Carry-over round robin: a simple cell scheduling mechanism for ATMnetworks

We propose a simple mechanism named carry-over round robin (CORR) for scheduling cells in asynchronous transfer mode networks. We quantify the operational complexity of CORR scheduling and show that it is comparable to that of a simple round-robin scheduler. We then show that, albeit its simplicity, CORR is very competitive with much more sophisticated and significantly more complex scheduling disciplines in terms of performance. We evaluate the performance of CORR using both analysis and simulation, We derive analytical bounds on the worst case end-to-end delay achieved by a CORR scheduler for different traffic arrival patterns. Using traffic traces from MPEG video streams, we compare the delay performance of CORR with that of packet-by-packet generalized processor sharing (PGPS) and stop-and-go (SG). Our results show that, in terms of delay performance, CORR compares favorably with both PGPS and SG. We also analyze the fairness properties of CORR and show that it achieves near perfect fairness     

The communication system

The paper discusses the salient features of system design considerations for both uplink and downlink, subsystem details and the in-orbit performance of the communication system forAryabhata.     

A pulsed electromagnetic stimulator for bone-growth studies

A variable-pulse electromagnetic pulse generator has been developed to study the effect of the magnetic field on bone growth. The unit's repetition frequency can be varied from 2 to 200 Hz, and the peak current that it can drive is 10 A. The duty cycle of the pulse can be varied in steps of 10, 12.5, 17, 25, 50, 75, 83, 87.5, and 90% and is independent of the repetition frequency. The trailing edge of the output pulse can be controlled to produce any desired voltage-time pulse characteristic. This decay adjustment makes it possible to generate a variable-pulse frequency spectrum.     

Die Bedeutung geringer Arsengehalte im Ferronickel für die zukünftige Nickelversorgung der Stahlindustrie

Erläuterung der Nickelversorgung in der Stahlindustrie. Folgerungen für die Stahlherstellung beim Übergang auf arsenhaltiges Nickeloxiderz. Verhalten von Arsen bei der Herstellung von nichtrostendem Chrom-Nickel-Stahl mit rd. 18% Cr, 9% Ni und mit 0,009, 0,046 und 0,061% As. Prüfen der mechanischen Eigenschaften, der Schweißbarkeit und der chemischen Beständigkeit dieser Stähle in Abhängigkeit vom Arsengehalt. Abschätzen des Einflusses vorgegebener Arsengehalte auf die Neigung zur Anlaßsprödigkeit von Baustahl mit Gehalten bis zu 4% Ni. Überlegungen zur Gefährdung der Umwelt durch Arsen in den hier vorkommenden Gehalten.     

Homogeneous hydroformylation of cyclohexene with bis(acetylacetonato)diaquo cobalt (II)

Hydroformylation of cyclohexane by bis(acetylacetonato)diaquo cobalt(II) [Co(acac)₂ (H₂O)₂] in benzene solution produced the corresponding aldehyde, alcohol and saturated hydrocarbon. The influence of various experimental conditions on the product distribution has been investigated and the optimum conditions for the maximum yield of aldehyde (45%) and alcohol (55%) have been established. A tentative mechanism for hydroformylation has been suggested on the basis of the isolated green complex [Co(acac)₂]₂(C₆H₁₀) having catalytic activity comparable with Co (acac)₂(H₂O)₂ which has been isolated from the product mixture and also synthesised separately.     

Alpha-Quartz 2. Crystal chemistry,and nature and distribution of impurities

Crystal chemistry of alpha-quartz is discussed in relation to the nature, concentration and distribution of the common impurities. Two schemes for incorporation of impurities in the host structure,viz., the charge compensation model for untwinned natural quartz, and the broken-bond model for synthetic quartz to accomodate excess impurity residue after charge compensation, are critically reviewed. Another model for the presence of Al-H defects independent of alkali association in natural quartz is suggested. It is pointed out that the growth pressure influences the nature and distribution of impurities as well as generation of planar and line defects in synthetic quartz. It is also established that mechanicalQ (which is a measure of the acoustic loss) of synthetic crystals grown at low pressure deteriorates with increase in impurity content in excess of what is required for satisfying the charge compensation rule.     

Isothermal and non-isothermal crystallization behavior of poly(l-lactic acid): Effects of stereocomplex as nucleating agent

The effects of incorporated poly(d-lactic acid) (PDLA) as poly(lactic acid) (PLA) stereocomplex crystallites on the isothermal and non-isothermal crystallization behavior of poly(l-lactic acid) (PLLA) from the melt were investigated for a wide PDLA contents from 0.1 to 10 wt%. In isothermal crystallization from the melt, the radius growth rate of PLLA spherulites (crystallization temperature (T_c)≥125 °C), the induction period for PLLA spherulite formation (t_i) (T_c≥125 °C), the growth mechanism of PLLA crystallites (90 °C≤T_c≤150 °C), and the mechanical properties of the PLLA films were not affected by the incorporation of PDLA or the presence of stereocomplex crystallites as a nucleating agent. In contrast, the presence of stereocomplex crystallites significantly increased the number of PLLA spherulites per unit area or volume. In isothermal crystallization from the melt, at PDLA content of 10 wt%, the starting, half, and ending times for overall PLLA crystallization (t_c(S), t_c(1/2), and t_c(E), respectively) were much shorter than those at PDLA content of 0 wt%, due to the increased number of PLLA spherulites. Reversely, at PDLA content of 0.1 wt%, the t_c(S), t_c(1/2), and t_c(E) were longer than or similar to those at PDLA content of 0 wt%, probably due to the long t_i and the decreased number of spherulites. This seems to have been caused by free PDLA chains, which did not form stereocomplex crystallites. On the other hand, at PDLA contents of 0.3-3 wt%, the t_c(S), t_c(1/2), and t_c(E) were shorter than or similar to those at PDLA content of 0 wt% for the T_c range below 95 °C and above 125 °C, whereas this inclination was reversed for the T_c range of 100-120 °C. In the non-isothermal crystallization of as-cast or amorphous-made PLLA films during cooling from the melt, the addition of PDLA above 1 wt% was effective to accelerate overall PLLA crystallization. The X-ray diffractometry could trace the formation of stereocomplex crystallites in the melt-quenched PLLA films at PDLA contents above 1 wt%. This study revealed that the addition of small amounts of PDLA is effective to accelerate overall PLLA crystallization when the PDLA content and crystallization conditions are scrupulously selected.     

Artificial neural network model in surface modification by EDM using tungsten–copper powder metallurgy sintered electrodes

Electro-discharge machining (EDM) is a widely accepted nontraditional machining process used mostly for machining materials difficult to machine by conventional shearing process. Surface modification by powder metallurgy sintered tools is an uncommon aspect of EDM. Of late, it is being explored by many researchers. In the present paper, attempts have been made to model the surface modification phenomenon by EDM with artificial neural networks. Two output measures, material transfer rate and average layer thickness, have been correlated with different process parameters and presented in the form of plots. The predicted results are matching well with the experimental results.     

Synthesis and electrorheological characteristics of titanate nanotube suspensions under oscillatory shear

In this study, titanate nanotubes (TNTs) were synthesized by hydrothermal treatment of TiO₂ powders (P25) in a NaOH solution. The as-synthesized TNTs exhibit high surface area and large aspect ratio. Rheological properties of TNTs suspensions were then investigated under oscillatory shear. The TNTs fluid shows the viscoelastic behavior and the dynamic moduli (G′, G″) increase significantly by about 4 orders of magnitude as the electric field strength is up to 2.0 kV/mm. Transient response under dynamic shear reveals different changes in the microstructure of TNTs fluid from steady shear. The complex modulus of TNTs fluids is sensitive to temperature while that of P25 fluid become insensitive at higher temperature. Dynamic viscoelastic behavior suggests that structure of P25 to TNTs transition merits the enhancement of ER activity of TNTs fluid.     

Fouling control in sugarcane juice ultrafiltration with surface modified polysulfone and polyethersulfone membranes

Commercial 50 and 100 kD polyethersulfone (PES) and polysulfone (PS) ultrafiltration membranes were surface modified by UV photografting of poly(ethylene glycol) methacrylate (PEGMA) monomer. The modified membranes were characterized by the degree of grafting, water flux and molecular weight cutoff (MWCO) rating. The flux and fouling of the modified and unmodified membranes were examined with sugarcane juice and its polysaccharide fraction. Under the conditions of this study, the modified membranes displayed a low degree of grafting (26-36 μg/cm²), which was independent of the UV exposure duration; however, both membrane water flux and MWCO rating were affected by the irradiation time. In the best case, the modified membranes exhibited lower fouling with sugarcane juice; furthermore, the propensity to foul also decreased. More significantly, juice flux recovery was almost complete for successive UF-cleaning cycles.