All-trans beta-carotene is absorbed preferentially to 9-cis beta-carotene, but the latter accumulates in the tissues of domestic ferrets (Mustela putorius puro)

The algae Dunaliella bardawil and Dunaliella salina naturally contain large concentrations of all-trans and 9-cis beta-carotene (betaC). The purpose of this study was to compare the relative serum and tissue accumulation of all-trans and 9-cis betaC in ferrets fed different ratios of all-trans/9-cis betaC derived from two commercial sources, D. bardawil or D. salina (Betatene). Male ferrets (7 wk old) were fed carotene-free, pelleted diets for 27 d. Beginning on d 18, groups of ferrets (n = 6 or 7) received daily, one of six oral supplements varying in ratios of 9-cis and all-trans betaC mixed with approximately 1.0mL of Ensure. Four supplements containing 5.2-8.3 micromol total betaC were prepared from a 20% Betatene preparation, D. bardawil, a high-cis Betatene preparation, and Betatene further enriched in 9-cis betaC with all-trans betaC/9-cis betaC ratios of 2.2, 1.5, 0.6 and 0.4, respectively. Two control supplements, high and low betaC, were prepared from commercial betaC beadlets. The high control supplement had an all-trans/9-cis ratio of 19.0, whereas 9-cis betaC was not detected in the low supplement. On d 27, serum and tissues were obtained for HPLC analysis of betaC and its isomers. Analysis of livers showed that all-trans betaC was the primary isomer present, but 9-cis and other isomers were also detected in all groups. The hepatic all-trans/9-cis ratios were 5.9, 4.9, 2.5, 1.4, 52.2 and47.5, respectively, for the groups listed above. Lower amounts of all-trans and 9-cis betaC were found in kidneys compared with the liver, but ratios of all-trans/9-cis were not different among groups. Only trace amounts of 9-cis betaC were found in serum. These results demonstrate that the algae D. bardawil and D. salina provide a bioavailable source of betaC isomers, but, as in humans, absorption of 9-cis betaC is poor and any 9-cis betaC absorbed is apparently cleared by the liver.     

Adaptive synthesis of distance fields

We address the computational resource requirements of 3D example-based synthesis with an adaptive synthesis technique that uses a tree-based synthesis map. A signed-distance field (SDF) is determined for the 3D exemplars, and then new models can be synthesized as SDFs by neighborhood matching. Unlike voxel synthesis approach, our input is posed in the real domain to preserve maximum detail. In comparison to straightforward extensions to the existing volume texture synthesis approach, we made several improvements in terms of memory requirements, computation times, and synthesis quality. The inherent parallelism in this method makes it suitable for a multicore CPU. Results show that computation times and memory requirements are very much reduced, and large synthesized scenes exhibit fine details which mimic the exemplars.     

Parallel 2-d convolution on a mesh connected array processor

In this correspondence, a parallel 2-D convolution scheme is presented. The processing structure is a mesh connected array processor consisting of the same number of simple processing elements as the number of pixels in the image. For most windows considered, the number of computation steps required is the same as that of the coefficients of a convolution window. The proposed scheme can be easily extended to convolution windows of arbitrary size and shape. The basic idea of the proposed scheme is to apply the 1-D systolic concept to 2-D convolution on a mesh structure. The computation is carried out along a path called a convolution path in a systolic manner. The efficiency of the scheme is analyzed for windows of various shapes. The ideal convolution path is a Hamiltonian path ending at the center of the window, the length of which is equal to the number of window coefficients. The simple architecture and control strategy make the proposed scheme suitable for VLSI implementation.     

The assessment of thermal history in pressure vessel steel

A component of the present work involves attempts to simulate the microstructures of 1Cr-0.5Mo steel sample removed from service after extended exposure to elevated temperatures (10⁵ h at 535°C). The aim is to establish a basis for assessing the thermal history of service components and service weldments. Previous work has established that it is not possible to adequately simulate service microstructures using accelerated isothermal heat treatments alone. A selective mechanical testing program at elevated temperature has thus been investigated to superimpose the effect of stress on heat treatment. Qualitative comparison within each of these sets of micrographs suggests that the intraferritic precipitation in the creep samples is in each case refined and of a higher density compared to the sample subjected to isothermal heat treatments. It has been suggested that a comparison of the composition of the pearlitic M₃C in creep test samples with the empirical relationship may provide a means of assessing the average thermal history of the ex-service sample.     

Computer generation of phase diagrams and the associated free energy curves for a binary system

An interactive computer program is introduced in order to make a simultaneous graphical presentation of phase boundaries and their corresponding free energy curves. The program, which uses a graphics display terminal, is a useful tool in teaching thermodynamic concepts involved in phase diagrams, especially for undergraduate students.