Studying Fluid Characteristics Atop Surface Patterned Membranes via Particle Image Velocimetry

Surface patterning is a recent promising approach to promote performance of pressure-driven membranes in water treatment and desalination. Nevertheless, knowledge about foulant deposition mechanisms, especially at early stage of filtration, is still lacking. The applicability of particle imaging velocimetry to study fluid characteristics atop surface patterned thin-film composite membranes was investigated at different operating conditions. This work is an important first step toward reliable understanding of the impacts of topographical membrane surface modification on hydrodynamic conditions and foulant deposition mechanisms.     

Effects of axial circulation and dispersion geometry on the scale‐up of ultrasonic extraction of polysaccharides

The ultrasonic‐assisted extraction of polysaccharides (PS) from Ganoderma lucidum, was subjected to a scale‐up study. 0.25 L extractor was used to optimize the extraction conditions toward maximum yield of PS. The extracted PS was observed to be reduced by increasing the scale from 1 to 6 L. To intensify the extraction, axial circulation at different stirring rates was induced and optimized in a 3 L U‐tube extractor. Although circulation at 300 rpm improved the yield of PS for 3 L, introducing dispersion geometry (conical funnel) and adjusting the radiation distance in a 6 L U‐tube extractor further intensified the extraction efficiency. A radiation distance of 4 cm and circulation induced using 600 rpm enhanced the PS as compared to the conventional 6 L extractor. Overall, the scale‐up from 0.25 to 6 L was successful and introducing circulation and dispersion geometry intensified the extraction efficiency under similar dissipation of ultrasonic power. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1483–1491, 2015     

Production of Synthesis Gas via Dry Reforming of Methane over Co‐Based Catalysts: Effect on H2/CO Ratio and Carbon Deposition

The effect of support type on synthesis gas production using Co‐based catalysts supported over TiO₂‐P25, Al₂O₃, SiO₂, and CeO₂ was investigated. The catalysts were prepared by the incipient wet impregnation method and characterized by various techniques for comparison. Experiments were performed in a micro tubular reactor. The results revealed that all Co‐supported catalysts produced synthesis gas ratios of 1 and below and, thus, proved to be well‐suited for methanol and Fischer‐Tropsch syntheses. Co catalysts supported over TiO₂‐P25 and Al₂O₃ provided better synthesis gas ratios and stability performances. The promotion of a Co/TiO₂‐P25 catalyst with Ce had a substantial influence on its catalytic activity and the amount of carbon deposit. A Ce‐promoted catalyst diminished markedly the extent of carbon deposition and thus boosted the performance towards better activity and stability.     

Study of morphology and gas separation properties of polysulfone/titanium dioxide mixed matrix membranes

Polysulfone (PSf)‐based mixed matrix membranes (MMMs) with the incorporation of titanium dioxide (TiO₂) nanoparticles were prepared. Distribution and agglomeration of TiO₂ in polymer matrix and also surface of membranes were observed by scanning electron microscopy, transmission electron microscopy, and energy dispersive X‐ray. Variation in surface roughness of MMMs with different TiO₂ loadings was analyzed by atomic force microscopy. Physical properties of membranes before and after cross‐linking were identified through thermal gravimetric analysis. At low TiO₂ loadings (≤3 wt%), both CO₂ and CH₄ permeabilities decreased and consequently gas selectivity improved and reached to 36.5 at 3 bar pressure. Interestingly, PSf/TiO₂ 3 wt% membrane did not allow to CH₄ molecules to pass through the membrane and this sample just had CO₂ permeability at 1 bar pressure. Gas permeability increased considerably at high filler contents (≥5 wt%) and CO₂ permeance reached to 37.7 GPU for PSf/TiO₂ 7 wt% at 7 bar pressure. It was detected that, critical nanoparticle aggregation has occurred at higher filler loadings (≥5 wt%), which contributed to formation of macrovoids and defects in MMMs. Accordingly, MMMs with higher gas permeance and lower gas selectivity were prepared in higher TiO₂ contents (≥5 wt%). POLYM. ENG. SCI., 55:367–374, 2015. © 2014 Society of Plastics Engineers     

Thermal Evaluation of Diesel/Hydrogen Peroxide Fuel Blend

Thermal properties of fossil fuel are the key fundamental characteristics, which can distinguish any compound as a potential fuel. The performance of diesel fuel blend along with stability and solubility parameter designs are evaluated. The results from the experimental study indicate that the increase in hydrogen peroxide (H₂O₂) amount enhances the cetane number of diesel fuel blend significantly. However, the calorific value decreases as compared to pure diesel fuel. All values performed well according to the ASTM D‐975 diesel testing method. The thermodynamics of the prepared fuel blends also revealed that substantial solubility and diesel/H₂O₂ blend stability are provided even at lower temperatures. Such blends can be used as a feasible replacement of pure diesel fuel.     

Comparative study on the effect of various pretreatment methods on the enrichment of hydrogen producing bacteria in anaerobic granulated sludge from brewery wastewater

Five pretreatment methods, namely chemical, acid, heat-shock, freezing and thawing, and base, were evaluated for the enrichment of hydrogen-producing bacteria in anaerobic granulated sludge, which will be subsequently used as seed in biological hydrogen production. All the pretreatments showed positive effects towards improving hydrogen (H₂) generation by the microbial population with higher hydrogen production yield and COD removal efficiency as compared to control. The granulated sludge pretreated by heat-shock showed maximum accumulated H₂ (19.48mLg^?1-COD), COD removal efficiency (62%), and biomass concentration (22.5 gL^?1).     

Dietary Supplementation of Tetracarpidium conophorum (African Walnut) Seed Enhances Muscle n‐3 Fatty Acids in Broiler Chickens

The influence of dietary Tetracarpidium conophorum (African Walnut) seed meal (TCSM) on fatty acids, productivity parameters, and physicochemical properties of breast and thigh muscles in broiler chickens are assessed. A total of 180, 28‐d‐old Arbor acre broiler chickens are randomly assigned to dietary treatments containing 0% (control), 2.5%, and 5% w/w TCSM, fed for 28 d, and euthanized. Dietary TCSM reduces (p < 0.05) feed intake, body weight gain (BWG), carcass weight, and abdominal fat. Diet does not affect feed efficiency and hematological parameters. The control birds have higher (p < 0.05) serum total cholesterol and triglycerides than do the supplemented birds. Diet has no effect on pH, water holding capacity, carbonyl and malondialdehyde contents, and organoleptic properties of breast and thigh muscles. The 5% TCSM has higher redness in breast muscle than do other treatments. Dietary TCSM improves (p < 0.05) the concentration of C18:3n‐3 (4.80–8.76% vs 1.56%), C20:5n‐3 (0.54–0.79% vs 0.39%), C22:5n‐3 (0.64–0.89% vs 0.18%), and C22:6n‐3 (0.75–0.97% vs 0.19%), and reduces (p <  0.05) the fat content (2.15–2.45% vs 3.15%) in breast and thigh muscles. Dietary TCSM enhances muscle n‐3 fatty acids without instigating oxidative deterioration, but reduces BWG in broiler chickens. Practical Application: Albeit that broiler meat is rich in polyunsaturated fatty acids (PUFA), its omega 6 (n‐6)/omega 3 (n‐3) is >4. Elevated n‐6/n‐3 could have adverse effect on human physiology thereby promoting the pathogenesis of certain diseases. This heightens the need to enhance the n‐3 PUFA content of broiler meat. Dietary TCSM induced up to a fourfold increase in n‐3 PUFA content of the breast and thigh muscles in broiler chickens. Moreover, dietary TCSM induced up to a tenfold decrease in the n‐6/n‐3 of the breast and thigh muscles in broiler chickens. This finding assumes great significance because the health concerns regarding dietary fat are the foremost factors responsible for the bad image suffered by meat. These results provide insights on the potential of TCSM to improve the nutritional quality without compromising the oxidative shelf life, organoleptic traits, and physicochemical properties of broiler meat.     

Fractional Order GN Model on Photo-Thermal Interaction in a Semiconductor Plane

A mathematical model of Green–Naghdi photothermal theory based on fractional-order of heat transfer is given to study the wave propagation in a two-d     

Processing of an East Mediterranean phosphate ore sample by an integrated attrition scrubbing/classification scheme (part one)

ABSTRACT

In this study, an Egyptian siliceous/calcareous sedimentary phosphorite was subjected to beneficiation by unsophisticated economic means. The mineralogical and chemical examination showed that the ore sample is a typical example for the East Mediterranean phosphorites with 21.80% P₂O₅, 10.93% acid insoluble and 16.61% loss on ignition. The primary crushed sample was classified into three size fractions without any milling and they were separately subjected to an integrated attrition scrubbing study. Screening and classification on the 2.30 mm and 0.071 mm sieves were sequentially introduced with the attrition process. The effect of solid%, attrition speed and time were studied and optimized for each size fraction. Results showed that three products were produced and could be categorized according to their P₂O₅ content into the coarse tailing (+2.30 mm), the attrition concentrate (?2.30 + 0.071 mm) and the phosphate fines (?0.071 mm). The P₂O₅ contents of these products reached 12.24%, 28.72% and 18.77%, with P₂O₅ distribution reached 6.74%, 51.75% and 41.51%, respectively. A global P₂O₅ of 28.72% was obtained with a recovery of about 52%. A tentative flow-sheet for the whole process was postulated.     

Degradability Enhancement of Poly(Lactic Acid) by Stearate-Zn(3)Al LDH Nanolayers

Recent environmental problems and societal concerns associated with the disposal of petroleum based plastics throughout the world have triggered renewed efforts to develop new biodegradable products compatible with our environment. This article describes the preparation, characterization and biodegradation study of poly(lactic acid)/layered double hydroxide (PLA/LDH) nanocomposites from PLA and stearate-Zn₃Al LDH. A solution casting method was used to prepare PLA/stearate-Zn₃Al LDH nanocomposites. The anionic clay Zn₃Al LDH was firstly prepared by co-precipitation method from a nitrate salt solution at pH 7.0 and then modified by stearate anions through an ion exchange reaction. This modification increased the basal spacing of the synthetic clay from 8.83 Å to 40.10 Å. The morphology and properties of the prepared PLA/stearate-Zn₃Al LDH nanocomposites were studied by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), thermogravimetric analysis (TGA), tensile tests as well as biodegradation studies. From the XRD analysis and TEM observation, the stearate-Zn₃Al LDH lost its ordered stacking-structure and was greatly exfoliated in the PLA matrix. Tensile test results of PLA/stearate-Zn₃Al LDH nanocomposites showed that the presence of around 1.0–3.0 wt % of the stearate-Zn₃Al LDH in the PLA drastically improved its elongation at break. The biodegradation studies demonstrated a significant biodegradation rate improvement of PLA in the presence of stearate-Zn₃Al LDH nanolayers. This effect can be caused by the catalytic role of the stearate groups in the biodegradation mechanism leading to much faster disintegration of nanocomposites than pure PLA.