Effect of particle size on the surface oxidation and flotation behavior of galena particles in lime system

ABSTRACT

In this research, the effect of particle size on the surface oxidation and flotation behavior of galena in the lime system was studied. Coarse (?0.074 + 0.038 mm), intermediate (?0.038 + 0.025 mm) and fine (?0.025 mm) galena particles were used in the experiment. The dissolution tests, flotation tests, and sorption tests were accomplished. Through further analysis by XPS, the effect of particle size and lime was observed. The decrease of mineral particle sizes increased the adsorption ratio of collector and the dissolution of galena, while the hydrophilic product OH^?/Ca(OH)⁺ produced by dissolution occupied the dominant position, which led to the minerals hydrophilic.     

Studies on membrane formation mechanism by the light transmission technique. I

New parameters, light transmission rate and minimum light transmissions, are proposed. These two parameters reflect the characteristics of the membrane‐forming system and the formation process of the membranes by phase inversion. The relationship between the light transmission and the porous structure of the membrane can be explained by the geometrical optics principles. Variation of the two parameters combining Reuvers's phase separation theory provided a convenient analytical method to predict effectively membrane morphologies. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 174–181, 2003     

环氧稀释剂十二烷基缩水甘油醚的合成

对稀释剂十二烷基缩水甘油醚的合成及影响产品质量的因素进行了研究,并以十二、十四混醇为原料进行了对比试验。     

X-Ray, Micro-Raman, Optical Absorption/Emission Studies of ErNbO4 Grown by Vapor Transport Equilibration

Vapor transport equilibration (VTE) treatments were performed on a Y-cut bulk Er (1.6 mol%)-doped congruent LiNbO₃ crystal and an X-cut pure congruent crystal, on one surface of which a 40 nm-thick film of erbium metal was coated before the VTE treatment. Scanning electron microscope, powder or single-crystal X-ray diffraction (XRD), polarized infrared absorption/emission of Er³⁺ as well as micro-Raman spectroscopy were used to study the two VTE crystals. The results are discussed in comparison with a corresponding as-grown bulk Er-doped crystal, calcined ErNbO₄ powder, and a locally Er-doped congruent LiNbO₃ crystal prepared by using the standard Er-diffusion technique. The experimental results show that the VTE treatment induces the formation of micrometer-sized ErNbO₄ precipitates with the crystallographic morphology of a flat polyhedron not only on the surfaces of both crystals but also in the bulk of the homogeneously Er-doped one. The optical absorption and emission studies show that the formation of the precipitates results in substantial spectral changes in both the 0.98 and 1.5 μm regions. The micro-Raman studies allow to resolve four additional Raman peaks around 800 cm⁻¹ in the E(TO) spectra of the two VTE crystals. These additional Raman peaks are associated with the characteristic vibrations with respect to the NbO₄³⁻ group. Characteristic XRD, optical absorption, and emission and Raman peaks for identifying the ErNbO₄ phase are proposed. Finally, the formation mechanism and light-scattering effect of the precipitates are discussed.     

Morphologies-Controlled Synthesis and Optical Properties of Bismuth Tungstate Nanocrystals by a Low-Temperature Molten Salt Method

Well-crystallized bismuth tungstate (Bi₂WO₆) powders with different morphologies were successfully synthesized via a low-temperature molten salt method. The powders were characterized by X-ray diffraction, transmission electron microscopy, and UV-Vis, respectively. It was found that the variation of morphology of the obtained Bi₂WO₆ powder mainly depends on the different reaction temperatures and the weight ratio of LiNO₃–NaNO₃ salt to precursor. In addition, the UV-Visible absorption spectra showed that the synthesized powders had strong light absorption properties not only in the ultraviolet light but also in the visible light region.     

降低循环流化床锅炉飞灰含碳量的因素分析

循环流化床锅炉的飞灰含碳量是锅炉燃烧工况好坏的直接反映 ,其对锅炉的热效率的影响是很大的 ,它还直接影响着粉煤灰的综合开发和利用 .在对云天化循环流化床锅炉的生产实验研究中 ,分析了影响循环流化床锅炉飞灰含碳量的各种因素 (床温、煤质煤粒、一次风、二次风、床压和旋风分离器效率等 ) ,通过实验研究找到了降低循环流化床锅炉飞灰含碳量的具体而又行之有效的操作方法 ,以指导实际生产 .     

含锆介孔材料的研究进展

介绍了目前国内外对介孔氧化锆和含锆介孔二氧化硅材料的研究状况,包括合成介孔氧化锆的2种主要体系水热体系和非水体系,以及在介孔二氧化硅中引入锆的主要方法直接合成法和溶液浸渍法,这2类材料在化学、光学、电子学、电磁学、材料学、环境学等诸多领域具有巨大的潜在应用价值.     

环氧SBS开环制备顺酐化离聚体及其物化性能的研究

利用环氧化苯乙烯-丁二烯-苯乙烯嵌段共聚物（ESBS）的环氧基与顺丁烯二酸氢钾（HKM）在相转移催化剂和开环催化剂存在的条件下开环反应制得钾离聚体。研究了其反应条件，由于添加了助剂BM，环氧基开环率达到了95．2％，并用FTIR确定了离聚体的生成；通过对不同环氧值ESBS开环反应，研究了不同离子基团质量摩尔浓度对离聚体物化性能的影响。     

GCr15轴承钢连铸过程中热物性参数的研究

借鉴前人实验数据,采用一定的数学方法,对轴承钢的热物性参数进行了研究.结果表明：GCr15轴承钢的液相线温度为1 465.7℃,固相线温度为1 328.4℃,零强度温度为1 380℃左右,零塑性温度为1 330℃左右;在固相区、液固两相区、液相区分别采用不同的公式进行处理,可使结果更加准确,还避免了奇异性.研究结果可为轴承钢连铸工艺有限元模拟提供基础.     

韧性断裂准则在板料成形中应用研究进展

对板料成形中的成形极限应力图、最大变薄率、成形极限图以及韧性断裂准则等预测成形极限的方法进行了综述和分析,提出了利用韧性断裂准则能够较好地预测塑性差的板料成形极限,而且还能考虑应变路径的变化.利用有限元方法模拟时,韧性断裂准则既可以运用到完全耦合的弹塑性损伤模型的增量方法中,也可以运用到一步有限元逆算法中.指出了为准确地预测成形极限,除了提高有限元模拟精度外,应找到一种本质地反映材料性能的准则.