A low cost and low power silicon npn bipolar process with NMOS transistors (ADRF) for RF and microwave applications

A silicon bipolar process for RF and microwave applications, which features 25-GHz double-polysilicon self-aligned npn bipolar transistors with 5.5-V BV/sub CEO/, optional 0.7-/spl mu/m (L/sub eff/) NMOS transistors with p/sup +/ polysilicon gates for switch applications, lateral pnp transistors, high and low valued resistors, p/sup +/ polysilicon-to-n/sup +/ plug capacitors, and inductors is described. The npn transistors utilize nitride-oxide composite spacers formed using sacrificial TEOS spacers, a process which is simpler than the previously reported composite spacer processes. Use of the composite spacer structure virtually eliminates problems relating to the extrinsic-intrinsic base link-up and reduces plasma induced damage associated with the conventional spacer process. Microwave and RF capabilities of the process up to several GHz are demonstrated by fabricating and characterizing RF amplifiers, low noise amplifiers, and RF switches.<>     

A data request scheduling policy for PCS networks

This paper proposes a scheduling policy called latest preempted, earliest resumed (LPER) for personal communications services (PCS) systems that support voice services as well as the circuit mode data services. The policy gives priority to the voice services over the data services. The scheduling of voice requests is performed as if no data requests exist. Thus, if no idle channel is available when a voice request arrives, a data channel (if exists) is interrupted and the channel will be used for the voice request. The interrupted data request will be resumed when an idle channel is available. In LPER, the data channel selected for interruption is the one that serves the latest outstanding data request (i.e., other outstanding requests enter the system earlier than this request). When an occupied channel is released, LPER resumes the earliest request that entered the system. An analytic model is proposed to study the performance of LPER and provides guidelines to select the input parameters for the PCS systems. This revised version was published online in June 2006 with corrections to the Cover Date.     

Coplanar waveguide-fed uniplanar bow-tie antenna

The design of coplanar waveguide (CPW)-fed bow-tie antenna for the 2.4-GHz ISM band is described. A coplanar waveguide-to-coplanar strips (CPW-to-CPS) balun is used to obtain the balanced feed line for the printed bow-tie. An analysis method based on the mixed potential integral equation method is used to characterize the input characteristics of the bow-tie antenna. The numerical results obtained are in good agreement with the experimental data. Through experiments with bow-tie antennas of various extended angles, the bow-tie antenna with a 90° extended angle exhibits the widest bandwidth in the desired frequency band which has a bandwidth of 17% for a VSWR <1.5:1     

A novel InGaP/GaAs S-shaped negative-differential-resistance (NDR)switch for multiple-valued logic applications

In this paper, a novel InGaP/GaAs multiple S-shaped negative-differential-resistance (NDR) switch based on a heterostructure-emitter bipolar transistor (HEBT) structure is fabricated and demonstrated. An interesting multiple NDR phenomenon resulting from an avalanche multiplication and successive two-stage barrier lowering process is observed under the inverted operation mode. The three-terminal-controlled and temperature-dependent NDR characteristics are also investigated. In addition, a typical transistor performance is found under the normal operation mode. Consequently, owing to the presented different stable operation points and transistor action, the studied device shows a good potential for multiple-valued logic and analog amplification circuit applications     

Adding sense of spatial locality to routing protocols for mobile ad hoc networks

Recently, there has been an increasing interest in mobile ad hoc networks. In a mobile ad hoc network, each mobile node can freely move around and the network is dynamically constructed by collections of mobile nodes without using any existing network infrastructure. Compared to static networks, it faces many problems such as the inefficiency of routing algorithms. Also, the number of control packets in any routing algorithm increases as the mobile speed or the number of mobile nodes increases. Most of the current routing protocols in ad hoc networks broadcast the control packets to the entire network. Therefore, by reducing the number of control packets, the efficiency of the network routing will be improved. If we know where the destination is, we can beam our search toward that direction. However, without using global positioning systems, how can we do this? Define the range nodes as the 1‐hop or 2‐hop neighbors of the destination node. In this paper, we propose using the range nodes to direct our searches for the destination. It can be combined with the existing routing protocols to reduce the control overhead. We show through simulations that AODV and DSR combined with the range node method outperforms the original AODV and DSR routing protocols in terms of control packets overhead. We also show that the delay introduced in find range nodes is insignificant. Copyright © 2006 John Wiley & Sons, Ltd.     

Functionalization of Graphene Oxide Films with Au and MoOx Nanoparticles as Efficient p‐Contact Electrodes for Inverted Planar Perovskite Solar Cells

A graphene oxide (GO) film is functionalized with metal (Au) and metal‐oxide (MoO_x) nanoparticles (NPs) as a hole‐extraction layer for high‐performance inverted planar‐heterojunction perovskite solar cells (PSCs). These NPs can increase the work function of GO, which is confirmed with X‐ray photoelectron spectra, Kelvin probe force microscopy, and ultraviolet photoelectron spectra measurements. The down‐shifts of work functions lead to a decreased level of potential energy and hence increased V_oc of the PSC devices. Although the GO‐AuNP film shows rapid hole extraction and increased V_oc, a J_sc improvement is not observed because of localization of the extracted holes inside the AuNP that leads to rapid charge recombination, which is confirmed with transient photoelectric measurements. The power conversion efficiency (PCE) of the GO‐AuNP device attains 14.6%, which is comparable with that of the GO‐based device (14.4%). In contrast, the rapid hole extraction from perovskite to the GO‐MoO_x layer does not cause trapping of holes and delocalization of holes in the GO film accelerates rapid charge transfer to the indium tin oxide substrate; charge recombination in the perovskite/GO‐MoO_x interface is hence significantly retarded. The GO‐MoO_x device consequently shows significantly enhanced V_oc and J_sc, for which its device performance attains PCE of 16.7% with great reproducibility and enduring stability.     

A novel authenticated group key agreement protocol for mobile environment

An authenticated group key agreement protocol allows a group of parties to authenticate each other and then determine a group key via an insecure network environment. In 2009, Lee et al. first adopted bilinear pairings to propose a new nonauthenticated group key agreement protocol and then extend it to an authenticated group key agreement protocol. This paper points out that the authenticated protocol of Lee et al. is vulnerable to an impersonation attack such that any adversary can masquerade as a legal node to determine a group key with the other legal nodes and the powerful node. This paper shall employ the short signature scheme of Zhang et al. to propose a new authenticated group key agreement protocol. The short signature scheme of Zhang et al. is proven to be secure against the adaptive chosen-message attacks in the random oracle model, so the proposed protocol can withstand the possible attacks. Besides, compared with the authenticated protocol of Lee et al., the proposed protocol is more secure and efficient.     

BER performance of a uniform circular array versus a uniform linear array in a mobile radio environment

In this letter, we present a comparison between the bit error rate (BER) performance of a uniform circular array (UCA) and a uniform linear array (ULA) assuming quadrature phase-shift keying (QPSK) and maximal-ratio-combining (MRC) in a mobile radio communication environment. The results are based on analysis, assuming a flat Rayleigh fading channel with omni-directional antennnas and considering the azimuthal plane only. The analytical BER is derived as a function of the spatial fading correlation for both types of antenna arrays. Results show that for similar aperture sizes the UCA outperforms the ULA when considering all angles-of-arrival. However, there is considerable variability over central angle-of-arrival (AOA) for low-to-moderate angle spreads. For angles-of-arrival concentrated near the broadside of the linear array, the ULA typically performs as well as or better than the UCA. A truncated Gaussian AOA (AOA) distribution is assumed to model spatial correlation and the numerical results focus on four element arrays.     

Feasibility of adding a personal communications network to anexisting fixed-service microwave system

This paper examines the feasibility of adding a personal communication network (PCN) to a frequency band which is already allocated to fixed-service microwave systems. To achieve this goal, spread spectrum techniques are used to spread narrowband PCN signals into wideband. The forward and reverse link performance of PCN users under the influence of the microwave system and the influence of PCN users on the microwave system are both examined. It is proven that spectrum sharing between the PCN network and microwave systems is indeed feasible. Although our analysis is done based upon the consideration of only one microwave system, it can be easily extended to allow the appearance of two or more microwave systems     

COD: alternative architectures for high speed packet switching

Architectures for packet switches are approaching the limit of electronic switching speed. This raises the question of how best to utilize advances in photonic technology to enable higher speeds. The authors introduce cascaded optical delay line (COD) architectures. The COD architectures utilize an extremely simple distributed electronic control algorithm to configure the states of 2×2 photonic switches and use optical fiber delay lines to temporarily buffer packets if necessary. The simplicity of the architectures may also make them suitable for “lightweight” all-electronic implementations. For optical implementations, the number of 2×2 photonic switches used is a significant factor determining cost. The authors present a “baseline” architecture for a 2×2 buffered packet switch that is work conserving and has the first-in, first-out (FIFO) property. If the arrival processes are independent and without memory, the maximum utilization factor is ρ, and the maximum acceptable packet loss probability is ϵ, then the required number of 2×2 photonic switches is O(log(ϵ)/log(γ)), where γ=ρ²/(ρ²+4-4ρ). If one modifies the baseline architecture by changing the delay line lengths then the system is no longer work conserving and loses the FIFO property, but the required number of 2×2 photonic switches is reduced to O(log[log(ϵ)/log(γ)]). The required number of 2×2 photonic switches is essentially insensitive to the distribution of packet arrivals, but long delay lines are required for bursty traffic