Nanoscale capacitance imaging with attofarad resolution using ac current sensing atomic force microscopy

Nanoscale capacitance imaging with attofarad resolution (～1?aF) of a nano-structured oxide thin film, using ac current sensing atomic force microscopy, is reported. Capacitance images are shown to follow the topographic profile of the oxide closely, with nanometre vertical resolution. A comparison between experimental data and theoretical models shows that the capacitance variations observed in the measurements can be mainly associated with the capacitance probed by the tip apex and not with positional changes of stray capacitance contributions. Capacitance versus distance measurements further support this conclusion. The application of this technique to the characterization of samples with non-voltage-dependent capacitance, such as very thin dielectric films, self-assembled monolayers and biological membranes, can provide new insight into the dielectric properties at the nanoscale.     

Screening and selective quantification of illicit drugs in wastewater by mixed-mode solid-phase extraction and quadrupole-time-of-flight liquid chromatography-mass spectrometry

For the first time, a mixed-mode solid-phase extraction with fractionation of basic analytes from neutral and acidic species during cartridge elution and liquid chromatography-quadrupole-time-of-flight mass spectrometry (LC-QTOF-MS) was combined for the quantitative determination of 24 illicit drugs and metabolites in urban sewage samples. The effects of several sample preparation and instrumental parameters in the sensitivity and selectivity of the quantitative method are thoroughly discussed. Under final working conditions, recoveries above 63% and 82% were attained for all species in raw and treated sewage, respectively; whereas, the limits of quantification of the method, defined for a signal-to-noise of 10 (S/N = 10), ranged from 2 to 50 ng L(-1). Sequential elution of mixed-mode cartridges allowed a significant reduction of matrix effects observed during electrospray ionization of basic drugs versus those measured for hydrophilic balance reversed-phase sorbents and the same mixed-mode polymer without fractionated elution. Analysis of raw wastewater samples confirmed the ubiquity of cocaine (COC), benzoylecgonine (BE), and 11-nor-9-carboxy-Δ(9)-tetrahydrocannabinol (THCCOOH) in this matrix. The capability of the above methodology to identify new illicit drugs and/or metabolites in sewage samples is also discussed. With this aim, a two step strategy is proposed. First, high-resolution MS chromatograms, acquired throughout each chromatographic run, are automatically searched against an in-house built database, a reduced list of candidate drugs is generated, and the corresponding extracted ion chromatograms are obtained. In a further LC run, the tandem mass spectrometry (MS/MS) spectra of unknown peaks are acquired using different collision energies and compared with those existing in public libraries, or interpreted, to assign the unknown peak to one of the previously selected candidates.     

Superplastic behavior of Zn–Al eutectoid alloy with 2?% Cu

The effects of deformation temperature and strain rate on the superplastic behavior of the Zn–21Al–2Cu alloy (Zinalco alloy) were investigated by uniaxial tensile tests. Results were compared with those of the Zn–22Al eutectoid alloy without Cu. It was observed that additions of 2 % Cu leads to a decrease of the maximum strain attainable from 2600 % to 1000 %. The maximum strain in Zinalco alloy is obtained at lower strain rates. The presence of Cu increases the values of flow stress up to 600 % compared with those reported in the Zn-22Al alloy. Grain size sensitivity (p), true activation energy (Q _t ), and constant A of the constitutive equation were not affected by presence of Cu unlike the stress exponent (n) which increased from 2.5 to 3.9. The main effect of Cu was to decrease the plastic flow stability of the Zn–22Al alloy. The results indicate that presence of Cu in the Zinalco alloy causes a hardening effect at low strain rates leading to a decrease in the strain rate sensitivity which promotes the formation and growth of sharp necks. Microstructural characterization suggests that the large deformations at necking could possibly be due to the substantial elongation capability of the Zn-rich phase (η).     

Compressive Viscoplastic Response of 6082‐T6 and 7075‐T6 Aluminium Alloys Under Wide Range of Strain Rate at Room Temperature: Experiments and Modelling

Abstract: In this work, the viscoplastic behaviour of 6082‐T6 and 7075‐T6 aluminium alloys is examined over a wide range of strain rates. Three different testing techniques were applied to this investigation: low‐rate experiments were performed using a regular servo‐hydraulic testing machine, high‐rate tests were conducted using a split Hopkinson bar apparatus and very‐high‐rate experiments were carried out using a miniaturised direct impact test arrangement. The latter testing set‐up allowed for the characterisation of material flow at strain rates up to . These experimental results showed a sharp increase in the rate sensitivity of the materials once a threshold loading rate of is exceeded. This behaviour may be attributed to the presence of viscous drag on high‐velocity dislocation motion. In addition, the thermo‐viscoplastic behaviour of the 6082‐T6 and 7075‐T6 aluminium alloys was analytically described using the extended Rusinek–Klepaczko model of viscous drag effects. Satisfactory correlation was observed between the experiments and the constitutive model results over the entire range of strain rates studied,      

Structuration and integration of magnetic nanoparticles on surfaces and devices

Different experimental approaches used for structuration of magnetic nanoparticles on surfaces are reviewed. Nanoparticles tend to organize on surfaces through self-assembly mechanisms controlled by non-covalent interactions which are modulated by their shape, size and morphology as well as by other external parameters such as the nature of the solvent or the capping layer. Further control on the structuration can be achieved by the use of external magnetic fields or other structuring techniques, mainly lithographic or atomic force microscopy (AFM)-based techniques. Moreover, results can be improved by chemical functionalization or the use of biological templates. Chemical functionalization of the nanoparticles and/or the surface ensures a proper stability as well as control of the formation of a (sub)monolayer. On the other hand, the use of biological templates facilitates the structuration of several families of nanoparticles, which otherwise may be difficult to form, simply by establishing the experimental conditions required for the structuration of the organic capsule. All these experimental efforts are directed ultimately to the integration of magnetic nanoparticles in sensors which constitute the future generation of hybrid magnetic devices.     

Chitosan/poly(dl,lactide-co-glycolide) scaffolds for tissue engineering

Chitosan/poly(dl-lactide-co-glycolide) (Ch/dl PLG) composite scaffolds were fabricated by freeze-drying lyophilization, and were evaluated and compared for use as a bone regeneration scaffold through measurements of the compression mechanical properties of the porous scaffolds. Also, In vitro cell culture of Sprague?CDawley rat??s osteoblasts were used to evaluate the phenotype expression of cells in the scaffolds, characterizing the cellular adhesion, proliferation and alkaline phosphatase activity. The gene expression of osteocalcin, sialoprotein, alkaline phosphatase, Type I collagen and TGF??1 were confirmed in the samples; moreover, it was confirmed, the mineralization by IR spectra and EDS analysis. Our results thus show that Ch/dl PLG scaffolds are suitable for biological applications.     

Synthesis and stability of α-tricalcium phosphate doped with dicalcium silicate in the system Ca3(PO4)2–Ca2SiO4

The aim of this study was to synthesize materials of α-tricalcium phosphate doped with small amounts of dicalcium silicate, by solid state reaction, at high temperature and slow cooling to room temperature. The obtained materials were characterized by X-ray diffraction, Scanning Electron Microscopy and Fourier Transform Infrared Spectroscopy, showing that there is a region between 0.5 and 4.0 wt.% of dicalcium silicate where solid solution α-tricalcium phosphate (α-TCPss) is stable to room temperature.     

Estimation of biological properties by means of chromatographic systems: evaluation of the factors that contribute to the variance of biological-chromatographic correlations

The performance of chromatographic systems to emulate biological systems is evaluated in terms of the precision that can be achieved. The variance obtained when biological parameters are correlated against physicochemical ones can be decomposed in three terms: the variance of the biological data, the variance of the physicochemical data, and the variance caused by the dissimilarity between the two correlated systems (biological and physicochemical). The three terms contribute to the overall variance observed when measurements in chromatographic systems are correlated with experimental biological properties. The Abraham linear free energy relationships (LFERs) provide a very good approach to characterize biological and physicochemical systems and thus the variance of the analyzed data and the similarity/dissimilarity between them. The contribution of the three variances to the precision of the biological parameter estimated in this way is evaluated from the characterization of the biological and chromatographic systems by means of the Abraham model. The proposed method is able to estimate the goodness of chromatographic systems to predict particular biological properties. In particular, this method is illustrated by comparison of toxicity data (-log LC(50)) for the fish fathead minnow with retention data (log k) in several micellar electrokinetic chromatography (MEKC) systems and also by correlations between retention data (log k) in the sodium taurocholate (STC) MEKC system and data of several biological systems.     

Prescription for experimental determination of the dynamics of a quantum black box

Abstract

We give an explicit way to experimentally determine the evolution operators which completely describe the dynamics of a quantum-mechanical black box: an arbitrary open quantum system. We show necessary and sufficient conditions for this to be possible and illustrate the general theory by considering specifically one-and two-quantum-bit systems. These procedures may be useful in the comparative evaluation of experimental quantum measurement, communication and computation systems.