Essential fatty acids in trout serum lipoproteins,vitellogenin and egg lipids

This paper describes evidence of (n−3) and particularly of 22∶6 (n−3) fatty acid enrichment in trout lipoproteins as well as in vitellogenin, egg lipovitellin and oil globule. Among the lipoproteins, HDL and LDL were the main forms of blood lipid transport, whereas phospholipids and cholesteryl esters are the preferential chemical carriers for (n−3) fatty acid transport. However, cholesteryl esters were less important as esterified fatty acid carriers than in man. Taken together with the data obtained in mammals, our results suggest that there may be a relationship between EFA activity and the distribution of the EFA among the lipoprotein lipid fractions in vertebrates, irrespective of the EFA series. Administration of an (n−3) fatty acid deficient diet for three months prior to trout spawning produced a significant increase in egg lipid content, primarily as a result of the increase of the oil globule composed almost exclusively of triacylglycerols. This diet decreased the 22∶6 (n−3), as well as the (n−3) fatty acid contents of lipoproteins, lipovitellin, vitellogenin and the oil globule. In contrast, the (n−3) fatty acid level was always higher in lipoproteins and lipovitellin than in the vitellogenin and the oil globule. Moreover, the relative levels of 22∶6 (n−3) and total (n−3) fatty acids were quite similar in lipoproteins and lipovitellin on the one hand, and in vitellogenin and the oil globule on the other. These findings suggest a direct relationship between the two forms of plasma lipid transport and the two egg compartments. During ovogenesis, dietary lipids seemed to be diverted from the adipose tissue and essentially deposited in the egg.     

Synthetic absorbent for dyestuffs based on gamma crosslinked poly(vinyl alcohol) (PVA)

This work reports on the characterization and uses of gamma radiation‐crosslinked poly(vinyl alcohol) (PVA) films as absorbents for different classes of dyestuffs normally released from textile factors. Dyestuffs were selected from different producers. These dyestuffs were Remacryl Blue (basic dye), Remazol Golden Orange (reactive dye), Solar Orange (direct dye), and Sandolan (acid dye). The percentage dye sorption by PVA was determined by spectroscopic analysis and color‐strength measurements of the PVA films after absorbing the different dyestuffs. The results showed that the concentration of dimethylbisacrylamide as a crosslinking agent has a great effect on the gel fraction and percentage swelling in water of the PVA polymer. In general, crosslinked PVA showed a low tendency to absorb the different dyestuffs under investigation at room temperature. This tendency was shown to increase with an increasing temperature of the dye solution from room temperature to 70°C. Meanwhile, the highest percentage of dye sorption was found in the case of the basic dye and the lowest one in the case of the reactive dye depending on the active groups on the dyes. Moreover, the percentage dye sorption by PVA was slightly higher in the acid medium rather than in the alkaline one. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 349–354, 2003     

Hydrodynamics of gas fluidized beds with mixture of group D and B particles

The dynamics of a gas‐solid fluidized bed containing Geldart Group D particles mixed with a small proportion of Geldart Group B particles are investigated using pressure fluctuations data. Time series analysis, using a variety of nonlinear dynamics tools, shows that the slugging present with Group D particles can be suppressed by the addition of a small proportion of Group B particles. The power spectra and the auto‐correlation function are used for a preliminary evaluation of dominant slug frequencies. It is shown that the bed fluidized with the mixture of Group D and B particles behaves in a less periodic manner and is dominated by more random bubble motion. On the other hand, the correlation integral is used to analyze the chaotic behaviour of the flow, through evaluation of the fractal structure of the reconstructed attractors. It is shown that the bed fluidized with Group D particles is characterized by a combination of steady slug motion and irregular particles motion. The behaviour of the fluidized bed of Group D/B particles mixture is characterized by a single correlation dimension for a wide range of fluidization velocities.     

Genetic algorithm-based initial contour optimization for skin lesion border detection

Multimedia Tools and Applications - Automated segmentation has an essential role in detecting several diseases, such as skin lesions. In segmentation, the active contour (AC) is an efficient method...     

Optimization of demand-related packaging sizes using a p-median approach

The determining of efficient packaging sizes is a key factor in saving material and transportation costs and also in reducing packaging waste. By analyzing the range of items and their contribution to sales-relevant order structures of a globally operating mail order company, a simplified packing algorithm is proposed. In combination with well-known methodologies, this heuristic provides near optimal solutions improving current packaging of eCommerce companies. It is shown that simple, practical heuristics are sufficient to achieve average material savings of more than 10 %. In order to find efficient packaging sizes, a set of them is generated by discretization of packaging dimensions. Given the set of orders and the set of packaging sizes, a p-median approach is applied to find a specified number of optimal, demand-related packaging sizes.     

Studying Fluid Characteristics Atop Surface Patterned Membranes via Particle Image Velocimetry

Surface patterning is a recent promising approach to promote performance of pressure-driven membranes in water treatment and desalination. Nevertheless, knowledge about foulant deposition mechanisms, especially at early stage of filtration, is still lacking. The applicability of particle imaging velocimetry to study fluid characteristics atop surface patterned thin-film composite membranes was investigated at different operating conditions. This work is an important first step toward reliable understanding of the impacts of topographical membrane surface modification on hydrodynamic conditions and foulant deposition mechanisms.     

Surface Modification of Ready-to-Use Hollow Fiber Ultrafiltration Modules for Oil/Water Separation

Reusing wastewater from oil-related industries is becoming increasingly important, especially in water-stressed oil-producing countries. Before oily wastewater can be discharged or reused, it must be properly treated, e.g., by membrane-based processes like ultrafiltration. A major issue of the applied membranes is their high fouling propensity. This paper reports on mitigating fouling inside ready-to-use ultrafiltration hollow-fiber modules used in a polishing step in oil/water separation. For this purpose, in-situ polyzwitterionic hydrogel coating was applied. The membrane performance was tested with oil nano-emulsions using a mini-plant system. The main factors influencing fouling were systematically investigated using statistical design of experiments.     

Radiation crosslinking of linear polyethyleneimine-based nanoparticles grafted to poly(glycidyl methacrylate) via trimethylolpropane triacrylate as potential electronic packaging material

Linear polyethyleneimine (L-PEI)-based nanoparticles were synthesized via hydrolysis of poly-2-methyl-2-oxazoline (PMeOx), which was prepared by cationic ring-opening polymerization of the oxazoline five-membered ring. Herein, a kinetic study of the ring-opening polymerization reaction is discussed. The nuclear magnetic resonance spectrum of PMeOx verified the presence of repeating units and terminal groups in the polymer's structure. Molar ratios of PEI and PMeOx were characterized using size exclusion chromatography with low-polydispersity polymer chains as the controlled polymerization reaction. PEI and PMeOx exhibited narrow particle size distribution with hydrodynamic radii of 89 and 67 nm, respectively, as determined via dynamic light scattering analysis. In addition, atomic forces and scanning electron microscopy were used to investigate the topography of the PEI thin films. Poly(glycidyl methacrylate) P(GMA) was grafted onto a PEI chain in the presence of trimethylolpropane triacrylate (TMPTA) as the crosslinking agent to synthesize the P(GMA–PEI–TMPTA) tripolymer via free radical polymerization using gamma irradiation. The thermal characterization of the P(GMA–PEI–TMPTA) tripolymer was conducted using thermogravimetric analysis and differential scanning calorimeter. Generally, the thermal stability of the P(GMA–PEI–TMPTA) tripolymer was improved at low-glycidyl methacrylate concentrations. The prepared tripolymer could be used as effective packaging materials for electronics industries.     

Graphene oxide-containing isocyanate-based polyimide foams: Enhanced thermal stability and flame retardancy

Isocyanate-based graphene oxide-containing polyimide foams were synthesized by a semi-prepolymer method. In this method, while the first solution containing pre-polymer was derived from pyromellitic dianhydride and excess polymethylene polyphenylene isocyanate (PM200), the second solution contains dianhydride derivatives, water, catalysts, surfactants, and graphene oxide. PIFs were prepared with 0%, 0.25%, 0.50%, 0.75%, and 1% graphene oxide by weight, respectively. PIFs exhibited a minimum side reaction and urea generation was not seen for all PIFs instead of imide bonding. The addition of graphene oxide (GO) leads to a more close-packed structure. Therefore, crosslinking density and thermal stability of graphene oxide-containing polyimide foams increased. Upon the addition of 1% GO, almost seven times higher compression strength was obtained compared to neat PIFs. Also, LOI values supported the theory that thermally stable and flame retardant PIFs can be synthesized via the isocyanate-based process with GO.