Mechanical properties of iron processed by severe plastic deformation

In the present study, the mechanical properties of Fe processed via severe plastic deformation (equal-channel angular pressing (ECAP)) at room temperature were investigated for the first time. The grain size of annealed Fe, with an initial grain size of about 200 μm, was reduced drastically during ECAP. After eight passes, the grain size reaches 200 to 400 nm, as documented by means of transmission electron microscopy (TEM). The value of microhardness during pressing increases 3 times over that of the starting material after the first pass and increases slightly during subsequent pressing for higher-purity Fe. Examination of the value of microhardness after eight passes as a function of post-ECAP annealing temperature shows a transition from recovery to recrystallization, an observation that resembles the behavior reported for heavily deformed metals and alloys. The tensile and compression behaviors were examined. In tension, a drop in the engineering stress-engineering strain curve beyond maximum load was observed both in the annealed Fe and the ECAP Fe. This drop is related to the neck deformation. The fracture surface, examined by scanning electron microscopy (SEM), shows vein patterns, which is different from the dimples found on the fracture surface of annealed Fe. In compression, an initial strain-hardening region followed by a no-strain-hardening region was observed in the ECAP Fe. The yield strength in tension of the ECAP Fe was observed to be higher than that in compression. The strengthening mechanisms and softening behavior are discussed.     

长庆油田苏平1井固井技术研究与应用

苏平l井完井方式运用了技术套管一次上返、悬挂尾管和筛管技术。该井技术套管段井眼大、裸眼段长，加上大斜度、小间隙的尾管段．对水泥浆体系的性能要求较高。总结分析了长庆天然气水平井苏平l井的固井技术问题，介绍了苏平l井的井身结构与地层性质。通过研究．确定采用低失水GSJ水泥浆体系。该体系成功地应用在三次工程建井过程中，解决了长裸眼、大灰量、大斜度、尾管小间隙等固井技术问题。固井质量达到工程要求。     

Two-channel constrained least squares problems: solutions using power methods and connections with canonical coordinates

The problem of two-channel constrained least squares (CLS) filtering under various sets of constraints is considered, and a general set of solutions is derived. For each set of constraints, the solution is determined by a coupled (asymmetric) generalized eigenvalue problem. This eigenvalue problem establishes a connection between two-channel CLS filtering and transform methods for resolving channel measurements into canonical or half-canonical coordinates. Based on this connection, a unified framework for reduced-rank Wiener filtering is presented. Then, various representations of reduced-rank Wiener filters in canonical and half-canonical coordinates are introduced. An alternating power method is proposed to recursively compute the canonical coordinate and half-canonical coordinate mappings. A deflation process is introduced to extract the mappings associated with the dominant coordinates. The correctness of the alternating power method is demonstrated on a synthesized data set, and conclusions are drawn.     

Roles of minor additions in formation and properties of bulk metallic glasses

Bulk metallic glasses (BMGs) are of current interest worldwide in materials science and engineering because of their unique properties. Exploring BMGs materials becomes one of the hottest topics in the materials science field. To date, there is very active worldwide development of new BMGs, and extensive efforts have been carried out to understand and improve the glass-forming ability of metallic materials supported by large government and industry programs in North America, Asia, and Europe. Minor addition or microalloying technique, which has been widely used in other metallurgical fields, plays effective and important roles in formation, crystallization, thermal stability and property improvement of BMGs. This simple approach provides a powerful tool for the BMG-forming alloys development and design. In this paper, we present a comprehensive review of the history and the recent developments of this technique in the field of BMGs. The roles of the minor addition in the formation and the properties of the BMGs and the BMG-based composites will be discussed and summarized within the framework of thermodynamics, kinetics and microstructure. The empirical criteria, or the principles and guidelines for the applications of the technique in BMG field are outlined.     

一种全局优化的多面体凸分解匹配方法

提出了一种全局优化的多面体匹配方法，该方法对物体的拓扑关系和结构关系进行多级匹配,利用全局优化的松驰迭代方法减少匹配误差，并由匹配的一致性准则进行匹配结果的检测，根据物体的内在特征来进行匹配，从而解决非同构物体的匹配.可广泛应用于物体识别、三维物体重建、医学图象处理等领域，实验证明此方法质量好、自动化程度高，是一种有效的全局优化结构匹配方法．     

煤粉粒度对高炉风口前燃烧性能的影响

安钢炼铁厂在喷吹瘦煤后，将小于0．074mm的比例由70％放宽到30％，使磨煤能力提高了21％。采用自行设计的风口取样器，研究了风口前气体成分和煤粉燃烧率的变化。当煤粉粒度变粗后，风口前循环区变长，放宽煤粉粒度与高富氧、高风温配合，能使高炉得到较好的经济效益。     

汽轮机轴承烧瓦与轴颈的渗巴氏合金现象

简述轴承工作性质，巴氏合金应用与相组成的基本情况。论述汽轮机转子在两个电厂长期运行后，由于轴颈发生的不正常摩擦损伤，在大修改造中由无损检查、机械加工揭示出轴颈存在严重的渗巴氏合金现象，低熔点金属Sn、Sb与Cu向转子材料晶界的深层渗入最终导致了3根大型在投转子的严重开裂与报废。图11表2     

基于B/S和C/S的高中校园一卡通系统

结合广东潮州高级中学的实际情况,介绍了高中校园一卡通系统的设计和应用.     

PRO——一种新的地震资料处理方法

PRO(影像的参数展开)技术是由俄罗斯地球物理学家开发的一种崭新的地震资料处理技术。本文从PRO基本原理入手,简单介绍了PRO的速度分析原理。PRO速度分析和成像均以信号的椭圆展开和参数展开为基础,其中参数展开方法考虑波型转换、介质的横向不均匀造成传播速度的变化。该技术抛开了传统共中心点叠加的思想,从根本上解决了以CMP方法为基础的传统地震处理技术遇到的困难。通过模型与实例分析对比,PRO比传统CMP方法更优越。     

视觉诱发脑电波的时变最优滤波估计

本文提出了一个自修正的非平稳信号模型,并设计了时变最优滤波器于视觉诱发脑电波 的估计.估计出的信号与原始信号的各波峰潜伏期严格保持一致,而波峰幅值略有衰减.给 出的仿真与实体试验结果都证明了本方法的有效性.