Essential oil composition of commercial black tea (Camellia sinensis)

The essential oil components of different tea brands were investigated by gas chromatography. The oil yields of dried tea samples were ranged from 0.09% to 0.63%. Twenty-five compounds from Supreme and Lipton Yellow Label tea brands representing 98.0% and 88.0% of the Camellia sinensis oil were identified, respectively. The main ones were β-pinene (51.2%) and α-pinene (30.2%). Nineteen components from Tapal tea brand representing 76.7% of the C. sinensis oil were determined with high contents of muurol-5-en-4-a-ol (10.5%) and muurol-5-en-4-b-ol (31.3%). Fifteen components from Deer and Diana tea brands were identified, accounting for 83.3% and 78.2% of the oil containing α-cadinol and β-pinene. Seventeen components from non-branded teas were determined with high contents of muurol-5-en-4-a-ol and muurol-5-en-4-b-ol. Twenty-one compounds from non-branded Bangladeshi Shezan and Indian teas were also identified. All oils consisted of monoterpenic hydrocarbons, oxygenated monoterpenes and sesquiterpenes.     

Prodrug esters of the indolocarbazole CEP-751 (KT-6587)

Prodrug esters of the indolocarbazole CEP-751 (KT-6587) were prepared with the goal of identifying water soluble, stable but cleavable forms for intravenous dosing. A dipeptide proform Lys-beta-Ala (16, CEP-2563/KT-8391) was identified for advancement to clinical trials.     

Antioxidant and anticholinesterase evaluation of selected Turkish Salvia species

Since Salvia species (Lamiaceae) have been recorded to be used against memory loss in European folk medicine, we herein examined in vitro anticholinesterase and antioxidant activities of 56 extracts prepared with petroleum ether, chloroform, ethyl acetate and methanol obtained from 14 Salvia species (Salvia albimaculata Hedge and Hub, Salvia aucheri Bentham var. canescens Boiss and Heldr, Salvia candidissima Vahl. ssp. occidentalis, Salvia ceratophylla L., Salvia cryptantha Montbret and Bentham, Salvia cyanescens Boiss and Bal., Salvia frigida Boiss, Salvia forskahlei L., Salvia halophilaHedge, Salvia migrostegia Boiss and Bal., Salvia multicaulis Vahl., Salvia sclarea L., Salvia syriaca L., Salvia verticillata L. ssp. amasiaca) growing in Turkey. The antioxidant activities were assessed by both chemical and enzymatic methods against 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging and xanthine/xanthine oxidase (XO) system generated superoxide anion radical inhibition. Anticholinesterase effect of the extracts was tested against both acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) at concentrations of 0.2 and 1 mg/ml using a microplate-reader assay based on the Ellman method. Most of the extracts did not show any activity against AChE at 0.2 mg/ml, while the chloroform extracts had noticeable inhibition against BChE between 47.7% and 74.7%. The most active extracts at 1 mg/ml for AChE inhibition were observed to be petroleum ether extract of Salvia albimaculata (89.4%) and chloroform extract of Salvia cyanescens (80.2%), whereas ethyl acetate extracts of Salvia frigida and Salvia migrostegia, chloroform extracts of Salvia candidissima ssp. occidentalis and Salvia ceratophylla, as well as petroleum ether extract of Salvia cyanescens were found to inhibit potently BChE (92.2%, 89.6%, 91.1%, 91.3%, and 91.8%, respectively). Particularly, the ethyl acetate and methanol extracts were observed to be highly active against both DPPH and XO. Our data indicates that nonpolar extracts of Salvia species for anticholinesterase activity and the polar extracts for antioxidant activity are worth further phytochemical evaluation for identifying their active components.     

Role of solute segregation on microstructure and mechanical properties of zircaloy-4

The Microstructure of two different lots of Zircaloy-4 was investigated by using a scanning electron microscope (SEM) attached to an energy dispersive system (EDS). The alloy containing Ni higher than the ASTM specification shows parallel plate structure with segregation of Ni, Fe, and Cr at the triple points of β-grains, and it failed during forging due to crack initiation. The second alloy having Ni content within the ASTM specification has basketweave morphology with minute segregation of Fe and Cr and was forged successfully. The absorbed energy is higher for the successfully forged alloy than for the alloy that failed during forging. It was also observed that the fracture started from the segregated area rich in Ni, Fe, and Cr, and propagated along the plate. The alloy with parallel plate structure is harder than the alloy with basketweave structure.     

Dielectric,ferroelectric, and field-induced strain properties of Ta-doped 0.99Bi0.5(Na0.82K0.18)0.5TiO3–0.01LiSbO3 ceramics

Ta-doped 0.99Bi_0.5(Na_0.82K_0.18)_0.5TiO₃–0.01LiSbO₃ (BNKTT–LS) ceramics were prepared through a conventional mixed oxide solid-state sintering route. Partial substitution of Ta for Ti decreased the dielectric constant and depolarization temperature. The dielectric curves, polarization and strain hysteresis loops demonstrated that the incorporation of Ta stabilized the canonical relaxor phase of BNKT–LS ceramics leading to the degradation of piezoelectric and ferroelectric responses. The destabilization of field-induced ferroelectric order at x = 0.013 was accompanied by substantial enhancement in strain level. A unipolar field-induced strain of 0.39 % with a normalized strain (S _max/E _max =  $ d_{33}^{*} $ ) of 650 pm/V was achieved at a driving field of 6 kV/mm. The observed large strain can be attributed to the non-ergodic relaxor phase at zero electric field that transformed into an ergodic relaxor phase under the influence of the applied electric field.     

Modification of the structural and electrical properties of graphene layers by Pt adsorbates

The properties of graphene are strongly affected by metal adsorbates and clusters on graphene. Here, we study the effect of a thin layer of platinum (Pt) metal on exfoliated single, bi- and trilayer graphene and on chemical vapor deposition-grown single-layer graphene by using Raman spectroscopy and transport measurements. The Raman spectra and transport measurements show that Pt affects the structure as well as the electronic properties of graphene. The shift of peak frequencies, intensities and widths of the Raman bands were analyzed after the deposition of Pt with different thicknesses (1, 3, 5 nm) on the graphene. The shifts in the G and 2D peak positions of the Raman spectra indicate the n-type doping effect by the Pt metal. The doping effect was also confirmed by gate-voltage dependent resistivity measurements. The doping effect by the Pt metal is stable under ambient conditions, and the doping intensity increases with the increasing Pt deposition without inducing a severe degradation of the charge carrier mobility.     

Stability Analysis of Laminated Soft Core Sandwich Plates Using Higher Order Zig-Zag Plate Theory

C₀ finite element model based on higher order zig-zag plate theory is used to study the stability analysis of laminated sandwich plates. The in-plane displacement field is obtained by superposing a global cubically varying displacement field on a zig-zag linearly varying displacement field with different slope in each layer. The transverse displacement assumes to have a quadratic variation within the core and constant in the faces. The conditions regarding transverse shear stress at layer interfaces and top and bottom are satisfied. Numerical examples covering different features of laminated sandwich plates are presented to illustrate the accuracy of the model.     

A wind map of Bangladesh

Utilization of wind energy in Bangladesh has been slow mainly due to lack of quality wind data. Recent measurements in some places have shown significant wind energy potentials in Bangladesh. In this paper, a wind map is presented which incorporates several microscale features, such as terrain roughness, elevation etc. with a mesoscale model. Several meso-maps were obtained from global databases and a suitable model was chosen and modified for a 30-m elevation. Ground data from various sources were collected and modified for height and land condition adjustments based on local knowledge and GIS information. It was found that, the generated wind map and the modified ground data resemble. Annual average wind speed at 30 m height along the coastal belt is above 5 m/s. Wind speed in northeastern parts is above 4.5 m/s while inland wind speed is around 3.5 m/s for most part of Bangladesh. Small-scale wind turbines could be installed and tested in locations such as St. Martins Island, Cox’s Bazar, Patenga, Bhola, Barguna, Dinajpur, Thakurgaon and Panchagar.