Consistent labeling of tracked objects in multiple cameras with overlapping fields of view

We address the issue of tracking moving objects in an environment covered by multiple uncalibrated cameras with overlapping fields of view, typical of most surveillance setups. In such a scenario, it is essential to establish correspondence between tracks of the same object, seen in different cameras, to recover complete information about the object. We call this the problem of consistent labeling of objects when seen in multiple cameras. We employ a novel approach of finding the limits of field of view (FOV) of each camera as visible in the other cameras. We show that, if the FOV lines are known, it is possible to disambiguate between multiple possibilities for correspondence. We present a method to automatically recover these lines by observing motion in the environment, Furthermore, once these lines are initialized, the homography between the views can also be recovered. We present results on indoor and outdoor sequences containing persons and vehicles.     

An overview of FDA medical device regulation as it relates to deep brain stimulation devices.

The United States Food and Drug Administration (FDA) is charged with assuring the safety and effectiveness of a variety of medical products and the FDA's Center for Devices and Radiological Health is responsible for premarket and postmarket regulation of medical devices. In this paper, we review--from device classification and clinical studies to the final marketing application--FDA's premarket requirements and postmarket requirements as they relate to deep brain stimulation devices.     

Validity of dynamic electrochemical impedance spectra of some amine corrosion inhibitors in petroleum/water corrosive mixtures by Kramers-Kronig transformation

In our previous works, the corrosion inhibition properties of propylamine (PA), iso-propylamine (i-PA), butylamine (BA), tert-butylamine (t-BA), hexylamine (HA), ethylenediamine (EDA), diethanolamine (DEA), 3-amino-1-propanol (3-AP), 2-dimethylethanolamine (2-DEA), cyclohexylamine (CHA), N-methylcyclohexylamine (N-MCA) and dicyclohexylamine (DCHA) have been investigated by means of electrochemical impedance spectroscopy (EIS) with a carbon steel rotating disc electrode in some petroleum/water corrosive mixtures containing acetic acid and NaCl at 25 °C. In this work, the Kramers-Kronig transformations (KKTs) were applied to evaluate the validity of the impedance data of these amine compounds in hydrodynamic condition. The results obtained showed that experimental impedance data did not satisfy in K-K relations completely viz. indicated some errors. These errors were related to stray capacitances, external transmission line effects, pits formation and change in interface during data acquisition at high and low frequencies regions. In addition, the selection of a suitable equivalent circuit strongly emphasized to better interpret of EIS data which in turn cause better resulted KKTs spectra. With considering obtained transformations, more effective inhibitor was selected with regard to its charge transfer resistance, the corrosion capacitance and well satisfying in K-K relations.     

Electromagnetic Resistive Drift Instability in Current Carrying Low Temperature Tokamak Edges

It is shown that the purely growing electrostatic rippling mode can couple with the shear Alfven wave to give rise to an oscillatory electromagnetic instability in tokamak edge regions. This mechanism can be one of the causes of electromagnetic fluctuations observed near plasma edges. This instability can occur only in the very low temperature regions where resistivity fluctuations can become important due to large electron-ion collision frequency.     

Low-loss high power RF switching using multifinger AlGaN/GaN MOSHFETs

We demonstrate a novel RF switch based on a multifinger AlGaN/GaN MOSHFET. Record high saturation current and breakdown voltage, extremely low gate leakage current and low gate capacitance of the III-N MOSHFETs make them excellent active elements for RF switching. Using a single element test circuit with 1-mm wide multifinger MOSHFET we achieved 0.27 dB insertion loss and more than 40 dB isolation. These parameters can be further improved by impedance matching and by using submicron gate devices. The maximum switching power extrapolated from the results for 1A/mm 100 /spl mu/m wide device exceeds 40 W for a 1-mm wide 2-A/mm MOSHFET.     

Effect of variable friction coefficient on sheet metal drawing

A variable friction model that relates the parameters of sheet metal drawing to the local lubrication conditions taking place during the deformation, has been integrated to a finite element program. Variable friction coefficients for the contacting surfaces are determined from the friction model, which uses the related parameters obtained at each time step of the finite element program as inputs. A number of numerical runs have been performed and the strains are compared with the experimental results for circular blanks. A good agreement is obtained between the numerical and experimental results for the variable friction model used.     

Rapid determination of the fracture toughness of metallic materials using circumferentially notched bars

Three types of material whose fracture toughness tests were previously performed by using circumferentially notched bars, namely (1) a dual-phase steel with three different morphologies; (2) an Al-Zn-Mg-Cu-wrought alloy; and (3) Al-Si-cast alloys with three different Si contents, were investigated in terms of accuracy and reliability of the testing method. Also, the advantages of using circumferentially notched bars for fracture toughness determination of metallic materials were discussed. With the help of stress concentration factors, which are associated with the bluntness of the notch, correction factors for the fracture toughness calculations are derived. The corrected fracture toughness values are found to be close to the uncorrected ones, implying that the testing procedure is reliable.     

The optimisation of higher order resampling methods in a multiprocessor environment

The processing of images obtained from satellites often involves highly repetitive calculations on very large amounts of data. This processing is extremely time consuming when these calculations are performed on sequential machines. Parallel computers are well suited to handling computationally expensive operations such as higher order interpolations on large data sets. This paper decribes work undertaken to develop parallel implementations of a set of resampling procedures on an Alliant VFX/4. Each resampling procedure implemented has been optimised in three stages. First, the algorithm has been restructured, where two-dimensional resampling is performed by two one-dimensional resampling operations. Second, each procedure has been reprogrammed in such a way that the autoparallelisation provided by the FX/Fortran compiler has been exploited. Thirdly, data dependent analysis of each procedure has been performed in order to achieve full optimization of each procedure; each procedure has been restructured where appropriate to circumvent vectorisation and concurrency inhibiting data dependencies. The nature and extent of the code optimization achieved for each procedure is presented in this paper. The original code for the most computationally expensive procedure, as targeted at a sequential machine, was found to have an execution time of 4900 seconds on the Alliant VFX/4 when compiled with regular compiler optimization options. Following algorithmic redesigning and reprogramming of the code, as indicated in stage 1 and stage 2, the execution time was reduced to 248 seconds. Restructuring of the code following data dependency analysis indicated in stage 3 in order to avoid data dependencies and allow concurrency and vectorisation, further reduced execution time to 162 seconds. The consequence of this work is that higher-order resampling methods which had not previous been practical are now routinely performed on the Alliant VFX/4 at the University of Dundee.     

Calcium phosphate/calcium oxalate crystal association in urinary stones: implications for heterogeneous nucleation of calcium oxalate

PURPOSE: Most stones contain more than one type of crystals, and some combinations, such as calcium phosphate/calcium oxalate, are more common than others. Epitaxy between the crystals has been suggested to play a role in growth of such stones. The specific aim of this study is to investigate the involvement of calcium phosphate in crystallization of calcium oxalate. MATERIALS AND METHODS: Twenty calcium oxalate stones or stone fragments were examined using various microscopic techniques, including scanning, transmission and back-scattered electron microscopy. Similarly, calcium oxalate stones induced on a plastic foreign body implanted inside urinary bladders of laboratory rats were also investigated. Examination of the interface between calcium phosphate and calcium oxalate crystals was emphasized. RESULTS: Close association between crystals of calcium phosphate and calcium oxalate were found in both the human and rat stones. All crystals examined were associated with an organic matrix on the surface and contained copious amounts of organic material within the crystalline entities. Interface between the crystals also appeared to be occupied by organic matrix. CONCLUSIONS: Results of this and other studies from our laboratory indicate that epitaxy between various crystals, even though theoretically possible, appears unlikely in vivo. The appearance of specific crystalline combinations in stones is probably a result of the urinary environment being conducive for crystallization of those components. Heterogeneous nucleation of calcium oxalate is most probably induced by biological elements, including membranous cellular degradation products.