Shape memory behavior of FeNiCoTi single and polycrystals

We present experimental and theoretical evidence of thermoelastic martensites in Fe29Ni18Co4Ti alloys. In this class of alloys, the high strength in the austenite domains limits the slip deformation as verified with transmission electron microscopy. The restriction of slip permits a higher degree of recoverability of the transformation. Using both single crystals with [123] orientation and polycrystals, the appearance of martensite plates upon deformation, and their reversion back to austenite upon heating (the shape memory effect), is revealed with in-situ optical microscopy. Theoretical results for the transformation strains and the detwinning of martensite are presented, which demonstrate convincingly the potential of these classes of alloys. Electrical resistance measurements identified the stress and temperature levels at the onset of forward and reverse transformations in isothermal deformation and thermal cycling experiments, respectively. The return of the electrical resistance to its reference value, upon austenite to martensite followed by martensite to austenite transformation, verified the recovery in the transformation strains measured in the experiments.     

In silico discovery of significant pathways in colorectal cancer metastasis using a two‐stage optimisation approach

Accurate and reliable modelling of protein–protein interaction networks for complex diseases such as colorectal cancer can help better understand mechanism of diseases and potentially discover new drugs. Different machine learning methods such as empirical mode decomposition combined with least square support vector machine, and discrete Fourier transform have been widely utilised as a classifier and for automatic discovery of biomarkers for the diagnosis of the disease. The existing methods are, however, less efficient as they tend to ignore interaction with the classifier. In this study, the authors propose a two‐stage optimisation approach to effectively select biomarkers and discover interactions among them. At the first stage, particle swarm optimisation (PSO) and differential evolution (DE) are used to optimise parameters of support vector machine recursive feature elimination algorithm, and dynamic Bayesian network is then used to predict temporal relationship between biomarkers across two time points. Results show that 18 and 25 biomarkers selected by PSO and DE‐based approach, respectively, yields the same accuracy of 97.3% and F1‐score of 97.7 and 97.6%, respectively. The stratified analysis reveals that Alpha‐2‐HS‐glycoprotein was a dominant hub gene with multiple interactions to other genes including Fibrinogen alpha chain, which is also a potential biomarker for colorectal cancer.Inspec keywords: cancer, proteins, particle swarm optimisation, evolutionary computation, support vector machines, recursive functions, Bayes methods, genetics, molecular biophysics, medical computingOther keywords: colorectal cancer metastasis, two‐stage optimisation approach, protein–protein interaction networks, biomarkers, particle swarm optimisation, differential evolution, support vector machine recursive feature elimination, dynamic Bayesian network, stratified analysis, Alpha‐2‐HS‐glycoprotein, hub gene, Fibrinogen alpha chain     

All‐Carbon Nanoarchitectures as High‐Performance Separation Membranes with Superior Stability

The application of graphene‐based membranes is hindered by their poor stability under practical hydrodynamic conditions. Here, nanocarbon architectures are designed by intercalating surface‐functionalized, small‐diameter, multi‐walled carbon nanotubes (MWCNTs) into reduced graphene oxide (rGO) sheets to create highly stable membranes with improved water permeability and enhanced membrane selectivity. With the intercalation of 10 nm diameter MWCNTs, the water permeability reaches 52.7 L m^?2 h^?1 bar^?1, which is 4.8 times that of pristine rGO membrane and five to ten times higher than most commercial nanofiltration membranes. The membrane also attains almost 100% rejection for three organic dyes of different charges. More importantly, the membrane can endure a turbulent hydrodynamic flow with cross‐flow rates up to 2000 mL min^?1 and a Reynolds number of 4667. Physicochemical characterization reveals that the inner graphitic walls of the MWCNTs can serve as spacers, while nanoscale rGO foliates on the outer walls interconnect with the assimilated rGO sheets to instill superior membrane stability. In contrast, intercalating with single‐walled nanotubes fails to reproduce such stability. Overall, this nanoarchitectured design is highly versatile in creating both graphene‐rich and CNT‐rich all‐carbon membranes with engineered nanochannels, and is regarded as a general approach in obtaining stable membranes for realizing practical applications of graphene‐based membranes.     

Saturation boiling of HFE-7100 from a copper surface, simulating a microelectronic chip

Experiments are performed, which investigated the effect of inclination angle, θ, on saturation pool boiling of HFE-7100 dielectric liquid from a smooth, 10×10 mm copper surface, simulating a microelectronic chip. For θ?90° and surface superheats, ΔT_sat>20 K, nucleate boiling heat flux decreases with increased θ, but increases with θ for ΔT_sat<20 K. Similarly, at higher inclinations and ΔT_sat>13 K, nucleate boiling heat flux decreases with increased inclination, but at lower surface superheats the trend is inconclusive. The developed nucleate boiling correlation is within ±10% of the data and the developed correlations for critical heat flux (CHF) and the surface superheat at CHF are within ±3% and ±8% of the data, respectively. Results show that CHF decreases slowly from 24.45 W/cm² at 0° to 21 W/cm² at 90°, then decreases fast with increased θ to 4.30 W/cm² at 180°. The surface superheat at CHF also decreases with θ, from 31.7 K at 0° to 19.9 K at 180°. Still photographs are recorded of pool boiling at different heat fluxes and θ=0°, 30°, 60°, 90, 120°, 150° and 180°. The measured average departure bubble diameter from the photographs taken at the lowest nucleate boiling heat flux of ∼0.5 W/cm² and θ=0° is 0.55±0.07 mm and the calculated departure frequency is ∼100 Hz.     

Thermo‐economic optimization of superheating and sub‐cooling heat exchangers in vapor‐compressed refrigeration system

In this study, superheating and sub‐cooling heat exchangers in vapor‐compressed refrigeration system are analyzed from thermodynamics and economical (refrigeration system operation cost, investment cost) viewpoints. Using four different refrigerants (R22, R502, R134a and R404a), the temperature of condenser at the interval of (35–55°C) and temperature of evaporator at the interval of (?10 to 10°C) have been obtained from the calculation process. The second law analysis (analysis of irreversibility) of a refrigeration system is carried out and then the whole system is optimized thermo‐economically. As a result of calculations, optimum superheating and sub‐cooling temperatures of heat exchanger (superheating, sub‐cooling) areas corresponding to these temperatures are obtained. Copyright © 2007 John Wiley & Sons, Ltd.     

Thermomechanical fatigue,oxidation, and Creep: Part II. Life prediction

A life prediction model is developed for crack nucleation and early crack growth based on fatigue, environment (oxidation), and creep damage. The model handles different strain-temperature phasings(i.e., in-phase and out-of-phase thermomechanical fatigue, isothermal fatigue, and others, including nonproportional phasings). Fatigue life predictions compare favorably with experiments in 1070 steel for a wide range of test conditions and strain-temperature phasings. An oxide growth (oxide damage) model is based on the repeated microrupture process of oxide observed from microscopic measurements. A creep damage expression, which is stress-based, is coupled with a unified constitutive equation. A set of interrupted tests was performed to provide valuable damage progression information. Tests were performed in air and in helium atmospheres to isolate creep damage from oxidation damage.     

Flow characteristic of the horizontal cylinder placed on the plane boundary

In this study, the flow characteristic of the circular cylinder laid on the free surface is studied quantitatively using the particle image velocimetry technique. The flow phenomena in the upstream and downstream regions of the horizontal cylinder and free surface junctions increase the instability of the vortical flow structure significantly. Since the scour and burial process of the pipelines laid on the seabed depends mostly on the hydrodynamic behavior of the flow, the present investigation concentrates on the characterization of the flow structures using the time-averaged and instantaneous flow data. Distributions of velocity vectors, patterns of streamlines, vorticity contours and corresponding Reynolds stress correlations characterize the flow structure in detail.     

Fundamental limits on time delay estimation in dispersed spectrum cognitive radio systems

In this paper, fundamental limits on time delay estimation are studied for cognitive radio systems, which facilitate opportunistic use of spectral resources. First, a generic Cramer-Rao lower bound (CRLB) expression is obtained in the case of unknown channel coefficients and carrier-frequency offsets (CFOs) for cognitive radio systems with dispersed spectrum utilization. Then, various modulation schemes are considered, and the effects of unknown channel coefficients and CFOs on the accuracy of time delay estimation are quantified. Finally, numerical studies are performed in order to verify the theoretical analysis.     

The effect of borax pentahydrate addition to urea formaldehyde on the mechanical characteristics and free formaldehyde content of plywood

In this study, the effects of borax pentahydrate addition to urea formaldehyde (UF) on the bonding characteristics and free formaldehyde content have been studied. Experiments related to the bending strength, withdrawal shear strength and free formaldehyde content have been conducted on the three-layered beech and poplar plywood which are prepared by the addition of borax pentahydrate into their adhesive mixtures in certain amounts. Addition of borax pentahydrate into the adhesive mixture did not statistically affect the bending strength and withdrawal shear strength of the plywood but did reduce the free formaldehyde content.