Electrical Resistance Tomography imaging of concrete

We apply Electrical Resistance Tomography (ERT) for three dimensional imaging of concrete. In ERT, alternating currents are injected into the target using an array of electrodes attached to the target surface, and the resulting voltages are measured using the same electrodes. These boundary measurements are used for reconstructing the internal (3D) conductivity distribution of the target. In reinforced concrete, the metallic phases (reinforcing bars and fibers), cracks and air voids, moisture gradients, and the chloride distribution in the matrix carry contrast with respect to conductivity. While electrical measurements have been widely used to characterize the properties of concrete, only preliminary results of applying ERT to concrete imaging have been published so far. The aim of this paper is to carry out a feasibility evaluation with specifically cast samples. The results indicate that ERT may be a feasible modality for non-destructive evaluation of concrete.     

Interactive multi-frame reconstruction for mobile devices

The small size of handheld devices, their video capabilities and multiple cameras are under-exploited assets. Properly combined, the features can be used for creating novel applications that are ideal for pocket-sized devices, but may not be useful in laptop computers, such as interactively capturing and analyzing images on the fly. In this paper we consider building mosaic images of printed documents and natural scenes from low resolution video frames. High interactivity is provided by giving a real-time feedback on the video quality, while simultaneously guiding the user’s actions. In our contribution, we analyze and compare means to reach interactivity and performance with sensor signal processing and GPU assistance. The viability of the concept is demonstrated on a mobile phone. The achieved usability benefits suggest that combining interactive imaging and energy efficient high performance computing could enable new mobile applications and user interactions.     

Enhancing perceived quality of compressed images and video with anisotropic diffusion and fuzzy filtering

Fuzzy filtering has recently been applied and optimized for reducing distortion in compressed images and video. In this paper, we present a method combining the powerful anisotropic diffusion equations with fuzzy filtering for removing blocking and ringing artifacts. Due to the directional nature of these artifacts, we have applied directional anisotropic diffusion. In order to improve the performance of the algorithm, we select the threshold parameter for the diffusion coefficient adaptively. Two different methods based on this approach are presented: one designed for still images and the other for YUV video sequences. For the video sequences, different filters are applied to luminance (Y) and chrominance (U,V) components. The performance of the proposed method has been compared against several other methods by using different objective quality metrics and a subjective comparison study. Both objective and subjective results on JPEG compressed images, as well as MJPEG and H.264/AVC compressed video, indicate that the proposed algorithms employing directional and spatial fuzzy filters achieve better artifact reduction than other methods. In particular, robust improvements with H.264/AVC video have been gained with several different content types.     

Bio‐hybrid nanocomposite coatings from sonicated chitosan and nanoclay

Nanocomposite films and coatings with improved properties were produced from ultrasonic dispersed chitosan and hydrophilic bentonite nanoclay. Bio‐hybrid coatings were applied onto argon–plasma‐activated LDPE coated paper. The intercalation of chitosan in the silicate layers was confirmed by the decrease of diffraction angles as the chitosan/nanoclay ratio increased. Nanocomposite films and multilayer coatings had improved barrier properties against oxygen, water vapor, grease, and UV‐light transmission. Oxygen transmission was significantly reduced under all humidity conditions. In dry conditions, over 99% reduction and at 80% relative humidity almost 75% reduction in oxygen transmission rates was obtained. Hydrophilic chitosan was lacking the capability of preventing water vapor transmission, thus total barrier effect of nanoclay containing films was not more than 15% as compared with pure chitosan. Because to very thin coatings (≤1 μm), nanoclay containing chitosan did not have antimicrobial activity against test strains. All coating raw materials were “generally recognized as safe” (GRAS) and the calculated total migration was in all cases ≤6 mg/dm², thus the coatings met the requirements set by the packaging legislation. Processing of the developed bio‐hybrid nanocomposite coated materials was safe as the amounts of released particles under rubbing conditions were comparable with the particle concentrations in a normal office environment. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Moderate anisotropy in the electrical conductivity of bulk MWCNT/epoxy composites

Bulk aligned multi-walled carbon nanotube films and their epoxy composites were prepared and their DC and AC conductivity studied. Nanotube films of up to 2 mm thickness were grown by catalytic chemical vapor deposition. Composites of nanotubes were made by infiltrating the films with a commercial epoxy. DC electrical resistivities in the axial direction of as-grown and purified films were found to be ∼1.2 Ωmm and ∼3.4 Ωmm, respectively. For the transverse direction the resistivity values were higher only with a factor of ∼2. In the case of composites, anisotropy is more pronounced showing more than an order of magnitude higher resistivity in the transverse direction (∼71.4 Ωmm) as compared to the axial value (∼4.2 Ωmm). AC behavior of the films investigated between 1 MHz and 3 GHz shows the presence of inductive and capacitive components at frequencies above ∼100 MHz. The moderate anisotropy for both DC and AC electrical properties are explained on the basis of the films’ structure combined with percolation theory and equivalent circuit models.     

Electromagnetic field computation in semiconductor laser resonators

An electromagnetic method based on rigorous diffraction theory of gratings is applied to the analysis of fields in semiconductor laser cavities. The method is based on the Fourier modal method; it is fully rigorous for infinitely periodic resonators and highly accurate for single resonators when absorbing boundary conditions are applied. Fundamental-mode intracavity and near-field distributions are evaluated for some selected geometries, and resonance frequencies are predicted.     

Note — Preliminary Applications of Response Surface Modelling to the Evaluation of Optimal Growth Conditions for Beer‐spoiling Pediococcus damnosus

Beer‐spoiling lactic acid bacteria (LAB) belong to the most harmful contaminants in the brewing industry and various rapid molecular detection methods have been introduced for the detection of these organisms. However, the enrichment cultivation steps needed prior to detection by molecular methods can extend the duration of the analytical procedure by up to several days. The use of brewery‐specific enrichment cultivation media has been recommended due to the large variety within the group of LAB, as well as differences in the microbes encountered at the breweries. In contrast to using a general medium that may support only the growth of some LAB, the combination of several media could allow detection of all relevant LAB. The aim of the present study was to show the effects of shifts in the cultivation conditions and media on the growth of beer‐spoiling LAB using one of the most frequently encountered species, Pediococcus damnosus, as an example. Based on the variable analysis, significant factors could be recognized and their effects on lag‐times and growth rates were compared by means of response surface modelling.     

Rotation manifold <Emphasis Type="Italic">SO</Emphasis>(3) and its tangential vectors

In this paper, we prove that incremental material rotation vectors belong to different tangent spaces of the rotation manifold SO(3) at a different instant. Moreover, we show that the material tangent space as the tangent space at unity is not a possible definition yielding geometrically inconsistent results, although this kind of definition is widely adopted in applied mechanics community. In addition, we show that the standard Newmark integration scheme for incremental rotations neglects first order terms of rotation vector, not third order terms. Finally, we show that the rotation interpolation of extracted nodal values on the rotation manifold is not an objective interpolation under the observer transformation. This clarifies controversy about the frame-indifference of geometrically exact beam formulations in their finite element implementations.     

Antioxidative properties and enzymatic synthesis of ascorbyl FA esters

Efficient synthesis of unsaturated FA esters of ascorbic acid is possible with only a small excess of one of the reactants in t-amyl alcohol using Candida antarctica lipase as biocatalyst. Using free acids, we obtained yields that were comparable to yields reached using vinyl-activated acyl donors (71, 80, and 86% yields of esters with FA excesses of 1∶1, 1∶1.5, and 1∶2, respectively). As very low water activity is needed to achieve sufficiently high yields of product, molecular sieves were used to improve the ascorbyl ester yields. Ascorbyl oleate is more amorphous and has a much lower m.p. and lower enthalpy of fusion than ascorbyl palmitate. This leads to a higher solubility of ascorbyl oleate in oil, resulting in an increased antioxidant effect compared to that of the palmitate. In an accelerated storage test using deodorized rapeseed oil, samples incubated with ascorbyl palmitate showed noticeable oxidation after 1 wk of storage, whereas samples incubated with ascorbyl oleate displayed negligible oxidation for 9 and 4 wk at 30 and 40°C, respectively.