Poly dimethylsiloxane/carbon nanofiber nanocomposites: fabrication and characterization of electrical and thermal properties

This article presents the fabrication and characterization of poly dimethylsiloxane/carbon nanofiber (CNF)-based nanocomposites. Although silica and carbon nanoparticles have been traditionally used to reinforce mechanical properties in PDMS matrix nanocomposites, this article focuses on understanding their impacts on electrical and thermal properties. By adjusting both the silica and CNF concentrations, 12 different nanocomposite formulations were studied, and the thermal and electrical properties of these materials were experimentally characterized. The developed nanocomposites were prepared using a solvent-assisted method providing uniform dispersion of the CNFs in the polymer matrix. Scanning electron microscopy was employed to determine the dispersion of the CNFs at different length scales. The thermal properties, such as thermal stability and thermal diffusivity, of the developed nanocomposites were studied using thermogravimetirc and laser flash techniques. Furthermore, the electrical volume conductivity of each type of nanocomposite was tested using the four-probe method to eliminate the effects of contact electrical resistance during measurement. Experimental results showed that both CNFs and silica were able to impact on the overall properties of the synthesized PDMS/CNF nanocomposites. The developed nanocomposites have the potential to be applied to the development of new load sensors in the future.     

The Irradiation Performance and Microstructural Evolution in 9Cr-2W Steel Under Ion Irradiation

Grade 92 steel (9Cr-2W) is a ferritic-martensitic steel with good mechanical and thermal properties. It is being considered for structural applications in Generation IV reactors. Still, the irradiation performance of this alloy needs more investigation as a result of the limited available data. The irradiation performance investigation of Grade 92 steel would contribute to the understanding of engineering aspects including feasibility of application, economy, and maintenance. In this study, Grade 92 steel was irradiated by iron ion beam to 10, 50, and 100 dpa at 30 and 500 °C. In general, the samples exhibited good radiation damage resistance at these testing parameters. The radiation-induced hardening was higher at 30 °C with higher dislocation density; however, the dislocation density was less pronounced at higher temperature. Moreover, the irradiated samples at 30 °C had defect clusters and their density increased at higher doses. On the other hand, dislocation loops were found in the irradiated sample at 50 dpa and 500 °C. Further, the irradiated samples did not show any bubble or void.     

Visible Light Photocatalysis on Magnetically Recyclable Fe3O4/Cu2O Nanostructures

Catalysis Letters - Magnetically recyclable visible light photocatalysts for the degradation of critical organic pollutants are an urgent industrial requirement. Nonetheless, one component...     

Drug‐loaded polyurethane/clay nanocomposite nanofibers for topical drug‐delivery application

In this study, polyurethane/nanoclay nanocomposite nanofibrous webs were prepared by electrospinning. An antiseptic drug, chlorhexidine acetate (CA), was loaded onto montmorillonite clay and was then incorporated into polyurethane nanofibers. For comparison, the CA drug was loaded directly into the polyurethane solution dope used to electrospin the nanofibers. The emphasis was on investigating the effect of the drug loading into the nanoclay vis‐à‐vis direct drug loading on the drug‐release behavior of nanofibrous webs. The nanofibrous webs were also evaluated for other properties, such as moisture vapor transmission, porosity determination, contact angle measurement, and antibacterial activity, which are important for topical drug‐delivery application. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40230.     

Preparation of CaCO3‐based biomineralized polyvinylpyrrolidone–carboxymethylcellulose hydrogels and their viscoelastic behavior

In the blend of natural and synthetic polymer‐based biomaterial of polyvinylpyrrolidone (PVP) and carboxymethylcellulose (CMC), fabrication of CaCO₃ was successfully accomplished using simple liquid diffusion technique. The present study emphasizes the biomimetic mineralization in PVP–CMC hydrogel, and furthermore, several properties of this regenerated and functionalized hydrogel membranes were investigated. The physical properties were studied and confirmed the presence of CaCO₃ mineral in hydrogel by Fourier transform infrared spectroscopy and Scanning electron microscopy. Moreover, the absorptivity of water and mineral by PVP–CMC hydrogel was studied to determine its absorption capacity. Further, the viscoelastic properties (storage modulus, loss modulus, and complex viscosity) of mineralized and swelled samples (time: 5–150 min) were measured against angular frequency. It is interesting to know the increase of elastic nature of mineralized hydrogel filled with CaCO₃ maintaining the correlation between elastic property and viscous one of pure hydrogel. All these properties of biomineralized hydrogel suggest its application in biomedical field, like bone treatment, bone tissue regeneration, dental plaque and tissue replacement, etc. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40237.     

Analytical study of nuclear-coupled density-wave instability in a natural circulation pressure tube type boiling water reactor

An analytical model has been developed to study the nuclear-coupled density-wave instability in the Indian advanced heavy water reactor (AHWR) which is a natural circulation pressure tube type boiling water reactor. The model considers a point kinetics model for the neutron dynamics and a lumped parameter model for the fuel thermal dynamics along with the conservation equations of mass, momentum and energy and equation of state for the coolant. In addition, to study the effect of neutron interactions between different parts of the core, the model considers a coupled multipoint kinetics equation in place of simple point kinetics equation. Linear stability theory was applied to reveal the instability of in-phase and out-of-phase modes in the boiling channels of the AHWR. The results indicate that the stability behavior of the reactor is greatly influenced by the void reactivity coefficient, fuel time constant, radial power distribution and channel inlet orificing. The delayed neutrons were found to have a strong influence on the Type I and Type II instabilities observed at low and high channel powers, respectively. Also, it was found that the coupled multipoint kinetics model and the modal point kinetics model predict the same threshold power for out-of-phase instability if the coupling coefficient in the former model is half the eigen value separation between the fundamental and the first harmonic mode in the latter model. Decay ratio maps were predicted considering various operating parameters of the reactor, which are useful for its design.     

Managing the Topological Expansion of Computer Networks in an Optimal Way

This article describes a subgradient-based near-optimal heuristic algorithm designed for minimizing the search of links that need to be added to an existing telecommunications network to enhance the survivability and routability of the network.