Differentiated Service Provision in Optical CDMA Network Using Power Control

A simple scheme to use power control for differentiated service provision is proposed for the optical code-division multiple-access network. The main advantages of this scheme are: 1) Interference from other users can be eliminated theoretically. 2) The decoder with simple configuration can be used as compared to that in a previous power control scheme. 3) The design procedure of various service requirements in one network is simplified.      

Robust cerebellar model articulation controller design for unknown nonlinear systems

In this study, a robust cerebellar model articulation controller (RCMAC) is designed for unknown nonlinear systems. The RCMAC is comprised of a cerebellar model articulation controller (CMAC) and a robust controller. The CMAC is utilized to approximate an ideal controller, and the weights of the CMAC are on-line tuned by the derived adaptive law based on the Lyapunov sense. The robust controller is designed to guarantee a specified H/sup /spl infin// robust tracking performance. In the RCMAC design, the sliding-mode control method is utilized to derive the control law, so that the developed control scheme has more robustness against the uncertainty and approximation error. Finally, the proposed RCMAC is applied to control a chaotic circuit. Simulation results demonstrate that the proposed control scheme can achieve favorable tracking performance with unknown the controlled system dynamics.     

Bipolar switching characteristics of low-power Geo resistive memory

We reported an ultra low-power resistive random access memory (RRAM) combining a low-cost Ni electrode and covalent-bond GeO_x dielectric. This cost-effective Ni/GeO_x/TaN RRAM device has very small set power of 2 μW, ultra-low reset power of 130 pW, greater than 1 order of magnitude resistance window, and stable retention at 85 °C. The current flow at low-resistance state is governed by Poole-Frenkel conduction with electrons hopping via defect traps, which is quite different from the filament conduction in metal-oxide RRAM.     

Reranking Methods for Visual Search

Most semantic video search methods use text-keyword queries or example video clips and images. But such methods have limitations. To address the problems of example-based video search approaches and avoid the use of specialized models, we conduct semantic video searches using a reranking method that automatically reorders the initial text search results based on visual cues and associated context. We developed two general reranking methods that explore the recurrent visual patterns in many contexts, such as the returned images or video shots from initial text queries, and video stories from multiple channels.     

Characteristic of copper wire and transient analysis on wirebonding process

In the present paper, two major analyses are achieved. In the first, experimental procedures were accomplished to measure tensile mechanical properties of copper (Cu) wire (? = 1 mil) before/after electric flame-off (EFO). Characteristics of free air ball (FAB), heat affected zone (HAZ) and thermal stable zone (TSZ) in as-drawn wire have been carefully investigated by microhardness, self-design pull test fixture, nanoindentation and atomic force microscopy (AFM). A 2nd EFO real-time technique has been conducted to reduce the strength of Cu wire and increase the bonding region. Secondary, with the obtained experimental material data, a comprehensive finite element wirebonding model based on explicit time integration software ANSYS/LS-DYNA is developed to predict the overall strain/stress distributions on the aluminum (Al) bond pad. Finite element analysis (FEA) results demonstrate that plastic deformation on Al bond pad around smashed FAB can be reduced by increasing the surface roughness on FAB. A series of comprehensive parametric studies were conducted in this research.     

Stepped-impedance directional coupler with enhanced isolation using interdigital capacitance compensation

A novel and successful stepped-impedance coupler with enhanced isolation is presented. By incorporating the distributed interdigital capacitance at the ends of the coupled section in the planar structure, the even- and odd-mode phase velocities can be equalised so as to enhance the isolation. Measured results show an enhanced isolation of 47.5 dB at the centre frequency 2.4 GHz and a size reduction of 30% when compared with the conventional parallel-line coupler. It is also shown that the coupling frequency flatness is as broadband as 3.1 GHz.     

Nanoporous platinum counter electrodes by glancing angle deposition for dye-sensitized solar cells

We report an effective way to produce nanoporous Pt counter electrodes of dye-sensitized solar cells by the glancing-angle deposition (GLAD) technique. By controlling the orientation of the substrate relative to the incident Pt vapor flux during the deposition, nanoporous films composed of inclined nm-scale columns were produced through the self-shadowing effect. Pt counter electrodes having varied nanoporous structures were characterized for their morphological and electrochemical properties, and were subjected to device studies to establish the correlation with DSSC characteristics/performances. The results suggest that the nanoporous GLAD Pt electrodes can effectively enhance active surface areas, the catalytic ability and charge exchange at the Pt/electrolyte interface of a DSSC. As a result, the quantum efficiency, short-circuit current, and power conversion efficiency of the DSSC can be enhanced by up to 12–13% with using the nanoporous GLAD Pt counter electrodes.     

A Versatile Fluoro‐Containing Low‐Bandgap Polymer for Efficient Semitransparent and Tandem Polymer Solar Cells

The versatility of a fluoro‐containing low band‐gap polymer, poly[2,6‐(4,4‐bis(2‐ethylhexyl)‐4H‐cyclopenta[2,1‐b;3,4‐b’]dithiophene)‐alt‐4,7‐(5‐fluoro‐2,1,3‐benzothia‐diazole)] (PCPDTFBT) in organic photovoltaics (OPVs) applications is demonstrated. High boiling point 1,3,5‐trichlorobenzene (TCB) is used as a solvent to manipulate PCPDTFBT:[6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) active layer morphology to obtain high‐performance single‐junction devices. It promotes the crystallization of PCPDTFBT polymer, thus improving the charge‐transport properties of the active layer. By combining the morphological manipulation with interfacial optimization and device engineering, the single‐junction device exhibits both good air stability and high power‐conversion efficiency (PCE, of 6.6%). This represents one of the highest PCE values for cyclopenta[2,1‐b;3,4‐b’]dithiophene (CPDT)‐based OPVs. This polymer is also utilized for constructing semitransparent solar cells and double‐junction tandem solar cells to demonstrate high PCEs of 5.0% and 8.2%, respectively.     

Polarity Effect in a Sn3Ag0.5Cu/Bismuth Telluride Thermoelectric System

This study investigates electromigration in Bi₂Te₃ thermoelectric (TE) material systems and the effectiveness of the diffusion barrier under current. The Peltier effect on the interfacial reaction was decoupled from the effect of electromigration. After connecting p- and n-type Bi₂Te₃ to Sn3Ag0.5Cu (SAC305) solders, different current densities were applied at varying temperatures. The Bi₂Te₃ samples were fabricated by the spark plasma sintering technique, and an electroless nickel-phosphorous (Ni-P) layer was deposited at the solder/TE interfaces. The experimental results confirm the importance of the Ni diffusion barrier in joint reliability. Intermetallic compound layers (Cu,Ni)₆Sn₅ and NiTe formed at the solder/Ni-P and Ni-P/substrate interfaces, respectively. The experimental results indicate that the mechanism of NiTe and (Cu,Ni)₆Sn₅ compound growth was dominated by the Peltier effect at high current density. When the current density was low, the growth of NiTe was affected by electromigration but the changes of thickness for (Cu,Ni)₆Sn₅ were not obvious.     

Adaptive decentralized control of robot manipulators driven by current-fed induction motors

In this paper, an adaptive decentralized control scheme with a rotor-flux observer is proposed for the tracking control of robot manipulators actuated by current-fed induction motors. To cope with all parametric uncertainties in the electromechanical systems, an adaptive law is designed so that all the signals of closed-loop systems are bounded, and the tracking errors in position, velocity and rotor fluxes converge to a residual set.