A reaction model for the electrochemical synthesis of adipontrile

A theoretical and experimental study of the electrohydrodimerization process to produce adiponitrile is used to determine an appropriate reaction model. From numerical simulations of five proposed reaction schemes and subsequent comparison with experimental data, the most favoured route is via an anion, intermediate of acrylonitrile. This route, a five step reaction involving electrochemical and chemical reaction in a diffusion/reaction layer, gives good predictions of product distributions over a wide range of current densities and acrylonitrile concentrations of product distributions over a wide range of current densities and acrylonitrile concentrations.     

Mössbauer spectroscopy study on the corrosion inhibition of carbon steel in hydrochloric acid solution

The effect of ammonium polymolybdate (APM) on the corrosion of carbon steel in a solution of 1 M HCl was studied by weight loss and Mössbauer spectrometry. Inhibition efficiencies (P) have been obtained from weight measurement. The inhibition efficiencies increased with increase APM concentration. Mössbauer spectrometry shows that a superficial compound is formed on the electrode surface as a result of corrosion.     

Calculation of optimal thermal load of intermittently heated buildings

A building is permanently in thermodynamic non-equilibrium due to changing weather, free gains and indoor temperature set-point. Load calculation in dynamic conditions is an essential goal of building energy simulation. This paper demonstrates that the load calculation is a control problem. Supposing that the thermal model of the building is linear and that the model of the building, the weather conditions and occupational program are known in the design stage, the paper proposes an unconstrained optimal control algorithm which uses feed-forward to compensate the weather conditions and model predictive programming (MPP) for set-point tracking. MPP is obtained by modifying the dynamic matrix control (DMC), a variant of model predictive control (MPC).The peak load depends on the set-back time of the indoor temperature: smaller the set-back time, larger the peak load, but smaller energy consumption. Then, the choice of the weighting coefficients in the model predictive programming may be done on economical considerations.     

Simultaneous biohydrogen production and wastewater treatment based on the selective enrichment of the fermentation ecosystem

Biohydrogen production from synthetic wastewater as substrate was studied in anaerobic small scale batch reactors. Enriched anaerobic mixed consortia sampled from various environments were used as parent inocula to start the bioreactors. Selective enrichments were achieved by various physical and chemical pretreatments and changes in the microbial communities were monitored by metagenomic and molecular diagnostics approaches. Experimental data showed the feasibility of biohydrogen production using synthetic wastewater as substrate. The hydrogen generation capability of the different mixed consortia is clearly dependent on the pretreatment methods. The described approach opens the possibility for an alternative way towards simultaneous wastewater treatment and renewable energy generation.     

SEM‐EDX and microftir studies on evaluation of protection capacity of some thin phosphate layers

This article presents the SEM‐EDX and microFTIR study and the corrosion behavior of new five types of phosphated coatings obtained by coprecipitation in acid aqueous medium of some metal cations, pursuing the influence of the addition of other cations and a moderator of precipitation, on the uniformity and compactness of the layers and on the morphology of dendritic structure of Zn(II) and Fe(II) phosphates. Microsc. Res. Tech. 2012. © 2012 Wiley Periodicals, Inc.     

Modification to the renneting functionality of casein micelles caused by nonionic surfactants

Nonionic emulsifiers of small molecular weight such as polysorbates are widely used in dairy products. Nevertheless, the mechanism of interaction between these surfactants and milk proteins is not yet fully understood. This work investigated the effect of Tween 20 on casein micelles by studying the renneting behavior of skim milk in the presence of different amounts of surfactant. The presence of Tween accelerated both the first and second phase of renneting in skim milk. The gel obtained showed a higher elastic modulus than that of a skim milk gel, but also showed similar brittleness. By varying the size of the surfactant (Tween 20 or Tween 80) as well as the colloidal state of the proteins in solution, it was possible to demonstrate that the surfactant did not have a direct effect on the activity of the enzyme, but rather had a direct effect on the casein micelles. The effect of surfactant on the gelation point was reduced by increasing surfactant size. The presence of Tween caused an increase in the size of the micelles without affecting their stability. In addition, Tween did not alter the amount of caseins free in the serum phase. These findings can contribute to improving our ability to custom design final structures in rennet-induced gels, though further studies are needed to fully understand the mechanism at play when casein micelles are enzymatically cleaved in the presence of nonionic surfactants of small molecular weight.     

Acetylcholinesterase voltammetric biosensors based on carbon nanostructure-chitosan composite material for organophosphate pesticides

A sensitive biosensor for chloropyrifos (CPF), an organophosphorus pesticide, was developed by immobilizing acetylcholinesterase (AChE) through covalent bonding to an oxidized exfoliated graphite nanoplatelet (xGnPs)–chitosan cross-linked composite. Because of the increased surface area and the conductive properties of the nanomaterial, AChE developed a high affinity for acetylthiocholine (ATCI) and formed thiocholine with a fast response. The response of the sensor was a linear function of ATCI concentration in two segments, one from 0.005 to 0.039 mM and the second from 0.064 mM to 0.258 mM. The corresponding equation for the first range was i_p(A) = 2.26 × 10^? 5c + 4.39 × 10^? 7 (R² = 0.992) and the equation for the second was i_p(A) = 6.80 × 10^? 6c + 1.30 × 10^? 6 (R² = 1.000), with a detection limit of 1.58 × 10^? 10 M. The fabrication of the sensor was simple, the response was fast and the stability acceptable. This sensor has many potential applications, the foremost being in organophosphorus pesticides.     

Compact Modules for Wireless Communication Systems in the E-Band (71–76 GHz)

The millimeter-wave spectrum above 70 GHz provides a cost-effective solution to increase the wireless communications data rates by increasing the carrier wave frequencies. We report on the development of two key components of a wireless transmission system, a high-speed photodiode (HS-PD) and a Schottky Barrier Diode (SBD). Both components operate uncooled, a key issue in the development of compact modules. On the transmitter side, an improved design of the HS-PD allows it to deliver an output RF power exceeding 0 dBm (1 mW). On the receiver side, we present the design process and achieved results on the development of a compact direct envelope detection receiver based on a quasi-optical SDB module. Different resonant (meander dipole) and broadband (Log-Spiral and Log-Periodic) planar antenna solutions are designed, matching the antenna and Schottky diode impedances at high frequency. Impedance matching at baseband is also provided by means of an impedance transition to a 50 Ohm output. From this comparison, we demonstrate the excellent performance of the broadband antennas over the entire E-band by setting up a short-range wireless link transmitting a 1 Gbps data signal.     

Digital image correlation techniques to investigate strain fields and cracking phenomena in asphalt materials

This paper is the outcome of a specific task group of the RILEM Technical Committee 241-MCD “Mechanisms of Cracking and Debonding in Asphalt and Composite Pavements”. The group on “Advanced Measurement Techniques” was established in 2011 to investigate DIC applications for non-destructive and non-contact measurements of strain fields during laboratory testing. The paper illustrates different DIC/optical flow applications in measuring strain distribution during laboratory testing. Specific applications of DIC for evaluating crack initiation and crack propagation in asphalt materials are presented.