A Randomized Linear-Work EREW PRAM Algorithm to Find a Minimum Spanning Forest

We present a randomized EREW PRAM algorithm to find a minimum spanning forest in a weighted undirected graph. On an n -vertex graph the algorithm runs in o(( log n) ^{1+ ɛ} ) expected time for any ɛ >0 and performs linear expected work. This is the first linear-work, polylog-time algorithm on the EREW PRAM for this problem. This also gives parallel algorithms that perform expected linear work on two general-purpose models of parallel computation—the QSM and the BSP.     

Multi-rate model predictive control of particle size distribution in a semibatch emulsion copolymerization reactor

A multi-rate model predictive controller algorithm is presented for the in-batch closed-loop control of the full particle size distribution (PSD) in a semibatch emulsion copolymerization system. The lack of frequent measurements of the PSD and the measurement delay of these measurements are addressed through the use of frequent density measurements from which the current conditions of the system are estimated. The high dimensionality of the discretized full PSD is reduced by the use of model order reduction based on principal component analysis. This method effectively reduces the size of the problem while preserving the main characteristics of the population balance system. Disturbances that perturb the surfactant and monomer amounts inside the semibatch vinyl acetate–butyl acrylate reactor are considered to demonstrate the performance of the proposed control algorithm.     

Effect of pressure on three catalytic partial oxidation reactions at millisecond contact times

The effects of pressure on reactant conversion and product selectivities in three catalytic oxidation systems have been examined at pressures between 1 and > 5 atm. Reaction was sustained autothermally near adiabatic operating conditions at temperatures of 1000°C with residence times over the noble metal catalysts between 10^–4 and 10^–2 s. The three systems investigated were (1) HCN synthesis over Pt-10% Rh gauze catalysts, (2) methane oxidation to synthesis gas (CO and H₂) over rhodium-coated monoliths, and (3) ethane conversion to ethylene over platinum-coated monoliths. We find that selectivities in all three reactions do not change dramatically with approximately a five-fold increase in pressure. This strongly suggests that free radical homogeneous chain reactions are not significant in these processes and that they can be operated reliably above atmospheric pressure. For the synthesis of HCN over Pt-10% Rh gauzes, the selectivity to HCN can be maintained above 0.75 at pressures up to 5.5 atm. Selectivities to synthesis gas (CO and H₂) from a methane-air mixture over a Rh-coated foam monolith at pressures up to 5.5 atm were maintained above 0.90. Over a Pt-coated foam monolith, the selectivity to ethylene from ethane-air and ethane-O₂ mixtures was independent of pressure up to 6.5 atm and conversion rose slightly although it was necessary to maintain constant velocity and residence time over the catalyst to avoid carbon formation.This research was supported by DOE under Grant No. DE-FG02-88ER13878.     

Anosognosia in parietal lobe syndrome

Patients with right parietal lesions often deny their paralysis (anosognosia), but do they have "tacit" knowledge of their paralysis? I devised three novel tests to explore this. First, the patients were given a choice between a bimanual task (e.g., tying shoe laces) vs a unimanual one (e.g., threading a bolt). They chose the former on 17 of 18 trials and, surprisingly, showed no frustration or learning despite repeated failed attempts. I conclude that they have no tacit knowledge of paralysis (or, if such knowledge exists, it is not available for this particular task). Second, I used a "virtual reality box" to convey the optical illusion to the patient that she was moving her paralyzed left hand up and down to the rhythm of a metronome, and yet she showed no sign of surprise. Third, I irrigated patient BM's left ear canal with cold water, a procedure that is known to shift that patient's spatial frame of reference by stimulating the vestibular system. Surprisingly, this allowed her "repressed" memory of the paralysis to come to the surface; she said she had been paralyzed continuously for several days. I suggest that the vestibular stimulation produces these remarkable effects by mimicking REM sleep. These patients also employ a whole arsenal of grossly exaggerated Freudian "defense mechanisms" to account for their paralysis. To explain this, I propose that in normal individuals the left hemisphere ordinarily deals with small, local anomalies by trying to impose consistency but, when the anomaly exceeds threshold, an interaction with the right hemisphere forces a "paradigm shift." A failure of this process, in patients with right hemisphere damage, might partially account for anosognosia. Finally, I present a new conceptual framework that may help link several psychological and neurological phenomena such as Freudian defense mechanisms, vestibular stimulation, anosognosia, memory repression, visual illusions, anterograde amnesia, REM sleep, dreaming, and humor.     

Adaptive Window Based 3-D Feature Selection for Multispectral Image Classification Using Firefly Algorithm

Feature extraction is the most critical step in classification of multispectral image. The classification accuracy is mainly influenced by the feature sets that are selected to classify the image. In the past, handcrafted feature sets are used which are not adaptive for different image domains. To overcome this, an evolutionary learning method is developed to automatically learn the spatial-spectral features for classification. A modified Firefly Algorithm (FA) which achieves maximum classification accuracy with reduced size of feature set is proposed to gain the interest of feature selection for this purpose. For extracting the most efficient features from the data set, we have used 3-D discrete wavelet transform which decompose the multispectral image in all three dimensions. For selecting spatial and spectral features we have studied three different approaches namely overlapping window (OW-3DFS), non-overlapping window (NW-3DFS) adaptive window cube (AW-3DFS) and Pixel based technique. Fivefold Multiclass Support Vector Machine (MSVM) is used for classification purpose. Experiments conducted on Madurai LISS IV multispectral image exploited that the adaptive window approach is used to increase the classification accuracy.     

ArRaNER: A novel named entity recognition model for biomedical literature documents

Developments in advanced innovations have prompted the generation of an immense amount of digital information. The data deluge contains hidden information that is difficult to extract. In the biomedical domain, the development of technology has caused the production of voluminous data. Processing these voluminous textual data is referred to as ‘biomedical content mining’. Emerging artificial intelligence (AI) models play a major role in the automation of Pharma 4.0. In AI, natural language processing (NLP) plays a dynamic role in extracting knowledge from biomedical documents. Research articles published by scientists and researchers contain an enormous amount of hidden information. Most of the original and peer-reviewed articles are indexed in PubMed. Extracting meaningful information from a large number of literature documents is very difficult for human beings. This research aims to extract the named entities of literature documents available in the life science domain. A high-level architecture is proposed along with a novel named entity recognition (NER) model. The model is built using rule-based machine learning (ML). The proposed ArRaNER model produced better accuracy and was also able to identify more entities. The NER model was tested on two different datasets: a PubMed dataset and a Wikipedia talk dataset. The ArRaNER model obtains an accuracy of 83.42% on the PubMed articles and 77.65% on the Wikipedia articles.

     

Extranasal Staphylococcus aureus colonization predisposes to bloodstream infections in patients on hemodialysis with noncuffed internal jugular vein catheters

Introduction: Staphylococcal infection of endogenous origin is an important cause of morbidity and mortality in patients who receive hemodialysis (HD). The risk of such infections in nasal carriers of the organism is well defined. Extranasal carriage of the organism at extranasal sites may pose similar risks. Methods: A total of 70 patients about to undergo internal jugular vein catheterization for HD were enrolled in this prospective observational study. Swab cultures were obtained from anterior nares, posterior pharynx, axillae, toe web spaces, and vascular access sites at baseline and 1 week later. A patient was defined as a persistent carrier when the same organism was grown in both samples. Staphylococcus aureus bloodstream infections were assessed by blood and catheter tip cultures over a 90‐day period. Findings: The mean age of the patients was 43.71 ± 16.2 years. Persistent S. aureus carriage at anterior nares, throat, axilla, toe web spaces, vascular access site, and all sites was documented in 27.9%, 11.4%, 40%, 32.9%, 4.3%, and 64.2% of patients, respectively. Fifteen patients developed S. aureus infections. Catheter related S. aureus infections (CRI) were more likely in persistent carriers than nonpersistent carriers with odds ratios (95% CI) of 10.2 (2.8–37.1), 8.6 (1.7–42.2), 17.3 (3.4–86.0), 3.0 (0.9–9.8), and 1.9 (0.2–22.4) for anterior nares, throat, axilla, toe web spaces, and vascular access site carriers, respectively. The probability of developing CRI in persistent S. aureus carriers was 55% compared to none in noncarriers at 90 days (P = 0.04). Discussion: Extranasal S. aureus carriage is as significant a risk factor as nasal carriage for staphylococcal infections in patients on HD through catheters. The study is limited by lack of molecular phenotyping.     

Mesoporous titanium dioxide nanocatalyst: a recyclable approach for one‐pot synthesis of 5‐hydroxymethylfurfural

The present study deals with the production of 5‐hydroxymethyl furfural (HMF) from fructose by chemo‐conversion method using chemical catalyst, conventionally achieved by microwave‐assisted dehydration process. Five different chemical catalysts, namely oxalic acid, phosphotungstic acid and mesoporous titanium dioxide nanoparticles (TNPs) were compared at constant conditions of which TNPs yielded a maxima of 33.95%. The optimum temperature and catalyst loading were found to be 200°C and 20%, respectively, at a 5% optimum substrate concentration during 15 min optimum reaction time to yield 61.53% HMF. The efficiency of synthesised TNPs was investigated further through reusability studies. TNPs were properly recycled and the catalytic activity recovery was good even after a 14 batch reactions. The specific surface area of the TNP obtained is about 105.46 m² /g and its pore‐volume is about 0.42 cm³ /g according to single point adsorption. A large accessible surface area combined with a minimal pore size (15.92 nm) obtained with mesoporous TNPs is desirable for better catalyst loading, high‐yield HMF, retention and reduced diffusion constraints.Inspec keywords: mesoporous materials, recycling, production management, dissociation, nanoparticles, nanotechnologyOther keywords: mesoporous titanium dioxide nanocatalyst, recyclable approach, one‐pot synthesis, 5‐hydroxymethyl furfural production, HMF, chemo‐conversion method, chemical catalyst, microwave‐assisted dehydration process, oxalic acid, phosphotungstic acid, mesoporous titanium dioxide nanoparticles, TNP     

Effects of soil composition and mineralogy on remote sensing of crop residue cover

The management of crop residues (non-photosynthetic vegetation) in agricultural fields influences soil erosion and soil carbon sequestration. Remote sensing methods can efficiently assess crop residue cover and related tillage intensity over many fields in a region. Although the reflectance spectra of soils and crop residues are often similar in the visible, near infrared, and the lower part of the shortwave infrared (400-1900 nm) wavelength region, specific diagnostic chemical absorption features are evident in the upper shortwave infrared (1900-2500 nm) region. Two reflectance band height indices used for estimating residue cover are the Cellulose Absorption Index (CAI) and the Lignin-Cellulose Absorption (LCA) index, both of which use reflectances in the upper shortwave infrared (SWIR). Soil mineralogy and composition will affect soil spectral properties and may limit the usefulness of these spectral indices in certain areas. Our objectives were to (1) identify minerals and soil components with absorption features in the 2000 nm to 2400 nm wavelength region that would affect CAI and LCA and (2) assess their potential impact on remote sensing estimates of crop residue cover. Most common soil minerals had CAI values ≤ 0.5, whereas crop residues were always > 0.5, allowing for good contrast between soils and residues. However, a number of common soil minerals had LCA values > 0.5, and, in some cases, the mineral LCA values were greater than those of the crop residues, which could limit the effectiveness of LCA for residue cover estimation. The LCA of some dry residues and live corn canopies were similar in value, unlike CAI. Thus, the Normalized Difference Vegetation Index (NDVI) or similar method should be used to separate out green vegetation pixels. Mineral groups, such as garnets and chlorites, often have wide ranges of CAI and LCA values, and thus, mineralogical analyses often do not identify individual mineral species required for precise CAI estimation. However, these methods are still useful for identifying mineral soils requiring additional scrutiny. Future advanced multi- and hyperspectral remote sensing platforms should include CAI bands to allow for crop residue cover estimation.     

Fault diagnosis of spur bevel gear box using discrete wavelet features and Decision Tree classification

The wavelet transform (WT) is used to represent all possible types of transients in vibration signals generated by faults in a gear box. It is shown that the transform provides a powerful tool for condition monitoring and fault diagnosis. The vibration signal of a spur bevel gear box in different conditions is used to demonstrate the application of various wavelets in feature extraction. In present work, a discrete wavelet, Daubechies wavelets (db1–db15) is used for feature extraction and their relative effectiveness in feature extraction is compared. The major steps in pattern classification are feature extraction and classification. This paper investigates the use of discrete wavelets for feature extraction and a Decision Tree for classification. J48 Decision Tree algorithm has been used for feature selection as well as for classification. This paper illustrates the powerfulness and flexibility of the discrete wavelet transform to decompose linear and non-linear processing of vibration signal.