Improved nonlinear trajectory tracking using RBFNN for a robotic helicopter

This paper presents a backstepping control method using radial‐basis‐function neural network (RBFNN) for improving trajectory tracking performance of a robotic helicopter. Many well‐known nonlinear controllers for robotic helicopters have been constructed based on the approximate dynamic model in which the coupling effect is neglected; their qualitative behavior must be further analyzed to ensure that the unmodeled dynamics do not destroy the stability of the closed‐loop system. In order to improve the controller design process, the proposed controller is developed based on the complete dynamic model of robotic helicopters by using an RBFNN function approximation to the neglected dynamic uncertainties, and then proving that all the trajectory tracking error variables are globally ultimately bounded and converge to a neighborhood of the origin. The merits of the proposal controller are exemplified by four numerical simulations, showing that the proposed controller outperforms a well‐known controller in (J. Robust Nonlinear Control 2004; 14 (12):1035–1059). Copyright © 2009 John Wiley & Sons, Ltd.     

Robust observer–controller compensator design using the loop shaping design procedure and the algebraic method

This paper investigates robust observer‐controller compensator design using Vidyasagar's structure (VS). VS has a unit matrix parameter H similar to the Q parameter for the Youla–Kucera parameterization. VS can be designed based on the left coprimeness of the central controller in the H_∞‐loop shaping design procedure (H_∞‐LSDP) and therefore can preserve the intrinsic properties of the H_∞‐LSDP. This paper introduces algebraic methods to simplify the design of H in the VS controller by solving specific algebraic equations. In particular, the algebraic design of H can achieve two things. First, a dynamic H adjusts the tracking performance and yields the integral action. Second, a dynamic H rejects the input and output sinusoidal disturbances with known frequencies. These attributes are indications of the flexibility of the proposed method since the output‐feedback controller design of the H_∞‐LSDP cannot easily deal with such conditions. This paper discusses the achieved loop and the closed‐loop behavior of the system with VS, and also gives two numerical examples. The first example shows that the proposed method results in a better design in many aspects than the resulting from H_∞‐LSDP. The second example shows the application of the proposed method to rejecting input and output step disturbances, and input and output multiple sinusoidal disturbances, for which the H_∞‐LSDP can hardly be used. Copyright © 2009 John Wiley & Sons, Ltd.     

Organic wavelength‐converting‐film‐based hybrid planar white light‐emitting diodes

Abstract— In this study, organic wavelength‐converting films (WCFs) applied to InGaN blue LED‐based hybrid planar WLED has been fabricated. The organic dye layer in the WCF was formed between the upper and bottom polymer sheets by using a simple roll‐laminating technique. Subsequently, the hybrid planar WLEDs have been fabricated based upon these films. The luminous efficiency of green WCF‐based hybrid planar WLEDs with a single blue LED chip was 34.6 lm/W and that of red‐WCF‐assisted green WCF‐based hybrid planar WLEDs was 27.3 lm/W under 20 mA. The use of WCF to fabricate hybrid planar WLEDs showed better stability than that of directly coating organic color‐convergence materials (CCMs) on the LED chips. It only decreased to about 10% of the initial wavelength‐converting intensity after 1 hour of continual operation at 20 mA.     

Frictional properties of VA‐mode alignment‐film surfaces studied by frictional force microscopy

Abstract— The surface‐friction characteristics of the post‐bake temperature were compared to that of the rubbing condition on VA‐mode alignment films (AFs) using frictional force microscopy (FFM). The surface roughness and the surface frictional force increased when the temperature was elevated. However, the frictional asymmetry could not be detected by the frictional loop due to the instability of the side‐chain molecular arrangement. For the inter‐influences of the total friction and surface roughness, the density of the side chain was changed and it was intentionally rubbed for evaluation. The results showed that the total friction was higher when the rubbing was stronger and side‐chain density lower, and the surface roughness also increased in the same manner. This can be explained by the potential interaction due to the curved structure of the side‐chain surface that establishes the probe that is scanned and the top surface layer. In order to confirm the influence of the pre‐tilt angle on the tilt of the side chain, a test cell was produced under the same conditions and evaluated. The results showed that the pre‐tilt‐angle decreased according to the difference in density of the side chain and strength of rubbing after injecting liquid‐crystal (LC).     

Laser‐irradiated zinc oxide thin‐film transistors fabricated by solution processing

Abstract— This study investigates the effects of subjecting zinc oxide (ZnO) thin films to laser irradiation. The optical, structural, and electrical properties of the as‐deposited and laser‐irradiated films at different laser energies were studied. The transmittances without/with laser irradiation showed a net increase from 85 to 92% (@550 nm) for 250‐nm ZnO films, indicating an improvement in sample crystal linity. In addition, laser treatment decreased the ZnO band gap. Composition structure analysis shows that the crystallinity increased when the laser energy increased. Thin‐film transistors (TFTs) with a ZnO active layer were fabricated. The mobility of as‐deposited ZnO TFT devices (0.19 cm²/V‐sec) increased more than 2.5 times for ZnO of unirradiated laser treatment (0.49 cm²/V‐sec).     

Device reliability under electrical stress and photo response of oxide TFTs

Abstract— The stability of oxide TFTs has been the main focus of this research and is probably the most crucial requirement for the successful application to flat‐panel displays. Although the high Fermi level of oxide semiconductors makes TFTs basically stable under electrical stress, the device reliability under diverse variations of electrical stress is affected by materials such as active semiconductors and gate insulators, processes for the formation of back/front channels and passivation layers, and device configurations among other things. How these factors affect the device reliability have been investigated and a review of the stability is presented. In addition, several categories of the light instability of oxide TFTs is presented and the origin is discussed.     

Optimum design of electromagnetic shielding rooms with minimum usage of absorbing materials

In this article, a novel method has been proposed to optimize the electromagnetic shielding rooms. This method is based on using minimum electromagnetic absorbing materials on the inner surface of the rooms. The positions of the absorbing materials are found optimally to produce a “best” performance for the shielding rooms. The ray‐tracing method is used to predict the shielding effectiveness (SE) of the electromagnetic shielding rooms with apertures. The performance of the proposed method is verified by a comprehensive example. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE 2010.     

An adaptive peer-to-peer live streaming system with incentives for resilience

Recently, there have been a lot of research efforts on peer-to-peer (P2P) live streaming services. P2P systems can be easily deployed since a participating peer’s resources (i.e., upload link bandwidth) can be exploited to distribute contents. However, how to adapt to leaving peers and how to encourage peers to contribute resources voluntarily are still challenging issues. In this paper, we propose Climber, an adaptive P2P live streaming system with incentives for resilience. Climber is based on the hybrid structure of a tree and a mesh, so as to achieve self-improvement and adaptation to users’ dynamic joining and leaving. Moreover, Climber substantiates an incentive mechanism that provides better resilience for peers with more upload bandwidth allocated. Simulation results reveal that Climber significantly reduces the topology maintenance cost compared to SplitStream and NICE-PRM. Also, simulation and analytical results verify that Climber can bound the level of disruption by dynamically adapting to the user churning rate.     

Chattering reduction of sliding mode control by low‐pass filtering the control signal

The conventional approach to reducing control signal chattering in sliding mode control is to use the boundary layer design. However, when there is high‐level measurement noise, the boundary layer design becomes ineffective in chattering reduction. This paper, therefore, proposes a new design for chattering reduction by low‐pass filtering the control signal. The new design is non‐trivial since it requires estimation of the sliding variable via a disturbance estimator. The new sliding mode control has the same performance as the boundary layer design in noise‐free environments, and outperforms the boundary layer design in noisy environments. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society