Fusion technology activities at JET: Latest results

The JET Task Force Fusion Technology (TF-FT) was launched in 2000 to use the unique capabilities, facilities and operating experience at JET to provide significant contributions to the research programme on both JET and ITER. This paper presents the most recent results obtained within the JET TF-FT programme.The Tritium (T) retention measurements have confirmed high surface but little bulk T concentrations on the MKII-SRP divertor tiles and T thermal desorption tests confirmed the necessity to reach at least 600 °C. From the 2007 shutdown the MKII-HD (more ITER like) divertor has revealed some slight changes in the nature of the erosion/deposition. In order to improve analysis, time resolution devices such as quartz micro-balances and rotating collectors have been located beneath the divertor for deposition and plasma physics correlations. Due to improvement of dedicated models and technologies, in situ laser techniques for detritiation and characterisation/removal have provided encouraging results on quantitative characteristics (composition, thickness, adherence, temperature) of deposited films on plasma facing components. A particular effort on temperature control of the new metallic ITER-like wall (ILW) that is presently being installed in JET has been pursued with active laser infrared thermography. JET TF-FT also contributes to the operator strategy to comply with the safety agency requirements for T management. Recent results on two major topics purification of tritiated water and development of the ³He method for the determination of the T concentration in waste drums are presented. Finally, this paper also presents some activities in preparation of the ILW for the pre-characterisation of marker tiles and the refurbishment of diagnostics for deposition characterisation.     

X-ray microbeam transmission/fluorescence method for non-destructive characterization of tungsten coated carbon materials

Tungsten erosion, its subsequent transport and redeposition are of great interest, because a full tungsten divertor is foreseen to be used during the deuterium–tritium operational phase of ITER. The erosion of tungsten and carbon marker layers was extensively studied in the outer divertor of ASDEX Upgrade (AUG), and work is currently in progress to completely replace the existing JET CFC tiles with tungsten-coated tiles within the JET ITER-like wall project. The need for fast and non-destructive method which allows the quantitative determination of the thickness of a tungsten coating on a carbon material on large areas led us to evaluate a combined absorption/fluorescence X-ray (XRTF) technique. The method can provide fast analysis, high spatial resolution and a material selective detection of deposited layers and inclusions. It was applied on W coated fine grain graphite (FGG) tiles from AUG's divertor. It is proved that the method is able to provide information about the uniformity of the tungsten coating on a graphite or CFC substrate whilst the technique can be used to determine the thickness of the tungsten and other marker materials coatings. It represents a unique instrument for the post-mortem analysis of the coatings.     

Influence of High-Temperature Heat Treatment on Barrier and Functional Properties of Polyolefin-Coated Papers

In this study, the effect of heat treatment on barrier and functionality of polyolefin-coated papers was investigated. The aim was to find the optimal improvements on barrier without losing the applicability of the materials due to physical damages. The results of the study proved considerable improvement in barrier characteristics of the structures. Both water vapor and oxygen transmission rates of LDPE-coatings decreased linearly following the set-temperature until 200°C. At this point, the treatment caused a continuing decrease in oxygen transmission achieving 10 × lower transmission levels than the untreated structure, whereas moisture transport faced corresponding but lower increase. This was considered to be caused by the difference in diameter of the H₂O and O₂ molecules; the smaller water molecules are able to penetrate between spherulites, whose size increased due to higher treatment temperature followed by cooling.     

Layered dielectric–magnetic composite structures for Rf-applications

In this paper multilayer magnetic–dielectric composite structures for high frequency applications are introduced. The 0–3 type dielectric and magnetic composites with homogeneously distributed ceramic inclusions were fabricated by mixing extrusion and injection moulding. Magnetic Yttrium Iron Garnet (YIG) and Z-type Hexaferrite (HexaZ) as well as paraelectric Barium Strontium Titanate (BST) powders were used to enhance the permittivity and permeability of the composites. The magnetic–dielectric multilayer composites were constructed by hot-laminating magnetic and dielectric layers in turn to create a solid 2-2 type composite structure. The microstructure, high frequency dielectric and magnetic properties of individual layers and 2-2 composites were investigated and measured. The measurement results indicate that such multimaterial multilayer structures are good candidates for components with reduced dielectric and magnetic losses. Moreover, the observed good frequency stability and the cut-off frequencies above 1 GHz suggested that the composites could be utilized in, e.g., sophisticated functional circuit boards and RF devices.     

Fish bile used to detect estrogenic substances in treated sewage water

Endocrine disrupting effects on fish associated with sewage treatment effluents have been demonstrated in several studies. To investigate if the effluents from two modern Swedish sewage treatment plants contained estrogenic substances, juvenile rainbow trout were exposed to sewage water before and after the last treatment step which is a sand filter. As a biomarker for estrogenic effect, vitellogenin was analysed in the blood plasma of the exposed fish. To identify substances possibly responsible for the effect, bile fluid from the exposed fish were analysed with GC/MS. Elevated levels of vitellogenin were only seen in the fish exposed at one of the sewage treatment plants, the one with shorter residence time in the biological treatment steps, which suggests that the residence time is of importance for the ability to reduce the amount of estrogenic substances in the sewage water. The highest elevation of vitellogenin was seen in the fish exposed to water before the sand filter, which indicates that the sand filter contributes to further reduction of estrogenic substances in the sewage water. In bile from the same group of fish, considerably higher concentrations of estrone, bisphenol A and 4-nonylphenol (4.0 microg/g bile, 23 microg/g bile and 24 microg/g bile, respectively) were observed compared to bile from control fish (<0.04 microg/g bile, 0.21 microg/g bile, and 3.5 microg/g bile, respectively). The more potent steroidal estrogens were suggested to be major contributors to the observed estrogenic effect, although xenoestrogens were detected at higher concentrations in the bile fluid.     

Energy Harvesting Research: The Road from Single Source to Multisource

Energy harvesting technology may be considered an ultimate solution to replace batteries and provide a long‐term power supply for wireless sensor networks. Looking back into its research history, individual energy harvesters for the conversion of single energy sources into electricity are developed first, followed by hybrid counterparts designed for use with multiple energy sources. Very recently, the concept of a truly multisource energy harvester built from only a single piece of material as the energy conversion component is proposed. This review, from the aspect of materials and device configurations, explains in detail a wide scope to give an overview of energy harvesting research. It covers single‐source devices including solar, thermal, kinetic and other types of energy harvesters, hybrid energy harvesting configurations for both single and multiple energy sources and single material, and multisource energy harvesters. It also includes the energy conversion principles of photovoltaic, electromagnetic, piezoelectric, triboelectric, electrostatic, electrostrictive, thermoelectric, pyroelectric, magnetostrictive, and dielectric devices. This is one of the most comprehensive reviews conducted to date, focusing on the entire energy harvesting research scene and providing a guide to seeking deeper and more specific research references and resources from every corner of the scientific community.     

Line creep in paper peeling

The dynamics of a “peeling front” or an elastic line is studied under creep (constant load) conditions. Our experiments show in most cases an exponential dependence of the creep velocity on the inverse force (mass) applied. In particular, the dynamical correlations of the avalanche activity are discussed here. We compare various avalanche statistics to those of a line with non-local elasticity, and study various measures of the experimental avalanche-avalanche and temporal correlations such as the autocorrelation function of the released energy and aftershock activity. From all these we conclude, that internal avalanche dynamics seems to follow “line depinning”-like behavior, in rough agreement with the depinning model. Meanwhile, the correlations reveal subtle complications not implied by depinning theory. Moreover, we also show how these results can be understood from a geophysical point of view.     

Modeling errors due to Timoshenko approximation in damage identification

The use of accurate computational models for damage identification problems may lead to prohibitive costs. Damage identification problems are often characterized as inverse ill-posed problems. Thus, the use of approximate models such as simplified physical and/or reduced-order models typically yields misleading results. In this paper, we carry out a preliminary study on a particular simplified physical model, the Timoshenko beam model in the context of damage identification. The actual beam is a two-dimensional relatively high aspect ratio (thickness/length) beam with a distributed damage that is modeled as a spatially varying Young modulus. We state the problem in the Bayesian framework for inverse problems and carry out approximative marginalization over the related modeling errors. The numerical experiments suggest that the proposed approach yields more stable results than using the Timoshenko beam model as an accurate model. Due to the severity of the Timoshenko approximation, however, the posterior error estimates of the proposed approach are not always feasible in the probabilistic sense.