An extensible and lightweight architecture for adaptive server applications

Server applications augmented with behavioral adaptation logic can react to environmental changes, creating self‐managing server applications with improved quality of service at runtime. However, developing adaptive server applications is challenging due to the complexity of the underlying server technologies and highly dynamic application environments. This paper presents an architecture framework, the Adaptive Server Framework (ASF), to facilitate the development of adaptive behavior for legacy server applications. ASF provides a clear separation between the implementation of adaptive behavior and the business logic of the server application. This means a server application can be extended with programmable adaptive features through the definition and implementation of control components defined in ASF. Furthermore, ASF is a lightweight architecture in that it incurs low CPU overhead and memory usage. We demonstrate the effectiveness of ASF through a case study, in which a server application dynamically determines the resolution and quality to scale an image based on the load of the server and network connection speed. The experimental evaluation demonstrates the performance gains possible by adaptive behavior and the low overhead introduced by ASF. Copyright © 2007 John Wiley & Sons, Ltd.     

Cyclic voltammetry on electrode surfaces covered with porous layers: An analysis of electron transfer kinetics at single-walled carbon nanotube modified electrodes

Cyclic voltammetry is recorded of the oxidation of ferrocyanide on a glassy carbon electrode modified with multiple layers of single-walled carbon nanotubes. The current response is interpreted in terms of semi-infinite planar diffusion towards the macro-electrode surface and in terms of oxidation of the electroactive species trapped in pockets in between the nanotubes. A thin layer model is used to illustrate the effects of diffusion within a porous layer. It is found that a semi-infinite planar diffusion model alone is not appropriate for interpreting the kinetics of the electron transfer at this electrode surface. In particular, caution should be exercised in respect of comparing voltammetric peak-to-peak potential separations between naked electrodes and nanotube-modified electrodes for the inference of electrocatalysis via electron transfer via the nanotubes.     

Minimal ordering constraints for some families of variable symmetries

Variable symmetries in a constraint satisfaction problem can be broken by adding lexicographic ordering constraints. Existing general methods of generating such sets of ordering constraints can require a huge number of constraints. This adds an unacceptable overhead to the solving process. Methods exist by which this large set of ordering constraints can be reduced to a much smaller set automatically, but their application is also prohibitively costly. In contrast, this paper takes a bottom-up approach. It examines some commonly-occurring families of groups and derives a minimal set of ordering constraints sufficient to break the symmetry each group describes. These minimal sets are then used as building blocks to generate minimal sets of ordering constraints for groups constructed via direct and imprimitive wreath products. Experimental results confirm the value of minimal sets of ordering constraints, which can now be generated much more cheaply than with previous methods.     

Configuring and enhancing measurement systems for damage identification

Engineers often decide to measure structures upon signs of damage to determine its extent and its location. Measurement locations, sensor types and numbers of sensors are selected based on judgment and experience. Rational and systematic methods for evaluating structural performance can help make better decisions. This paper proposes strategies for supporting two measurement tasks related to structural health monitoring - (1) installing an initial measurement system and (2) enhancing measurement systems for subsequent measurements once data interpretation has occurred. The strategies are based on previous research into system identification using multiple models. A global optimization approach is used to design the initial measurement system. Then a greedy strategy is used to select measurement locations with maximum entropy among candidate model predictions. Two bridges are used to illustrate the proposed methodology. First, a railway truss bridge in Zangenberg, Germany, is examined. For illustration purposes, the model space is reduced by assuming only a few types of possible damage in the truss bridge. The approach is then applied to the Schwandbach bridge in Switzerland, where a broad set of damage scenarios is evaluated. For the truss bridge, the approach correctly identifies the damage that represents the behaviour of the structure. For the Schwandbach bridge, the approach is able to significantly reduce the number of candidate models. Values of candidate model parameters are also useful for planning inspection and eventual repair.     

Inertial microfluidics for continuous particle filtration and extraction

In this paper, we describe a simple passive microfluidic device with rectangular microchannel geometry for continuous particle filtration. The design takes advantage of preferential migration of particles in rectangular microchannels based on shear-induced inertial lift forces. These dominant inertial forces cause particles to move laterally and occupy equilibrium positions along the longer vertical microchannel walls. Using this principle, we demonstrate extraction of 590 nm particles from a mixture of 1.9 μm and 590 nm particles in a straight microfluidic channel with rectangular cross-section. Based on the theoretical analysis and experimental data, we describe conditions required for predicting the onset of particle equilibration in square and rectangular microchannels. The microfluidic channel design has a simple planar structure and can be easily integrated with on-chip microfluidic components for filtration and extraction of wide range of particle sizes. The ability to continuously and differentially equilibrate particles of different size without external forces in microchannels is expected to have numerous applications in filtration, cytometry, and bioseparations.     

Aberrant protein expression in plasma and kidney tissue during experimental obstructive nephropathy

Kidney failure is a major health problem worldwide. Patients with end-stage renal disease require intensive medical support by dialysis or kidney transplantation. Current methods for diagnosis of kidney disease are either invasive or insensitive, and renal function may decline by as much as 50% before it can be detected using current techniques. The goal of this study was, therefore, to identify biomarkers of kidney disease (associated with renal fibrosis) that can be used for the development of a non-invasive clinical test for early disease detection. We utilized two protein-profiling technologies (SELDI-TOF MS and 2-D) to screen the plasma and kidney proteome for aberrantly expressed proteins in an experimental mouse model of unilateral uretric obstruction, which mimics the pathology of human renal disease. Several differentially regulated proteins were detected at the plasma level of day-3-obstructed animals, which included serum amyloid A1, fibrinogen α, haptoglobin precursor protein, haptoglobin and major urinary proteins 11 and 8. Differentially expressed proteins detected at the tissue level included ras-like activator protein 2, haptoglobin precursor protein, malate dehydrogenase, α enolase and murine urinary protein (all p<0.05 versus controls). Immunohistochemistry was used to confirm the up-regulation of fibrinogen. Interestingly, these proteins are largely separated into four major classes: (i) acute-phase reactants (ii) cell-signaling molecules (iii) molecules involved in cell growth and metabolism and (iv) urinary proteins. These results provide new insights into the pathology of obstructive nephropathy and may facilitate the development of specific assay(s) to detect and monitor renal fibrosis.     

Up in smoke: I. Smoke-derived germination cues for postfire annual,Nicotiana attenuata torr. Ex. Watson

Some postfire annuals with dormant seeds use heat or chemical cues from charred wood to synchronize their germination with the postfire environment. We report that wood smoke and polar extracts of wood smoke, but not the ash of burned wood, contain potent cue(s) that stimulate germination in the postfire annual plant,Nicotiana attenuata. We examined the responses of seeds from six populations of plants from southwest Utah to extracts of smoke and found the proportion of viable seeds that germinated in the presence of smoke cues to vary between populations but to be consistent between generations. With the most dormant genotypes, we examine three mechanisms by which smoke-derived chemical cues may stimulate germination (chemical scarification of the seed coat and nutritive- and signal-mediated stimulation of germination) and report that the response is consistent with the signal-mediated mechanism. The germination cue(s) found in smoke are produced by the burning of hay, hardwood branches, leaves, and, to a lesser degree, cellulose. Moreover, the cues are found in the common food condiment, liquid smoke, and we find no significant differences between brands. With a bioassay-driven fractionation of liquid smoke, we identified 71 compounds in active fractions by GC-MS and AA spectrometry. However, when these compounds were tested in pure form or in combinations that mimicked the composition of active fractions over a range of concentrations, they failed to stimulate germination to the same degree that smoke fractions did. Moreover, enzymatic oxidation of some of these compounds also failed to stimulate germination. In addition, we tested 43 additional compounds also reported from smoke, 85 compounds that were structurally similar to those reported from smoke and 34 compounds reported to influence germination in other species. Of the 233 compounds tested, 16 proved to inhibit germination at the concentrations tested, and none reproduced the activity of wood smoke. By thermally desorbing smoke produced by cellulose combustions that was trapped on Chromosorb 101, we demonstrate that the cue is desorbed between 125 and 150°C. We estimate that the germination cues are active at concentrations of less than 1 pg/seed and, due to their chromatographic behavior, infer that a number of different chemical structures are active. In separate experiments, we demonstrate that cues remain active for at least 53 days in soil under greenhouse conditions and that the application of aqucous extracts of smoke to soil containing seeds results in dramatic increases in germination of artificial seed banks. Hence, although the chemical nature of the germination cue remains elusive, the stability of the germination cues, their water-solubility, and their activity in low concentrations suggest that these cues could serve as powerful tools for the examination of dormant seed banks and the selective factors thought to be important in the evolution of postfire plant communities.     

Fabricating Strong and Stiff Bioplastics from Whole Spirulina Cells

Since the 1950s, 8.3 billion tonnes (Bt) of virgin plastics have been produced, of which around 5 Bt have accumulated as waste in oceans and other natural environments, posing severe threats to entire ecosystems. The need for sustainable bio-based alternatives to traditional petroleum-derived plastics is evident. Bioplastics produced from unprocessed biological materials have thus far suffered from heterogeneous and non-cohesive morphologies, which lead to weak mechanical properties and lack of processability, hindering their industrial integration. Here, a fast, simple, and scalable process is presented to transform raw microalgae into a self-bonded, recyclable, and backyard-compostable bioplastic with attractive mechanical properties surpassing those of other biobased plastics such as thermoplastic starch. Upon hot-pressing, the abundant and photosynthetic algae spirulina forms cohesive bioplastics with flexural modulus and strength in the range 3–5 GPa and 25.5–57 MPa, respectively, depending on pre-processing conditions and the addition of nanofillers. The machinability of these bioplastics, along with self-extinguishing properties, make them promising candidates for consumer plastics. Mechanical recycling and fast biodegradation in soil are demonstrated as end-of-life options. Finally, the environmental impacts are discussed in terms of global warming potential, highlighting the benefits of using a carbon-negative feedstock such as spirulina to fabricate plastics.     

Selective toxicity of hydroxyl-rich carbon nanodots for cancer research

Nano Research - The toxicity of nanoparticles in a biological system is an integration of effects arising from surface functionality, particle size, ionic dissolution, etc. This complexity suggests...