Calcium phosphate/calcium oxalate crystal association in urinary stones: implications for heterogeneous nucleation of calcium oxalate

PURPOSE: Most stones contain more than one type of crystals, and some combinations, such as calcium phosphate/calcium oxalate, are more common than others. Epitaxy between the crystals has been suggested to play a role in growth of such stones. The specific aim of this study is to investigate the involvement of calcium phosphate in crystallization of calcium oxalate. MATERIALS AND METHODS: Twenty calcium oxalate stones or stone fragments were examined using various microscopic techniques, including scanning, transmission and back-scattered electron microscopy. Similarly, calcium oxalate stones induced on a plastic foreign body implanted inside urinary bladders of laboratory rats were also investigated. Examination of the interface between calcium phosphate and calcium oxalate crystals was emphasized. RESULTS: Close association between crystals of calcium phosphate and calcium oxalate were found in both the human and rat stones. All crystals examined were associated with an organic matrix on the surface and contained copious amounts of organic material within the crystalline entities. Interface between the crystals also appeared to be occupied by organic matrix. CONCLUSIONS: Results of this and other studies from our laboratory indicate that epitaxy between various crystals, even though theoretically possible, appears unlikely in vivo. The appearance of specific crystalline combinations in stones is probably a result of the urinary environment being conducive for crystallization of those components. Heterogeneous nucleation of calcium oxalate is most probably induced by biological elements, including membranous cellular degradation products.     

Compact WLAN disc antennas

A novel conical beam patch antenna design, suitable for local area network applications, uses a central cylindrical connection from the disc to ground to achieve a large reduction in resonant size. Results on efficiency, bandwidth, and pattern are reported for several prototypes.     

Dynamic bandwidth allocation for quality-of-service over Ethernet PONs

Ethernet-based passive optical network (EPON) technology is being considered as a promising solution for next-generation broadband access networks due to the convergence of low-cost Ethernet equipment and low-cost fiber infrastructures. A major feature for this new architecture is the use of a shared transmission media between all users; hence, medium access control arbitration mechanisms are essential for the successful implementation of EPON: i.e., to ensure a contention-free transmission and provide end users with equal access to the shared media. We propose to use the multipoint control protocol defined by the IEEE 802.3ah task force to arbitrate the transmission of different users, and we present different dynamic bandwidth allocation (DBA) algorithms to allocate bandwidths effectively and fairly between end users. These DBA algorithms are also augmented to support differentiated services, a crucial requirement for a converged broadband access network with heterogeneous traffic. We show that queueing delays under strict bandwidth allocation algorithms result in an unexpected behavior for certain traffic classes, and we suggest the use of DBA with appropriate local queue management to alleviate this inappropriate behavior. We conduct detailed simulation experiments to study the performance and validate the effectiveness of the proposed protocols.     

Reactive brazing of ceria to an ODS ferritic stainless steel

This research study shows that a ceria ceramic can be bonded to an ODS ferritic stainless steel (MA956) by reactive brazing using a Ag₆₈-Cu_27.5-Ti_4.5 interlayer. The ability to join these materials provides an alternative to the current ceramic interconnects used in the development of solid oxide fuel cells. Initial results show that the ceramic-metal bonds survived the bonding process irrespective of the degree of porosity within the ceria ceramic. Metallographic analyses indicate that a reaction zone formed along the ceria/braze interface, which was not only titanium rich, but also consisted of a mixture of copper oxides. When the ceramic-metal bonds were exposed to high bonding temperatures or when subjected to thermal cycling at 700°C, this reaction layer increased in thickness and had a detrimental affect on the mechanical strength of the final joints.     

Enhancement of computed tomography liver contrast using iomeprol-containing liposomes and detection of small liver tumors in rats

RATIONALE AND OBJECTIVES: We evaluated iomeprol-containing liposomes (Lipiom), a new contrast medium for computed tomography (CT) liver scanning, in an animal model of chemically induced hepatocellular carcinomas and other liver tumors in rats. METHODS: Liver tumors were induced by administration of carcinogens to rats, either 0.55% (w/w) 1'-hydroxysafrole in the diet or induction by 3'-methyl-4-diethylaminoazobenzene followed by promotion with carbon tetrachloride. CT scanning was performed 1-3 hr after intravenous injection of iomeprol-containing liposomes. RESULTS: After injection of iomeprol-containing liposomes at a dose of 70 mg of liposome-entrapped iodine per kilogram of body weight, the normal liver parenchyma showed a contrast enhancement, in Hounsfield units, of more than 60% over the control value before bolus. Liver tumors with no or few Kupffer cells were not enhanced and appeared as dark areas within the normal parenchyma. Tumors and pretumoral lesions devoid of Kupffer cells, as small as 3 mm in diameter, could be distinguished using this non-invasive method. CONCLUSION: CT liver scanning after injection of iomeprol-containing liposomes appears to be promising method for detecting liver tumors and focal liver lesions.     

BATCH SEQUENCING

Consider the single machine scheduling problem where there are a number of part types to be processed. A part type is defined as follows: Two parts are of the same part type if the machine does not require a setup in between the processing of these parts. The problem investigated in this paper is to find a sequence of batches of parts (if there are any) where all the requirements for parts are met. A heuristic and an exact algorithm are developed, and computational analysis is performed to measure the performance of the heuristic. The time complexity function of the heuristic is O(n²), and the exact algorithm runs in polynomial time given a fixed upper bound on the number of setups.     

Rheology of concentrated solutions of hyperbranched polyesters

The solution rheology of different generations of hyperbranched polyesters in N‐methyl‐2‐pyrrolidinone (NMP) solvent was examined in this study. The solutions exhibited Newtonian behavior over a wide range of polyester concentrations. Also, the relative viscosities of poly(amidoamine) (PAMAM) dendrimers in ethylenediamine were compared with those of the hyperbranched polyesters in NMP. Both types of dendritic polymers have relative viscosities that are exponential functions of their molar fraction in solution. The slopes of these relative viscosity curves show a linear relationship with respect to the generation number. PAMAM dendrimers have the greater slopes for each generation, reflecting their relatively larger intrinsic viscosity values.     

Validation of a Three-Dimensional Computational Fluid Dynamics Model of a Contact Tank

A three-dimensional (3D) computational fluid dynamics (CFD) model of a contact tank is presented in this paper. The model results are compared against 3D velocities and flow through curve (FTC) data, representing a tracer concentration profile, from a 1:8 scale physical model. The objective is to demonstrate that CFD models can simulate both the FTC and the 3D velocity field quite well. Simultaneous validation of velocities and FTC is important in ascertaining the predictive capabilities of CFD models, as physical model studies indicate that different baffle arrangements can lead to similar FTCs. Therefore, a good prediction of only FTC, as presented in previous 3D CFD model studies, does not necessarily imply a correct simulation of the flow field.