Static thermal conductivity methods for solid materials

Various experimental arrangements for the determination of steady-state thermal conductivities, as adopted for different situations, are reviewed. The case where the sample geometry and dimensions are imposed is treated distinctly from that where they may be chosen by the experimenter. In the latter case, it is shown that the set-up adopted may vary significantly according to the magnitude of the conductivity, the temperature range investigated, the geometry, and the dimensions of the samples available. Some devices which were recently developed in the author's laboratory are taken as illustrative examples and briefly discussed.     

Controlled degradation of natural rubber and modification of the obtained telechelic oligoisoprenes: Preliminary study of their potentiality as polyurethane foam precursors

Telechelic oligoisoprenes were successfully prepared by the selective controlled degradation of natural rubber, a renewable source, via epoxidation and cleavage reactions. The molar mass of the oligoisoprene product obtained depends on the degree of epoxidation of the starting materials. The chemically modified structures obtained via epoxidation, hydrogenation, and ring opening of epoxide groups were also studied, and the chemical structures and thermal properties of the oligoisoprene products were determined. Moreover, the preliminary study of preparation of hydroxytelechelic natural rubber (HTNR)‐based polyurethane foam was performed. A novel HTNR‐based polyurethane foam was successfully prepared and its thermal properties were investigated and the results indicated that the HTNR‐based polyurethane foam has a good low temperature flexibility. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Distribution of 7Be, 210Pb and 137Cs in watersheds of different scales in the Seine River basin: inventories and residence times

The activity of environmental radionuclides ((7)Be, (210)Pb and (137)Cs) was monitored in nested catchments, inside the Seine River basin. Suspended matter data was collected at 8 different watersheds, ranging from order 1 to order 7, and ranging in size over 4 orders of magnitude. Suspended matter was analyzed for (210)Pb, (137)Cs and (7)Be, and used to calculate the flux of sediments out of each watershed. Monthly atmospheric flux data of (210)Pb and (7)Be was analyzed to assess the input flux of each into the watersheds, taking into account the rainfall during sampling periods. Taking advantage of the different half-lives of (7)Be (53 days) and (210)Pb (22 years), a two-box model was built for each of the catchments following a methodology previously developed by Dominik et al. [Dominik J, Burrus D, Vernet JP. Transport of the environmental radionuclides in alpine watershed. Earth Planet Sci Letters 1987; 84: 165-180.]. The model divides the watershed into a soil box and a rapid reservoir and provides insight into the removal rate of suspended matter from the surrounding watershed. The model enables the assessment of the surface area and the residence time of slow and rapid reservoirs to describe the fate of contaminants of atmospheric origin inside the river basin. The model was improved by considering the dissolved fraction in the total flux and adding the (137)Cs inventory as an additional constraint. The effects of these changes are discussed. Residence times in the soil box, characterized by low transport velocity, range between 4800 years at Melarchez (order 1) to about 30000 years at Andresy and Poses (order 7). They remain constant in each watershed over a large range of variation of atmospheric fluxes of (7)Be and (210)Pb during the whole study, but are sensitive to SM variations. The residence time in the rapid box, which includes the surface of the river and immediate surroundings, is less than one year, while its surface area is in the range 0.6% to 2.2% of the total catchment area. They are sensitive to (7)Be atmospheric flux variations. The two-box model was used to estimate the amount of the radionuclides in each reservoir. Inventories appear to be constant from one watershed to the next. The (7)Be inventory ratio in the rapid and slow boxes expresses the rate of particle-reactive atmospheric pollutants that will be rapidly delivered to the river.     

Preparation and physico‐mechanical,thermal and acoustic properties of flexible polyurethane foams based on hydroxytelechelic natural rubber

Novel flexible polyurethane foams were successfully prepared from a renewable source, hydroxytelechelic natural rubber (HTNR) having different molecular weights (1000–3400 g mol^?1) and variation of epoxide contents (EHTNR, 0–35% epoxidation) by a one‐shot technique. The chemical and cell structures as well as physico‐mechanical, thermal, and acoustic properties were characterized and compared with commercial polyol analogs. The obtained HTNR based foams are open cell structures with cell dimensions between 0.38 and 0.47 mm. The HTNR1000 based foam exhibits better mechanical properties but lower elongation at break than those of commercial polyol analog. However, the HTNR3400 based foam shows the best elastic properties. In a series of EHTNR based foams, the tensile and compressive strengths show a tendency to increase with increasing epoxide content and amount of 1,4‐butanediol (BD). The HTNR based foams demonstrate better low temperature flexibility than that of the foam based on commercial polyol. Moreover, the HTNR based polyurethane foams was found to be an excellent absorber of acoustics. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Ozone Application for Postharvest Disinfection of Tomatoes

Ozone is an effective alternative for the postharvest treatment of fruits and vegetables. The purpose of this study was to evaluate the ozone application in gaseous or aqueous phases for postharvest disinfection of tomatoes (Lycopersicon esculentum Mill) cultivar FA-180. Fruits harvested at the breaker stage were exposed to ozone concentrations of 25 and 45 mg m^?3 for 2 h per day during 16 days, at non-controlled temperature and relative humidity. Exposure to ozone during storage extends the shelf-life of tomatoes, besides preserving its sensory attributes. Mature tomatoes, inoculated with Escherichia coli ATCC 25922, were washed with ozonated water containing 0.5 to 1.0 mg L^?1 during 15 to 30 min. To achieve an adequate disinfection, 1 mg L^?1 and 15 min are recommended. The disinfection with ozonated water was effective.     

Apolipoprotein A1: A new serum marker correlated to JAK2 V617F proportion at diagnosis in patients with polycythemia vera

Polycythemia vera (PV) is a myeloproliferative disorder (MPD) characterized by an acquired gain-of-function mutation of the JAK2 protein (JAK2 V617F). Allele-specific quantitative PCR has showed a JAK2 V617F dosage effect on haematological and clinical parameters of PV at diagnosis, but it is unknown whether the level of certain serum proteins might correlate with the proportion of mutated JAK2. Taking into account that such proteins could represent useful prognostic marker, we investigated the serum protein profile of PV patients by SELDI-TOF MS. We identified apolipoprotein A1 (Apo-A1) as a serum marker correlated to the percentage of JAK2 V617F alleles; Apo-A1 expression being the highest for PV patients with more than 75% of mutated alleles. Immuno-assay on an automated random immuno-analyser confirmed the correlation between Apo-A1 concentrations and JAK2 V617F percentages, and showed that serum Apo-A1 assay allowed the specific discrimination of PV patients with high levels of mutated alleles (≥75%). These data suggest that Apo-A1 assay could be a useful assay for the stratification of PV patients at diagnosis.     

Edge-preserving image denoising and estimation of discontinuous surfaces

In this paper, we are interested in the problem of estimating a discontinuous surface from noisy data. A novel procedure for this problem is proposed based on local linear kernel smoothing, in which local neighborhoods are adapted to the local smoothness of the surface measured by the observed data. The procedure can therefore remove noise correctly in continuity regions of the surface and preserve discontinuities at the same time. Since an image can be regarded as a surface of the image intensity function and such a surface has discontinuities at the outlines of objects, this procedure can be applied directly to image denoising. Numerical studies show that it works well in applications, compared to some existing procedures.     

Contribution bacterienne a la corrosion et a la protection des metaux

The metabolism of aerobic bacteria and anaerobic bacteria being very different, their influence on the metal-corrosion is also not similar.A living bacterium, in nutrient media, at optimal pH and redox potential, grows very well and the corrosion disappears. The non-proteolytic, reductor and oxygen-using bacteria are the best. But, if a bacterium gives complexing products, it dies and the corrosion increases.Experiments in media satured with O₂ or N₂ have proved that a bacterium decreasing the corrosion in aerobic, increases the corrosion when it is put in anaerobic media.