Enhanced surface morphologies of screen-printed carbon nanotube films by heat treatment and their field-emission properties

A heating process for obtaining free-standing carbon nanotube emitters is presented with the aim of improving field-emission properties from the screen-printed multiwalled carbon nanotube (MWCNT) films. Using an atmosphere with an optimum combination of nitrogen and air for heat treatment of CNT films, the CNT emitters can be made to protrude from the surface. This allows for a high emission current and the formation of very uniform emission sites without special surface treatment. The morphological change of the CNT film by this technique has eliminated additional processing steps, such as surface treatment which may result in secondary contamination and damage to the film. Despite its simplicity the process provides a high reproducibility in emission current density which makes the films suitable for practical applications.     

Microwave Dielectric Properties and Low-Temperature Cofiring of BaTe4O9 with Aluminum Metal Electrode

Polycrystalline BaTe₄O₉ ceramic compound was investigated as a promising microwave dielectric compound for low-temperature cofired ceramics (LTCC) applications. The binary phase BaTe₄O₉ was synthesized and subsequently densified over the temperature range of only 500°–550°C, which allows for low-temperature cofiring with aluminum metal. The dielectric properties of BaTe₄O₉ ceramics sintered at 550°C for 2 h were determined in the microwave region of 12–14 GHz. The dielectric constant and Q × f product obtained were 17.5 and 54 700 GHz at 12 GHz, respectively. The temperature coefficient of resonance frequency showed a negative value of −90 ppm/°C. In terms of its evaluation for LTCC, the BaTe₄O₉ composition was found to be chemically compatible and successfully cofired with highly conductive aluminum electrode, while maintaining good electrical performance.     

A visual study on flame behavior in tone-excited non-premixed jet flames

A visualization study on the effect of forcing amplitude in tone-excited jet diffusion flames has been conducted. Visualization techniques are employed using optical schemes, which are a light scattering photography. Flame stability curve is attained according to Reynolds number and forcing amplitude at a fuel tube resonant frequency. Flame behavior is globally grouped into two from attached flame to blown-out flame according to forcing amplitude; one sticks the tradition flame behavior which has been observed in general jet diffusion flames and the other shows a variety of flame modes such as the flame of a feeble forcing amplitude where traditionally well-organized vortex motion evolves, a fat flame, an elongated flame, and an in-burning flame. Particular attention is focused on an elongation flame, which is associated with a turnabout phenomenon of vortex motion, and on a reversal of the direction of vortex roll-up. It is found that the flame length with forcing amplitude is the direct outcome of the evolution process of the formed inner flow structure. Especially the negative part of the acoustic cycle under the influence of a strong positive pressure gradient causes the shapes of the fuel stem and fuel branch part and even the direction of vortex roll-up to dramatically change.     

Living cationic polymerization of isobutyl vinyl ether (II): Photoinduced living cationic polymerization in a mixed solvent of toluene and diethyl ether

A new method of preparation of living cationic polymer of isobutyl vinyl ether via photoinduced polymerization in the presence of diphenyliodonium iodide (DPII, initiator) and zinc iodide in a mixed solvent of toluene/diethyl ether, which was irradiated at ?78°C for short period, was completed within 15 min. The reaction was allowed for further reaction in the dark until monomer was fully consumed. It was found that increase in the conversion of monomer to polymer during the irradiation is very limited. Confirmation of the linear dependence of number‐average molar mass of resulting polymer on % conversion together with the fact that polymerization proceeds until monomer consumption, and controllability of number‐average molar mass of resulting polymer, depending on the molar ratio of monomer and initiator, strongly suggests the living nature of this polymerization, unless reaction temperature becomes higher than 0°C, i.e., the absence of chain breaking process. The narrow molar mass distribution, whose polydispersity index values are less than 1.2, reveals that the rate of initiation where irradiation is usually completed within 15 min is much faster than that of propagation in cationic nature in this system. Effect of some major factors, such as solvent polarity and temperature, on the living nature of the polymerization was also investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3581–3586, 2006     

Editing and Synthesizing Two‐Character Motions using a Coupled Inverted Pendulum Model

This study aims to develop a controller for use in the online simulation of two interacting characters. This controller is capable of generalizing two sets of interaction motions of the two characters based on the relationships between the characters. The controller can exhibit similar motions to a captured human motion while reacting in a natural way to the opponent character in real time. To achieve this, we propose a new type of physical model called a coupled inverted pendulum on carts that comprises two inverted pendulum on a cart models, one for each individual, which are coupled by a relationship model. The proposed framework is divided into two steps: motion analysis and motion synthesis. Motion analysis is an offline preprocessing step, which optimizes the control parameters to move the proposed model along a motion capture trajectory of two interacting humans. The optimization procedure generates a coupled pendulum trajectory which represents the relationship between two characters for each frame, and is used as a reference in the synthesis step. In the motion synthesis step, a new coupled pendulum trajectory is planned reflecting the effects of the physical interaction, and the captured reference motions are edited based on the planned trajectory produced by the coupled pendulum trajectory generator. To validate the proposed framework, we used a motion capture data set showing two people performing kickboxing. The proposed controller is able to generalize the behaviors of two humans to different situations such as different speeds and turning speeds in a realistic way in real time.     

Microstructural Evidence for Diffusion-Driven Tetragonal-to-Orthorhombic Phase Transformation in Y-Ba-Cu-O Superconductor

Microstructures of Y-Ba-Cu-O superconductor were observed using a polarized microscope. Orthorhombic and tetragonal phases were easily distinguished by the optical etching with cross-polarized light. In the specimen cooled rapidly in oxygen, it was possible to see the path of oxygen diffusion by observing the variation of the twin concentration. At the boundary between transformed and untransformed materials, evidence for diffusion-driven transformation could be clearly seen.     

Permeability characteristics of carbonated concrete considering capillary pore structure

During carbonation process, the calcium phases present in cement are attacked by CO₂ and converted into CaCO₃ and the permeability of concrete is changing due to the change in porosity. The rate of carbonation depends upon porosity and moisture content of the concrete. Especially in underground reinforced concrete structures, the interior portion of concrete surface may be exposed to carbonation and the exterior portion of concrete surface exposed to wet soil or underground water. As carbonation proceeds from outer surface into internal portion of concrete, microstructure is also changed continuously from outer surface into internal portion of concrete. Even the deteriorations in the structures due to the carbonation have been reported more, research on permeability characteristics of concrete considering carbonation and micro-structural information is very scarce.In this study, the permeability coefficient in carbonated concrete is derived by applying a capillary pore structure formation model in carbonated cement mortar and assuming that aggregates do not affect carbonation process in early-aged concrete as a function of porosity. The permeability obtained from the micro-level modeling for carbonated concrete is verified with the results of accelerated carbonation test and water penetration test in cement mortar.     

Atmospheric Dependence on Dielectric Loss of 1/6Ba5Nb4O15· 5/6BaNb2O6 Ceramics

Samples of 1/6Ba₅Nb₄O₁₅·5/6BaNb₂O₆ along with the pure end members, Ba₅Nb₄O₁₅ and BaNb₂O₆, were sintered under low oxygen partial pressure. The degradation mechanisms of dielectric loss in this reducing atmosphere have been studied. We found that the degradation occurred primarily due to the formation of oxygen vacancies caused by the reduction of Nb⁵⁺. This was determined by measuring the electrical conductivity, and through X-ray photoelectron spectroscopy. More importantly, the dielectric loss of 1/6Ba₅Nb₄O₁₅·5/6BaNb₂O₆ samples with higher temperature stability was further decreased on sintering in a reducing atmosphere. This observation has been explained by considering the increased porosity and formation of a reduced second phase, Ba_0.65NbO₃.     

Numerical and experimental investigation of three-dimensional flow in extrusion dies

The univariant element, Q₁ P₀, and the multivariant elements, QP₀ and R P₀, are compared for the numerical simulation of the flow in extrusion dies. The pressure distribution obtained by using the Q₁ P₀ element was found to be afflicted with the checkerboard pressure mode. On the other hand, the multivariant elements, Q P₀ and R P₀, gave accurate and physically reasonable velocity and pressure distributions. The computed values of the pressure drop across extrusion dies matched well with the pressure drop determined experimentally.     

Properties of chitosan‐based biopolymer films with various degrees of deacetylation and molecular weights

An increase in the depolymerization of chitosan was found with an increased concentration of sodium perborate. Acetic anhydride was added to reacetylated chitosan in a molar ratio per gulcosamine unit, and the amide I band of IR spectra changed with the addition of acetic anhydride. Sixteen chitosans with various molecular weights (MWs) and degrees of deacetylation (DODs) were prepared. X‐ray diffraction patterns indicated their amorphous and partially crystalline states. Increases in the chitosan MW and DOD increased the tensile strength (TS). TS of the chitosan films ranged from 22 to 61 MPa. However, the elongation (E) of chitosan films did not show any difference with MW. TS of chitosan films decreased with the reacetylation process. However, E of chitosan films was not dependent on DOD. The water vapor permeabilities (WVPs) of the chitosan films without a plasticizer were between 0.155 and 0.214 ng m/m² s Pa. As the chitosan MW increased, the chitosan film WVP increased, but the values were not significantly different. Moreover, the WVP values were not different from low DOD to high DOD. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3476–3484, 2003