田关水厂设计方案的特点

湖北省田关水利工程管理处自来水厂（简称田关水厂），位于潜江市城区西郊，坐落在东荆河与田关河交汇处，是湖北省潜江市的最大乡镇水厂．现日供水规模为1．5t。田关水厂按“一次性规划，分三期实施”的原则进行设计，现已完成二期工程建设。田关水厂多年良好运行经验表明．从供水服务区需求出发．设计出适合经济社会发展和与当地资源环境条件相协调的水厂，是水厂长期高效运营的关键。     

Silicon power MOSFET at low temperatures: A two-dimensional computer simulation study

Understanding how the structure of the unit-cell affects the cryogenic performance of a Si power Metal Oxide Semiconductor Field Effect Transistor (MOSFET) is an important step toward optimizing of the device for cryogenic operations. In this paper, numerical simulations of the Si power Double Diffused MOSFET’ (DMOS) are performed at room temperature and cryogenic temperatures. Physically based models for temperature dependent silicon properties are employed in the simulations. The performances of power DMOS’ with various unit-cell structures are compared at both room temperature and low temperatures. The effect of the cell structure on the on-resistance and breakdown voltage of the device are analyzed. The simulation results suggest that the device optimized for room temperature operation can be further optimized at cryogenic temperatures.     

东濮凹陷低阻油层成因研究

针对东濮凹陷低阻油层的测井曲线显示特征，从岩石物理特性、油藏高度、泥质砂岩阳离子交换、换井滤液侵入和导电矿物影响等几个方面系统地进行了低阻油层成因研究。研究结果表明，东濮凹陷伏阻油层的形成是多种因素共同作用的结果，但骨架颗粒岩性细、泥质含量偏重、地层水矿化度高，油藏高度低是形成东濮凹陷低阻油层的主要因素。     

基于DSP的图像灰度校正

本文介绍了一个在用户视频环境下，采用典型非线性因子2.2进行非线性校正的公式；进而给出采用TMS320C2000进行图像灰度校正的软件设计方法。     

一种新型冰箱测试系统设计与应用

介绍了一种用于冰箱检测的新型测试系统，并在WIN98环境下用VB6．0实现该系统软件。该系统可以同时对四台冰箱的温度参数及其中一台冰箱的耗电量进行检测，该系统具有成本低，性能稳定的优点。     

单模光纤的传输衰减随温度变化的研究

本文从实验上测量了单模石英光纤在－50～120℃范围内的损耗。随着温度升高，光纤的损耗随之降低，在常温附近达到最小。其后损耗随着温度的继续升高而增加。损耗的变化主要是由于杂质的吸收和微弯损耗。本文对杂质的吸收以及微弯损耗进行了数值模拟，并且从理论上定性地解释了损耗对温度的依赖关系。     

太阳能热风发电技术研究进展

介绍了太阳能热风发电的产生背景、技术原理和特点。太阳能热风发电能够实现由太阳能到空气动能,最终到电能的转变,具有环保无污染、运行维护简单、缓解常规能源消耗等特点。简要介绍世界上第1座试验性质的太阳能热风发电站。对太阳能热风发电技术相关研究历程从试验研究和理论研究2个方面做了综述,重点介绍了澳大利亚电站的建设进展及最新相关学术研究进展,包括过渡段理论及试验研究、系统数值模拟和太阳能热风发电技术在高山地区的应用等。介绍我国太阳能资源情况,指出我国太阳能资源丰富,适合建造大型太阳能热风发电站。     

浅谈造价工程师的执业能力

我国的工程造价管理体系正在逐步规范，并建立以市场形成价格为主的价格体制；改革现行工程定额管理方式，这些对造价工程师的执业能力和水平提出了更高的要求。造价工程师面临机遇、挑战，必须不断调整知识结构，提高整体素质，拓展个人在专业领域的空间。     

盛钢桶铝锆碳滑板的研究与生产

通过研究,在盛钢桶用铝锆碳滑板的生产过程中,调整了ZrO2的加入量,添加了复合抗氧化剂,使滑板具用较高的强度和抗氧化性能,提高了滑板的使用寿命.     

Development of Bi(Pb)-2223/Ag pancake-shaped and solenoidal coils

High temperature superconducting (HTSC) multifilamentary (MT) Bi(Pb)-2223/Ag tapes with reproducible critical current density of between 15000 and 20000 A/cm² at 77 K in self field have been achieved using the standard flat-rolling method as the intermediate deformation between sintering periods. Long lengths of Bi(Pb)-2223/Ag MT tapes up to 43 m prepared by the conventional method of powder-in-tube (PIT) have been successfully produced on a laboratory scale. Several coils have been fabricated from sections of the long length tape, using the co-wound wind-and-react (W&R) procedure for the pancake-shaped and the singly-wound W&R as well as R&W procedure for the solenoidal coils. A novel W&R solenoidal coil (reaching ~973 ampere-turns) wound on an alumina ceramic tube generates a DC field of ~19 mT at 77 K and has been fabricated together with five pancake-shaped coils, each generating an average of ~5 mT at 77 K. These are destined for magnet construction with a possible combined calculated field of ~0.04 T at 77 K (with liquid nitrogen as a coolant)