Steady‐State and Dynamic Reactor Models for Hydrotreatment of Oil Fractions: A Review

The modeling of catalytic hydrotreatment reactors for petroleum fractions have been classified in several ways, for example steady‐state and dynamic, pseudohomogeneous, and heterogeneous, and so on. Depending on the system to be modeled, operating conditions and type of feedstock, these approaches could exhibit some advantages and disadvantages, wide scopes and limitations. In this review, the discussion about those modeling aspects, already published, is used to develop a generalized reactor model, which can be simplified in order to derive each single model previously reported. Some guides to estimate model parameters are also given.     

The effects of the number of links and navigation support on cognitive load and learning with hypertext: The mediating role of reading order

Problems in learning with hypertext systems have been claimed to be caused by high levels of disorientation and cognitive load. This was recognized by DeStefano and LeFevre [DeStefano, D., & LeFevre, J. -A., (2007). Cognitive load in hypertext reading: A review. Computers in Human Behavior, 23(3), 1616–1641.] who predicted an increase of cognitive load and impairment of learning for hypertexts with a higher number of links per page. From a practical perspective, several navigation support techniques, such as providing link suggestions, have been proposed for guiding learners and reducing cognitive overload. In an experiment, we tested DeStefano and LeFevre’s predictions as well as the usefulness of link suggestions. Participants used different versions of a hypertext, either with 3-links or 8-links per page, presenting link suggestions or not. We tested their cognitive load and learning outcomes. Results showed that there was a benefit of using link suggestions for learning, but no effect of number of links on learning was found. Moreover, the effects of our manipulations on cognitive load were mediated by the reading order that participants selected. Implications for research and the design of navigation support systems are discussed.     

Effects of Dry Grinding on the Structural Changes of Kaolinite Powders

The present study examined the effects of dry grinding, using ball-milling, on the structure of reference well-crystallized (KGa-1) and poorly crystallized (KGa-2) kaolinite powders from Georgia. Grinding produced a strong structural alteration, mainly along the c axis, resulting in disorder and total degradation of the crystal structure of the kaolinite and the formation of an amorphous product. The surface area increased with grinding time, mainly in KGa-2 (maximum value 50.27 m²/g), a result associated with particle-size reduction. These particles became more agglomerated with grinding, and the surface area decreased after 30 min, as confirmed by scanning electron microscopy and particle-size-distribution analysis. There was a limit to particle-size reduction with grinding time. When grinding time was increased, the original endothermic differential thermal analysis (DTA) effects of dehydroxylation in both samples shifted to lower temperatures, decreased in intensity, then disappeared completely after 120 min of grinding. The temperature of the characteristic first exothermic effect shifted slightly to lower temperatures with grinding, although the DTA effects did not increase with grinding time in either kaolinite sample, at least up to 325 min. The amorphous, mechanically activated kaolinite converted into low-crystalline mullite nuclei at a lower temperature than did the unground samples, as deduced by thermal and X-ray observations. This effect was especially important for the KGa-2 sample. Grinding did not seem to influence the formation of silicon-aluminum spinel from kaolinite. The present results may explain why ground kaolinite samples prepared via different routes—e.g., with differences in grinding—behave differently during high-temperature transformations, as reported in the related literature.     

Influence of operation variables on quality parameters of olive husk oil extracted with CO<Subscript>2</Subscript>: Three-step sequential extraction

Supercritical CO₂ extraction is a viable alternative process for the extraction of high-quality oil from olive husk (also known as olive pomace), a residue obtained in the production of olive oil. We analyzed the effect of pressure (100–300 bar), temperature (40–60°C), solvent flow (1–1.5 L/min), and particle size (0.30–0.55 mm) on four important quality parameters of the oil extracted with CO₂: tocopherol concentration, extinction coefficients at 232 and 270 nm, and saponification value. Response surface methodology was used to obtain mathematical expressions related to the operating variables and parameters studied. Results from these experiments were also used to design a three-step sequential CO₂ extraction procedure to obtain a higher-quality extract. The optimal operational sequence consisted of a first extraction step at 75 bar for 1 h using 1% (vol/vol) ethanol modifier, followed by a second extraction stage at 350 bar for 2.5 h without ethanol and a third step, also at 350 bar, for 2.5 h but using ethanol. These extraction conditions obtained an intermediate fraction of oil with 64% yield and all normal parameters according to European Commission food legislation. This fraction is suitable without any further refining. On the contrary, the oils obtained by hexane extraction and by conventional supercritical CO₂ extraction at optimal conditions are suitable for human consumption after further refining. This last finding may result in improved economics of the sequential CO₂ extraction process compared to the conventional extraction method with hexane.     

In situ density estimation of timber pieces by drilling residue analysis

Density values are essential for the characterization of wood elements in existing structures. A new method for the in-situ density estimation of timber pieces is proposed based on weighting the residue generated by conventional drilling. This research includes the design and development of a residue collector device coupled to a conventional drill and testing on four Spanish coniferous species: Laricio pine, Scots pine, Radiata pine and Maritime pine (Pinus nigra Arn., Pinus sylvestris L., Pinus radiata D. Don. and Pinus pinaster Ait., respectively). For each species, 44 specimens (except Scots pine, with 42) 60?×?90 mm cross-section and 150 mm length (half radial and half tangential orientation) were tested. Specimen density was obtained by mass/volume ratio. Three 8 mm diameter 46.5 mm deep holes were drilled in each specimen using a brad point bit. The drilling residue was weighed and density was calculated as a ratio to bore volume. Although only slightly smaller, residue density statistically differs from average specimen density. But the specimen density can be inferred by the correlation, statistically significant, with residuals drilling density (R²?=?80.7%) and even better with residual drilling mass (R²?=?84.4%).     

Non-linear plastic analysis of steel arches under lateral buckling

Curved graphs are proposed that relate the shape of the box cross-section of an arch to the real ultimate lateral strength for various values of length, support conditions and of height of the cross-section.The real ultimate lateral strength of a series of arches is determined and the results obtained are then compared to those provided by Sakimoto and Komatsu [1].Elastic–plastic steel material and geometric non-linearity hypotheses, residual stresses, and initial lateral deflection are all taken into consideration with respect to the real ultimate lateral strength.     

Integrating Travel Delays, Road Safety, Care, Vehicle Insurance and Cost-Benefit Analysis of Road Capacity Expansion in a Unified Framework

Assuming that both road safety and travel time are a function of traffic density and care from a driver’s standpoint, a theoretical framework is developed. First, an expected-utility framework is developed to study the optimal choice of care by a rational driver. Second, the subjective value of traffic density is derived as a measure of drivers’ willingness to pay for simultaneous road safety improvements and travel time savings. Third, the above results are revisited when car insurance is available. Fourth, a simple cost-benefit analysis rule of road capacity expansion is derived when moral hazard is present.     

Seasonal analysis of the thermal behaviour of traditional underground wine cellars in Spain

Traditional underground wine cellars are a good example of bioclimatic construction, providing optimum conditions for maturing wine with no energy consumption. This article studies the annual thermal behaviour of traditional underground wine cellars in one of the most well-known wine producing areas in Spain, the Ribera del Duero. For this we have applied a method based on multiple regression analysis using experimental data monitored for 1 year. The results show that the interior air temperature is fundamentally conditioned by the undisturbed temperature of the ground at the average depth of the wine cellar and by the temperature of the outside air (R² varies between 0.937 and 0.974, with an average of 0.964 for the three wine cellars studied). However, the stability of the wine cellar during changes of outside temperature differs according to the time of year. In the spring and summer, the stability is excellent and the influence of the ground temperature is much greater than that of the outside air temperature (beta coefficient for the ground temperature is 0.85 compared to 0.17 for the outside air temperature). In the autumn and winter, the stability of the wine cellar is reduced by the increased ventilation, reducing the influence of the ground temperature (β = 0.70) and increasing that of the outside air (β = 0.42).     

Electrochemical AFM investigation of horseradish peroxidase enzyme electro-immobilization with polypyrrole conducting polymer

In this paper we investigate the nano-characterization of polypyrrole (Ppy) thin film electro-synthesized on highly oriented pyrolitic graphite (HOPG) with and without horseradish peroxidase enzyme (HRP) using Atomic force microscopy (AFM) performed in contact mode and fluid cell with electrolyte and potential control (ECAFM). In situ electro-synthesis of thin polypyrrole film was made by cyclic volt–amperommetry achieving structured Ppy nanoparticles with two types of particle sizes and the same ellipsoidal shape. Furthermore, the electro-immobilization of HRP, onto this film, was made at a fixed potential, achieving different morphology characterized by highly rough, non-homogeneous structure, and partial maintaining of the ellipsoidal particle in specific sites. The effect of polarization time on morphological parameters was studied and two mechanisms of electro-immobilization of HRP with Ppy conducting polymers were proposed.