Polyaniline and polypyrrole modified conductive nanocomposites of polyfuran and polythiophene with montmorillonite clay

Nanocomposites of polyfuran (PF) and polythiophene (PTP) with montmorillonite clay (MMT) were prepared and modified by loading of polyaniline (PANI) and polypyrrole (PPY) moieties via polymerization of aniline (ANI) and pyrrole (PY) in aqueous dispersions of PF-MMT and PTP-MMT nanocomposites. Formation of PANI and PPY and their subsequent incorporation in the PF-MMT and PTP-MMT composites was confirmed by FTIR absorption studies. X-ray diffraction (XRD) patterns of PANI and PPY modified PF-MMT and PTP-MMT composites showed that PF-MMT and PTP-MMT intercalates were still present in the modified composites. Scanning electron microscopic analysis revealed distinctive morphological patterns of the various composite particles. The dc conductivity values of PANI and PPY modified PF-MMT and PTP-MMT composites were in the order of 10⁻² S/cm in either system – a value much improved compared to the same for both of the unmodified PF-MMT (10⁻⁷ S/cm) and PTP-MMT (10⁻⁵ S/cm) nanocomposites respectively.     

Science and Technology of High Dielectric Constant Thin Films and Materials Integration for Application to High Frequency Devices

Thin films of Ba_1?x Sr _x Ti_1+y O_3+z (BST), were fabricated using both by RF-magnetron sputtering and MOCVD to demonstrate application to high frequency devices. Precise control of composition and microstructure is critical for the production of (Ba _x Sr_1?x )Ti_1+y O_3+z (BST) dielectric thin films with the large dependence of permittivity on electric field, low losses, and high electrical breakdown fields that are required for successful integration of BST into tunable high frequency devices. Here we review results on composition-microstructure-electrical property relationships of polycrystalline BST films produced by magnetron sputter deposition that are appropriate for microwave devices such as phase shifters. BST films with a multilayer structure were also developed with different Ti-elemental ratio in each layer to minimize losses and leakage current. Interfacial contamination from C and H species was studied and implications on electrical properties are highlighted. Finally, York's group at the University of California-Santa Barbara successfully integrated our BST films onto phase shifter arrays. The results show potential of BST films in such applications. Results from initial work on the integration of Cu-electrodes with BST films are also presented.     

Elastic and elastic-perfectly plastic analysis of an axisymmetric sinusoidal surface asperity contact

ABSTRACT

Closed-form finite-element empirical models are available for elastic and elastic–plastic spherical and sinusoidal contact. However, some of these models do not consider the effect of interaction with adjacent asperities or require extensive numerical resources because they employ a full 3-D model. Therefore this work has analysed and quantified the behaviour of an elastic and elastic- perfectly plastic axisymmetric sinusoidal surface in contact with a rigid flat for a wide range of material properties and different values of the amplitude to wavelength ratio from initial to complete contact (high load). The numerical results agreed well with the Hertz model and the Jackson–Green elastic–plastic spherical contact model at low loads. Empirical equations for elastic and also elastic-perfectly plastic cases are formulated for the contact pressure, contact area and surface separation. From the current analysis, it is found that it is not any single parameter, but different combinations of material properties and surface roughness that govern the whole contact behaviour. The critical value of the amplitude of the sinusoidal asperity below which it will deform completely elastically from initial to complete contact is established. At low values of amplitude normalized by the critical amplitude, it was found that the contact behaved similar to a spherical contact, with the average pressure (hardness) always remaining lower than three times the yield strength. However, at higher values the average pressure increased toward a value as high as six times the yield strength at complete contact. All of these equations should be useful in rough surface contact modelling, lubrication analysis, electrical contact modelling and in many other applications.     

The Effect of Intensity-Modulated Radiotherapy to the Head and Neck Region on the Oral Innate Immune Response and Oral Microbiome: A Prospective Cohort Study of Head and Neck Tumour Patients

Neutrophils, also known as polymorphonuclear leukocytes (PMNs), form a significant component of the innate host response, and the consequence of the interaction between the oral microbiota and PMNs is a crucial determinant of oral health status. The impact of radiation therapy (RT) for head and neck tumour (HNT) treatment on the oral innate immune system, neutrophils in particular, and the oral microbiome has not been thoroughly investigated. Therefore, the objective of this study was to characterize RT-mediated changes in oral neutrophils (oPMNs) and the oral microbiome in patients undergoing RT to treat HNTs. Oral rinse samples were collected prior to, during and post-RT from HNT patients receiving RT at Dental Oncology at Princess Margaret Cancer Centre. The oPMNs counts and activation states were analysed using flow cytometry, and the oral microbiome was analysed using 16S rRNA gene sequencing. Statistically significant (p < 0.05) drops in oPMN counts and the activation states of the CD11b, CD16, CD18, CD64 and H3Cit markers from pre-RT to post-RT were observed. Moreover, exposure to RT caused a significant reduction in the relative abundance of commensal Gram-negative bacteria and increased the commensal Gram-positive microbes. Ionizing radiation for the treatment of HNTs simultaneously decreased the recruitment of oPMNs into the oral cavity and suppressed their activation state. The oral microbiome composition post-RT was altered significantly due to RT which may favour the colonization of specific microbial communities unfavourable for the long-term development of a balanced oral microbiome.     

The Corrosion and Wear Performance of Microcrystalline WC-10Co-4Cr and Near-Nanocrystalline WC-17Co High Velocity Oxy-Fuel Sprayed Coatings on Steel Substrate

The study of near-nanocrystalline cermet composite coating was performed by depositing near-nanocrystalline WC-17Co powder using the high velocity oxy-fuel spraying technique. The WC-17Co powder consists of a core with an engineered near-nano-scale WC dispersion with a mean grain size 427 nm. The powder particle contains 6 wt pct of the ductile phase Co matrix mixed into the core to ensure that the reinforcing ceramic phase WC material is discontinuous to limit debridement during wear, while the remainder of the binding phase (11 wt pct) is applied as a coating on the powder particle to improve the ductility. The tribological properties of the coating, in terms of corrosion resistance, microhardness, and sliding abrasive wear, were studied and compared with those of an industrially standard microcrystalline WC-10Co-4Cr coating with a WC mean grain size 3 μm. Results indicated that the WC-17Co coating had superior wear and corrosion resistance compared to the WC-10Co-4Cr coating. The engineered WC-17Co powder with a duplex Co layer had prevented significant decarburization of the WC dispersion in the coating, thereby reducing the intersplat microporosity necessary for initiating microgalvanic cells. The improved wear resistance was attributed to the higher hardness value of the near-nanocrystalline WC-17Co coating.     

Progressive mean control chart is not a special case of an exponentially weighted moving average control chart

The progressive mean (PM) statistic is based on a simple idea of accumulating information of each subgroup by calculating the average progressively. Its weighting structure is based on a subgroup number that changes arithmetically, which makes the PM chart unique and efficient compared with the existing classical memory control charts. In a recent article (see reference 1), it was claimed that the PM chart is a special case of the exponentially weighted moving average (EMWA) chart. In this article, it is shown that even though the PM statistic can be written in the form of an EWMA statistic, the variance of the PM statistic is different from that of the EWMA statistic. Consequently, the limits of the PM chart are different from that of the EWMA chart. Therefore, it is found that the PM chart is not a special case of the EWMA chart; hence, the claim in reference 1 is incorrect. Furthermore, it is pointed out in this paper that no adaptive property in the weighting parameter of the PM statistic exists, further contradicting the claim in reference 1.     

An improved dynamic modeling of a multibody system with spherical joints

A dynamic modeling of multibody systems having spherical joints is reported in this work. In general, three intersecting orthogonal revolute joints are substituted for a spherical joint with vanishing lengths of intermediate links between the revolute joints. This procedure increases sizes of associated matrices in the equations of motion, thus increasing computational burden of an algorithm used for dynamic simulation and control. In the proposed methodology, Euler parameters, which are typically used for representation of a rigid-body orientation in three-dimensional Cartesian space, are employed to represent the orientation of a spherical joint that connects a link to its previous one providing three-degree-of-freedom motion capability. For the dynamic modeling, the concept of the Decoupled Natural Orthogonal Complement (DeNOC) matrices is utilized. It is shown in this work that the representation of spherical joints motion using Euler parameters avoids the unnecessary introduction of the intermediate links, thereby no increase in the sizes of the associated matrices with the dynamic equations of motion. To confirm the efficiency of the proposed representation, it is illustrated with the dynamic modeling of a spatial four-bar Revolute-Spherical–Spherical-Revolute (RSSR) mechanism, where the CPU time of the dynamic modeling based on proposed methodology is compared with that based on the revolute joints substitution. Finally, it is explained how a complex suspension and steering linkage can be modeled using the proposed concept of Euler parameters to represent a spherical joint.     

Impact behavior of unidirectional polyethylene–glass fibers: PMMA hybrid composite laminates

Unidirectional (UD) hybrid laminates based on glass fibers (GF) and high performance polyethylene fibers (PEF) were prepared with partially polymerized methyl methacrylate (MMA) at room temperature followed by heating at 55°C (well below the softening point of PEF) for 2 h. Izod impact strength of the composites was then measured. An interesting observation of the study was the change in impact strength that was largely dependent on the position of GF and PEF ply/plies present within the hybrid laminates. When the ply/plies of PEF were at the impacted surface, the impact strength showed a higher value than that of the case when GF ply/plies were at the impacted surface of the hybrid laminates. © 1996 John Wiley & Sons, Inc.     

Nano fibrillated cellulose-based foam by Pickering emulsion: Preparation,characterizations, and application as dye adsorbent

An ecofriendly and biodegradable porous structure was prepared from drying aqueous foams based on nano fibrillated cellulose (NFC), extracted from softwood pulp by subcritical water/CO₂ treatment (SC-NFC). The primary aim of this work was to use the modified SC-NFC as stabilizer for a water-based Pickering emulsion which upon drying, yielded porous cellulosic materials, a good dye adsorbent. In order to exploit the carboxymethylated SC-NFC (CMSC-NFC, with a degree of substitution of 0.35 and a charge density of 649 μeqv/g) as a stabilizer for water-based Pickering emulsion in subsequent step, an optimized quantity of octyl amine (30 mg/g of SC-NFC) was added to make them partially hydrophobic. A series of dry foam structures were prepared by varying the concentrations of treated CMSC-NFCs and 4 wt% was found to be the optimum concentration to yield foam with high porosity (99%) and low density (0.038 g/cc) along with high compression strength (0.24 MPa), superior to the conventionally extracted NFC. The foams were applied to capture as high as 98% of methylene blue dyes, making them a potential green candidate for treating industrial effluent. In addition, the dye adsorption kinetics and isotherms were found to be well suited with second order kinetics and Langmuir isotherm models.     

Synthesis and magnetorheological characteristics of ribbon‐like,polypyrrole‐coated carbonyl iron suspensions under oscillatory shear

One of the crucial problems of classical magnetorheological (MR) fluids is their high rate of sedimentation. This disadvantage may be substantially eliminated using core‐shell particles. The aim of this study is to prepare spherical carbonyl iron (CI) particles coated with conducing polymer polypyrrole (PPy) with ribbon‐like morphology. Scanning electron microscopy proved the formation of the ribbon‐like layer onto CI particles while Fourier transform infrared spectroscopy confirmed the chemical structure of PPy. The magnetic properties observed via vibrating sample magnetometer showed decreased magnetization saturation of core‐shell‐structured particles due to the existence of non‐magnetic surface layer. MR measurements performed under oscillatory shear flow as a function of the applied magnetic flux density, temperature, and particle concentration showed that core‐shell particle‐based MR suspension exhibits sufficient MR performance for practical applications. Moreover, the suspension stability is promoted significantly when core‐shell particles are used as a dispersed phase. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013