presence of C₂H₆. However, the CO₂/CH₄ separation factors remained almost the same in the presence and absence of the C₂H₆.     

The effect of sodium dodecyl sulfate on mean drop size in a horizontal mixer–settler extractor

The effects of surfactant concentration, impeller speed, and holdup on mean drop diameter, D₃₂, during emulsification have been studied in a mixer–settler. Two well‐defined regions for the dependence of D₃₂ on surfactant concentration were observed. At low surfactant concentrations, D₃₂ decreased significantly with an increase in surfactant concentration, whereas D₃₂ did not depend on surfactant concentration at high surfactant concentrations. The decreasing rate of change of D₃₂ with impeller speed and the increasing rate of change of D₃₂ with holdup both decreased when a surfactant was added to the system. Moreover, an empirical correlation has been derived to predict D₃₂.     

Fabrication of Sub‐10 nm Metallic Lines of Low Line‐Width Roughness by Hydrogen Reduction of Patterned Metal–Organic Materials

The fabrication of very narrow metal lines by the lift‐off technique, especially below sub‐10 nm, is challenging due to thinner resist requirements in order to achieve the lithographic resolution. At such small length scales, when the grain size becomes comparable with the line‐width, the built‐in stress in the metal film can cause a break to occur at a grain boundary. Moreover, the line‐width roughness (LWR) from the patterned resist can result in deposited metal lines with a very high LWR, leading to an adverse change in device characteristics. Here a new approach that is not based on the lift‐off technique but rather on low temperature hydrogen reduction of electron‐beam patterned metal naphthenates is demonstrated. This not only enables the fabrication of sub‐10 nm metal lines of good integrity, but also of low LWR, below the limit of 3.2 nm discussed in the International Technology Roadmap for Semiconductors. Using this method, sub‐10 nm nickel wires are obtained by reducing patterned nickel naphthenate lines in a hydrogen‐rich atmosphere at 500 °C for 1 h. The LWR (i.e., 3 σ_LWR) of these nickel nanolines was found to be 2.9 nm. The technique is general and is likely to be suitable for fabrication of nanostructures of most commonly used metals (and their alloys), such as iron, cobalt, nickel, copper, tungsten, molybdenum, and so on, from their respective metal–organic compounds.     

Influence of Ultrasonic Waves on the Processing of Cotton with Cationic Softener

In recent years, the textile industry has been forced to develop new technologies to reduce energy and water consumption. The use of ultrasound in textile wet processing is one solution to this problem. The aim of this work was to investigate the effects of ultrasonic energy on the processing of cotton with a cationic softener. For this purpose, cotton fabric was treated with a fatty acid amide derivative cationic softener in water using ultrasonic energy during treatment. The physical properties of the fabrics treated under different conditions are discussed. The results show that the treatment of fabrics with softeners in an ultrasound bath is more effective compared to conventional methods and that it enhances the physical properties of the cotton.