Rheological and dielectrical characterization of melt mixed polycarbonate-multiwalled carbon nanotube composites

A series of composites of polycarbonate (PC) with 23 different contents of multiwalled carbon nanotubes (MWNT) was produced by melt mixing using the masterbatch dilution method. In dielectric measurements, AC conductivity and complex permittivity data obtained in the frequency range between 10⁻³ and 10⁷ Hz at room temperature indicated the electrical percolation threshold at about 1.0 wt%.

The dynamic mode melt rheological measurements for the same samples at eight temperatures between 170 and 280 °C showed a visible change in the frequency dependence of dynamic moduli and the absolute value of the complex viscosity |η*| particularly at low frequencies. In literature these changes are sometimes related to so called ‘percolation threshold concentration’. Applying this picture to our experimental data we have to assume that the percolation threshold is strongly dependent on the measurement temperature. It changes from about 5 to 0.5 wt% MWNT by increasing the measurement temperature from 170 to 280 °C, respectively. This temperature dependence cannot be explained by a classical liquid-solid transition but may be related to the existence of a combined nanotube-polymer network.     

Preparation of lot samples of nut meats for mycotoxin assay

A procedure has been devised for preparing lot samples of mycotoxin-contaminated nut meats so that a representative analytical sample may be removed. The sample is rapidly reduced to coarse size. A relatively large portion (about 1/10 of total sample) of subsample is then split out and further comminuted to a fine particle size with the aid of a fat solvent (meat-solvent, w/v, 3:2). The analytical sample is removed from this mixture. The procedure was tested with shelled almonds and shelled walnuts using radioactive nuts to simulate the mycotoxin contamination and provide a simple, precise measure of the contaminated nut meat distribution. The pooled coefficient of variation was 18% for the subsamples and 4.4% for the analytical samples. Considering the dilution factors used (1.50 and 2.14 contaminated nuts/10⁴ nuts) and the low degree of reliability of the lot sample, the sample preparation methods tested appear to be practical and reliable.     

Tensile strength of polyurethane exposed to nitrogen dioxide

Polyurethane prepared from tetramethylene glycol and diisocyanate was exposed in the form of films to small pressures of NO₂ and to NO₂ plus air. Tensile strength was measured as a function of exposure time and temperature with an apparatus especially constructed for the purpose of measuring mechanical properties in different environmental “atmospheres.”     

Chemical analysis of volatiles emitted by Pinus svlvestris after induction by insect oviposition

Gas chromatography – mass spectrometry analyses of the headspace volatiles of Scots pine (Pinus sylvestris) induced by egg deposition of the sawfly Diprion pini were conducted. The odor blend of systemically oviposition-induced pine twigs, attractive for the eulophid egg parasitoid Chrysonotomyia ruforum, was compared to volatiles released by damaged pine twigs (control) that are not attractive for the parasitoid. The mechanical damage inflicted to the control twigs mimicked the damage by a sawfly female prior to egg deposition. The odor blend released by oviposition-induced pine twigs consisted of numerous mono- and sesquiterpenes, which all were also present in the headspace of the artificially damaged control twigs. A quantitative comparison of the volatiles from oviposition-induced twigs and controls revealed that only the amounts of (E)--farnesene were significantly higher in the volatile blend of the oviposition-induced twigs. Volatiles from pine twigs treated with jasmonic acid (JA) also attract the egg parasitoid. No qualitative differences were detected when comparing the composition of the headspace of JA-treated pine twigs with the volatile blend of untreated control twigs. JA-treated pine twigs released significantly higher amounts of (E)--farnesene. However, the JA treatment induced a significant increase of the amount of further terpenoid components. The release of terpenoids by pine after wounding, egg deposition, and JA treatment is discussed with special respect to (E)--farnesene.     

Analysis of oxygen-18 tracer profiles in two-stage oxidation experiments (I): predominant oxygen diffusion in the growing scale

Typical two-stage oxidation experiments in high-temperature oxidation studies on metals are analyzed. Two cases of predominant oxygen diffusion in the scale are studied: pure volume diffusion and simultaneous transport via grain boundaries and via the bulk. An analytical expression for the growth of the oxide layer is given for the assumption that the chemical potential of the oxygen varies linearly over the oxide layer. The numerical treatment of the differential equation is improved so that the calculation is possibly faster and/ or more accurate compared to a method given in the literature. The experimental profiles are described by four parameters, the grain boundary width, the grain radius, and the volume and grain boundary diffusivities. Two equations correlating these parameters can be extracted from the profiles. Two benchmark tests are described for testing the program. An analytical solution is presented which approximately describes the distribution of O-18 in the oxide layer for pure volume diffusion. Experimental SIMS profiles on Fe-Cr-Al alloys are explored on the basis of our calculation.     

Mechatronic Systems for Machine Tools

This paper reviews current developments in mechatronic systems for metal cutting and forming machine tools. The integration of mechatronic modules to the machine tool and their interaction with manufacturing processes are presented. Sample mechatronic components for precision positioning and compensation of static, dynamic and thermal errors are presented as examples. The effect of modular integration of mechatronic system on the reconfigurability and reliability of the machine tools is discussed along with intervention strategies during machine tool operation. The performance and functionality aspects are discussed through active and passive intervention methods. A special emphasis was placed on active and passive damping of vibrations through piezo, magnetic and electro-hydraulic actuators. The modular integration of mechatronic components to the machine tool structure, electronic unit and CNC software system is presented. The paper concludes with the current research challenges required to expand the application of mechatronics in machine tools and manufacturing systems.     

The Integration of Vacuum Brazing into Heat Treatment - A Progressive Combined Process

The continuous constructive challenge to improve the functionality and efficiency of components always results in higher demands on production engineering, against the background of the generally increasing cost pressure. In many cases, you will just succeed in producing competitive and innovative products by combining and coupling of different procedures to an independent (hybrid) technology. The use of hybrid procedures for metal joining and heat treatment of metallic materials finds more and more industrial fields of application. Modern vacuum lines with integrated pressurized gas quenching are considered high-performance and flexible means of production for brazing and heat treatment tasks as well in the turbine industry as in the mould making and tool manufacturing industry. In doing so, the heat treatment is coupled with the brazing cycle in a combined process so that the brazing temperatures and soak times are adapted to the necessary temperatures and times for solution heat treatment and austeniting. This user-oriented article describes on the one hand examples of brazing of turbine components, but above all the practical experience from the plastics processing industry, where the requirement for a high-efficient cooling of injection moulding dies gains more and more importance.The combined procedure “Vacuum Brazing and Hardening” offers plenty of possibilities to produce mould inserts with an efficient tempering system in an economic way.     

Giant Anomalous Hall and Nernst Conductivities in Magnetic All-d Metal Heusler Alloys

All-d Heuslers are a category of novel compounds combining versatile functionalities such as caloric responses and spintronics with enhanced mechanical properties. Despite the promising transport properties (anomalous Hall (AHC) and anomalous Nernst (ANC) conductivities) shown in the conventional Co₂XY Heuslers with p-d hybridization, the all-d Heuslers with only d-d hybridization open a new horizon to search for new candidates with outstanding transport properties. In this work, the AHC and ANC are evaluated for thermodynamically stable ferro/ferri-magnetic all-d-metal regular Heusler compounds based on high-throughput first-principles calculations. It is observed that quite a few materials exhibit giant AHCs and ANCs, such as cubic Re₂TaMn with an AHC of 2011 S cm^-1, and tetragonal Pt₂CrRh with an AHC of 1966 S cm^-1 and an ANC of 7.50 A m^-1K^-1. Comprehensive analysis on the electronic structure reveals that the high AHC can be attributed to the occurrence of the Weyl nodes or gapped nodal lines in the neighborhood of the Fermi level. The correlations between such transport properties and the number of valence electrons are also thoroughly investigated, which provides a practical guidance to tailor AHC and ANC via chemical doping for transverse thermoelectric applications.