A prioritization method for replacement of water mains using rank aggregation

Pipe breaks in municipal water distribution networks may cause serious damage economically and socially. Existing methods for replacement scheduling of pipes do not provide practical indicators for replacing an individual deteriorated pipe. This work formulates the selection problem as the decision of preference ordering or ranking and proposes a bipartite ranking-based approach. The suggested approach also considers loss from broken pipes in terms of the costs associated with broken water main and its repair. We use rank aggregation method to integrate multiple ranks into replacement order of water mains. The suggested framework prioritizes current pipe sections for replacement based on the aggregated ranks. Multiple ranks given by the reliability of water pipe sections are aggregated and a cost effective policy for pipe replacement is derived.     

Synthesis and characterization of the carbon nanotube-based composite materials with poly(3,4-ethylenedioxythiophene)

We report a procedure to prepare a conducting nano-composites composed of multi-walled carbon nanotubes (MWNTs) and PEDOT by using a poly(sodium 4-styrenesulfonate) (PSSNa) as a inter-linking molecule between MWNT and PEDOT. When PSSNa chains are introduced on the MWNTs via physicochemical interaction, the surface of MWNT becomes negatively charged, and PSS-modified MWNTs promote the effective association of the positively charged PEDOT chains. The resulting MWNT-PSS/PEDOT composites are characterized by a better interconnection between MWNT and PEDOT components.     

Active sites in Cu/ZnO/ZrO2 catalysts for methanol synthesis from CO/H2

Among various Cu/ZnO/ZrO₂ catalysts with the Cu/Zn ratio of 3/7, the one with 15 wt.% of ZrO₂ obtains the best activity for methanol synthesis by hydrogenation of CO. The TPR, TPO and XPS analyses reveal that a new copper oxide phase is formed in the calcined Cu/ZnO/ZrO₂ catalysts by the dissolution of zirconium ions in copper oxide. In addition, the Cu/ZnO/ZrO₂ catalyst with 15 wt.% of ZrO₂ turns out to contain the largest amount of the new copper oxide phase. When the Cu/ZnO/ZrO₂ catalysts is reduced, the Cu²⁺ species present in the ZrO₂ lattice is transformed to Cu⁺ species. This leads to the speculation that the addition of ZrO₂ to Cu/ZnO catalysts gives rise to the formation of Cu⁺ species, which is related to the methanol synthesis activity of Cu/ZnO/ZrO₂ catalyst in addition to Cu metal particles. Consequently, the ratio of Cu⁺/Cu⁰ is an important factor for the specific activity of Cu/ZnO/ZrO₂ catalyst for methanol synthesis.     

Aging behavior of metal oxide aerogels

Aerogels of titania, zirconia, niobia, and silica were prepared by CO₂ supercritical drying of the corresponding alcogels. Their porous texture could be modified by further aging of the alcogels. This kind of textural modification was found to be different according to the nature of the metal precursor and sol-gel conditions. This paper was presented at the 8th APCChE (Asia Pacific Confederation of Chemical Engineering) Congress held at Seoul between August 16 and 19, 1999.     

Water‐soluble urethane acrylate ionomers: Effect of molecular structure on ultraviolet coating properties

Water‐soluble urethane acrylate ionomers containing dimethylolpropionic acid (DMPA) were synthesized, changing the molecular components, and their ultraviolet (UV) coating properties were studied. It was found that the UV coating properties of the urethane acrylate ionomer films were very dependent on the molecular weight of the soft segment, the type of the diisocyanate, and the amount of neutralization. In general observations, the cured films displayed much improved mechanical properties, compared with conventional urethane acrylate film not containing ionic groups. The main reason for the improved film properties seemed to be attributed to the presence of ionic groups in the network. In dynamic mechanical analysis, two distinct glass transition temperatures, corresponding to the ionic hard domains and soft domains, were detected at high content of ionic groups. This suggested that the urethane acrylate network be composed of two phases. Consequently, the ionic hard domains formed by the phase separation from crosslinked network could act as a reinforcing filler, which possibly explains the improved film properties of the urethane acrylate ionomer films. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1853–1860, 2000     

Effects of particle size of Al(OH)3 on electrical properties of EPDM compounds

Effects of particle size of Al(OH)₃ (ATH) filler on electrical properties of ethylene propylene diene terpolymer (EPDM)/ATH compounds were studied. It was found that tracking and erosion resistance of EPDM/ATH compounds decreased while dielectric properties and 90°C water resistance were improved with the increase of particle size. Homocharge accumulates in the compounds, which increases first and then decreases with the increase of particle size. This was explained by the change of particle‐to‐particle distance due to filler size.     

Geometric error measurement of spiral bevel gears using a virtual gear model for STEP-NC

Geometric error measurement is required to evaluate the grade of the manufactured gears. Due to the complexity of the spiral bevel gear, direct measurement with the physical part has been conducted in a very limited way. In this paper, we present an indirect measurement based on the virtual gears model (VGM), obtained by NUBS fitting of the surface points measured by CMM (coordinate measuring machine). By comparing the VGM with CAD model (soft-master model), various errors such as tooth profile error and tooth trace error can be automatically measured. The developed method is simple and robust without requiring a special measuring device, and hence it can be applied for the industrial practice as a means for measuring the tooth profile and tooth trace errors which cannot be measured by the conventional method. Further, the model-based method can be incorporated on the advanced CNC controller based on the new CAM–CNC interface scheme of STEP-NC [STEP (standard for transfer and exchange of product model data) based data model for CAM and CNC interface] as an on-line inspection module. Algorithmic details together with experimental validation results are given.