Mobile touchscreen user interfaces: bridging the gap between motor-impaired and able-bodied users

Touchscreen mobile devices are highly customizable, allowing designers to create inclusive user interfaces that are accessible to a broader audience. However, the knowledge to provide this new generation of user interfaces is yet to be uncovered. The goal was to thoroughly study mobile touchscreen interfaces and provide guidelines for informed design. The paper presents an evaluation performed with 15 tetraplegic and 18 able-bodied users that allowed to identify their main similarities and differences within a set of interaction techniques (Tapping, Crossing, and Directional Gesturing) and parameterizations. Results show that Tapping and Crossing are the most similar and easy to use techniques for both motor-impaired and able-bodied users. Regarding Tapping, error rates start to converge at 12 mm, showing to be a good compromise for target size. As for Crossing, it offered a similar level of accuracy; however, larger targets (17 mm) are significantly easier to cross for motor-impaired users. Directional Gesturing was the least inclusive technique. Regarding position, edges showed to be troublesome. For instance, they have shown to increase Tapping precision for disabled users, while decreasing able-bodied users’ accuracy when targets are too small (7 mm). It is argued that despite the expected error rate disparity, there are clear resemblances between user groups, thus enabling the development of inclusive touch interfaces. Tapping, a traditional interaction technique, was among the most effective for both target populations, along with Crossing. The main difference concerns Directional Gesturing that in spite of its unconstrained nature shows to be inaccurate for motor-impaired users.     

Tokens vs. Signals: On Conformance between Formal Models of Dataflow and Hardware

Designing hardware often involves several types of modeling and analysis, e.g., in order to check system correctness, to derive performance properties such as throughput, to optimize resource usages (e.g., buffer sizes), and to synthesize parts of a circuit (e.g., control logic). Working directly with low-level hardware models such as finite-state machines (FSMs) to answer such questions is often infeasible, e.g., due to state explosion. Instead, designers often use dataflow models such as SDF and CSDF, which are more abstract than FSMs, and less expensive to use since they come with more efficient analysis algorithms. However, dataflow models are only abstractions of the real hardware, and often omit critical information. This raises the question, when can one say that a certain dataflow model faithfully captures a given piece of hardware? The question is of more than simply academic interest. Indeed, as illustrated in this paper, dataflow-based analysis outcomes may sometimes be defensive (e.g., buffers that are too big) or even incorrect (e.g., buffers that are too small). To answer the question of faithfully capturing hardware using dataflow models, we develop a formal conformance relation between the heterogeneous formalisms of (1) finite-state machines with synchronous semantics, typically used to model synchronous hardware, and (2) asynchronous processes communicating via queues, used as a formal model for dataflow. The conformance relation preserves performance properties such as worst-case throughput and latency.     

Alterations in gap junction connexin43/connexin45 ratio mediate a transition from quiescence to excitation in a mathematical model of the myometrium

The smooth muscle cells of the uterus contract in unison during delivery. These cells achieve coordinated activity via electrical connections called gap junctions which consist of aggregated connexin proteins such as connexin43 and connexin45. The density of gap junctions governs the excitability of the myometrium (among other factors). An increase in gap junction density occurs immediately prior to parturition. We extend a mathematical model of the myometrium by incorporating the voltage-dependence of gap junctions that has been demonstrated in the experimental literature. Two functional subtypes exist, corresponding to systems with predominantly connexin43 and predominantly connexin45, respectively. Our simulation results indicate that the gap junction protein connexin45 acts as a negative modulator of uterine excitability, and hence, activity. A network with a higher proportion of connexin45 relative to connexin43 is unable to excite every cell. Connexin45 has much more rapid gating kinetics than connexin43 which we show limits the maximum duration of a local burst of activity. We propose that this effect regulates the degree of synchronous excitation attained during a contraction. Our results support the hypothesis that as labour approaches, connexin45 is downregulated to allow action potentials to spread more readily through the myometrium.     

Dielectric function of palladium capped zirconium thin films as a function of absorbed hydrogen

We report measurements of the optical transmission, between 240 and 1040 nm, and electrical resistivity of polycrystalline zirconium thin films as they absorb hydrogen. Both are measured as H₂ pressure is increased up to 880 mbar, at room temperature. Films, 20–22 nm thick, are deposited on fused quartz substrates by e-beam evaporation at 5.3 × 10^?7 mbar base pressure and covered with a 8.0 nm Pd over-coat. The morphology of the films is studied by means of AFM images. The complex refractive indices of Zr and Pd are extracted numerically from the transmission spectra by using a spectral projected gradient method for different hydrogen pressures. The corresponding dielectric functions for various Zr hydrogen concentrations are described with the parametric Drude-Lorentz and Brendel-Bormann (DL & BB) models. The Acceptance-Probability-Controlled Simulated Annealing approach is applied to calculate the parameters of the DL & BB model. This allows us to describe the effect of increasing hydrogen absorption on these parameters and in derived quantities, like the relaxation time and the effective mass of conduction electrons, the electrical resistance, the Fermi energy, and the electronic density of states at the Fermi level.     

Check Your Biosignals Here: A new dataset for off-the-person ECG biometrics

The Check Your Biosignals Here initiative (CYBHi) was developed as a way of creating a dataset and consistently repeatable acquisition framework, to further extend research in electrocardiographic (ECG) biometrics. In particular, our work targets the novel trend towards off-the-person data acquisition, which opens a broad new set of challenges and opportunities both for research and industry. While datasets with ECG signals collected using medical grade equipment at the chest can be easily found, for off-the-person ECG data the solution is generally for each team to collect their own corpus at considerable expense of resources. In this paper we describe the context, experimental considerations, methods, and preliminary findings of two public datasets created by our team, one for short-term and another for long-term assessment, with ECG data collected at the hand palms and fingers.     

A review of the statistical turbulence theory required extending the population balance closure models to the entire spectrum of turbulence

The models for fluid particle breakage and coalescence due to turbulence are generally limited to the inertial subrange of isotropic turbulence and infinite Reynolds numbers. A rigorous procedure for extending the fluid particle breakage and coalescence closures to the entire spectrum of isotropic turbulence and for a wider range of Reynolds numbers can be established based on statistical turbulence theory. The modeling procedure consists of a three‐dimensional (3‐D) literature model energy spectrum for the dissipation, inertial, and energy containing subranges of isotropic turbulence, and an exact literature integral relation for determining the second‐order longitudinal structure function from the 3‐D energy spectrum. A review of the requisite statistical turbulence theory and the use of the model energy spectrum is provided, because the necessary details are not easily accessible in the chemical engineering literature and misconceptions are found in the publications of the previous modeling attempts. © 2016 American Institute of Chemical Engineers AIChE J, 62: 1795–1820, 2016     

Coupled shear‐flexural model for dynamic analysis of fixed‐base tall buildings with tuned mass dampers

An equivalent discrete model is developed for time domain dynamic analysis of uniform high‐rise shear wall‐frame buildings with fixed base and carrying any number of tuned mass dampers (TMDs). The equivalent model consists of a flexural cantilever beam and a shear cantilever beam connected in parallel by a finite number of axially rigid members that allow the consideration of intermediate modes of lateral deformation. The proposed model was validated by a building whose lateral resisting system consists of a combination of shear walls and braced frames. The results showed the effectiveness of TMDs to reduce the peak displacements, interstory drift ratio, and accelerations when the building is subjected to a seismic load. The root mean square accelerations due to along‐wind loads also decrease if TMDs are attached to the building.     

Heavy Metals in Stream Sediments from the Coquimbo region (Chile): Effects of Sustained Mining and Natural Processes in a Semi-arid Andean Basin

Abstract.   Active sediments from the Elqui River in Chile were sampled 4 times at 10 sites during 2000. Concentrations of Ag, Ba, Cd, Co, Cr, Hg, Mn, Mo, Ni, Pb, Sr, Ti, V, Al, Ca, Fe, K, Mg, Na, P, and S were normal. Zinc levels were clearly high, and those of Cu (hundred to thousands ppm) and As (tens to hundreds ppm) were highly anomalous. Dissolved Cu (0.1-12.7 ppm) and Zn (0.2-2.2 ppm) levels were also very high. The anomalies of the upper tributaries are due to the El Indio–Tambo Au-Cu-As district and large hydrothermal alteration zones at altitudes between 3500–4500 m. Lower on the river, old and active tailing waste deposits and on-going mining operations in the Talcuna Cu (Pb) district are responsible. Partially eroded tailing deposits in the alluvial plain of the Elqui River and its tributaries, and especially in the El Indio-Tambo district, after mine closure in 2000, warrant special attention.