Influence of pressurised cryogenic nitrogen technology on Arthrospira platensis (spirulina) preservation during storage

In this study, preservation of spirulina using the new pressurised cryogenic nitrogen technology (PCN) was compared to classical methods used in laboratories and industry. Spirulina morphology was better preserved by PCN compared to unpressurised cryogeny and classical freezing at −20 °C that led to cells fragmentation. A 25% loss of Phycocyanin-C content against 60% were measured after 98 days storage for 6-Bar PCN process and frozen samples, respectively. The Total AntiOxidant Power (PAOT Liquid Technology^®) was used for determination of total antioxidant and oxidant power of spirulina extracts. PAOT value of PCN samples was 50% higher than the frozen sample. From ABTS measurements on PCN spirulina fractions sonicated or not, it was suggested that pressurisation at 6 bars allowed a better preservation of free antioxidants (outside the cells) due to replacement of oxygen by nitrogen in the frozen beads. After dehydration, phycocyanin-C content variation during storage at 20 °C and 33% RH showed higher loss for freeze-dried spirulina treated at 0 compared to 6 Bars.     

Quantitative Analysis of Tau-Microtubule Interaction Using FRET

The interaction between the microtubule associated protein, tau and the microtubules is investigated. A fluorescence resonance energy transfer (FRET) assay was used to determine the distance separating tau to the microtubule wall, as well as the binding parameters of the interaction. By using microtubules stabilized with Flutax-2 as donor and tau labeled with rhodamine as acceptor, a donor-to-acceptor distance of 54 ± 1 Å was found. A molecular model is proposed in which Flutax-2 is directly accessible to tau-rhodamine molecules for energy transfer. By titration, we calculated the stoichiometric dissociation constant to be equal to 1.0 ± 0.5 µM. The influence of the C-terminal tails of αβ-tubulin on the tau-microtubule interaction is presented once a procedure to form homogeneous solution of cleaved tubulin has been determined. The results indicate that the C-terminal tails of α- and β-tubulin by electrostatic effects and of recruitment seem to be involved in the binding mechanism of tau.     

Influence of flour blend composition on fermentation kinetics and phytate hydrolysis of sourdough used to make injera

The influence of cereal blends, teff–white sorghum (TwS), barley–wheat (BW) and wheat–red sorghum (WrS), on fermentation kinetics during traditional fermentation of dough to prepare injera, an Ethiopian traditional fermented pancake, was investigated in samples collected in households. Barley malt was used with BW and WrS flours. WrS- and BW-injera sourdough fermentations were characterised by a transient accumulation of glucose and maltose and a two-step fermentation process: lactic acid fermentation and alcoholic fermentation with ethanol as the main end product. Only transient accumulation of glucose was observed in TwS-injera, and equimolar concentrations of lactic acid and ethanol were produced simultaneously. Final α-galactoside concentrations were low in all sourdoughs. Phytic acid (IP6) was completely hydrolyzed in WrS and BW-injeras probably due to the combined action of endogenous malt and microbial phytases. Only 28% IP6 hydrolysis was observed in TwS injera. Ways to improve IP6 hydrolysis in TwS-injera need to be investigated.     

Influence of new thermoplastic sizing agents on the mechanical behavior of poly(ether ketone ketone)/carbon fiber composites

In this study, unidirectional poly(ether ether ketone)/carbon fiber (CF) composite sheets were elaborated with unsized, epoxy‐sized, and thermoplastic‐sized CFs by hot‐press molding. The thermoplastic sizings that we used were poly(ether imide) (PEI) and poly(ether ketone ketone) oligomer aqueous dispersions. Scanning electron microscopy observation of the composites freeze fractures showed that unlike unsized or epoxy‐sized CFs, the thermoplastic sizings improved the interaction between the fibers and the matrix. A comparative study of the mechanical relaxations by dynamic mechanical analysis was carried out on the different composites before and after immersion in kerosene. At low temperature, the PEI sizing had a significant influence on the β relaxation, particularly after kerosene immersion. The thermoplastic sizings did not modify the glass‐transition temperature but improved the kerosene resistance on the composites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42550.     

Poly(butylene succinate‐co‐butylene adipate)/polyethylene oxide blends for controlled release materials: A morphological study

Varying the formulation and processing conditions of polymer blends allows the design of materials with a large range of morphologies. Active materials embedding active compounds in a devoted phase are promising applications of such blends, offering possible various transport properties. In this study, 13 poly(butylene succinate‐co‐butylene adipate) (PBSA)/polyethylene oxide (PEO) blends were extruded in a slit die. Their morphologies were characterized by water extraction (selective PEO dissolution), FTIR spectroscopy, and differential scanning calorimetry. Transport properties were assessed by water vapor permeation and fluorescein release as model migrant. Indeed, the desorption in water of fluorescein (previously entrapped in PEO) was monitored to preliminary investigate the release properties of these materials: two morphologies were obtained (i) pseudo multilayer films made of PEO‐rich layer/PBSA‐rich layer/PEO‐rich layer and (ii) PEO nodules dispersed in the PBSA‐rich matrix for the highest PBSA contents. The first systems were erodible ones with an uncontrolled fast delivery by PEO dissolution whereas the second ones showed a controlled release by permeation through the PBSA matrix from PEO nodules. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42874.     

Heads or Tails: Genotyping of Hepatitis C Virus Concerning the 2k/1b Circulating Recombinant Form

As different hepatitis C virus (HCV) genotypes respond differently to initiated therapy, correct HCV genotyping is essential. A potential risk for misclassification of the intergenotypic HCV circulating recombinant form (CRF) 2k/1b strains exists, depending on the genotyping method used. The aim was to investigate the differences in HCV genotyping methods with regard to CRF 2k/1b and to gain insight in the prevalence of the CRF 2k/1b. Genotyping results by Versant HCV Genotype Assay were compared with nonstructural protein 5B (NS5B) sequencing. In total, from November 2001 until March 2015, 3296 serum samples were analyzed by Versant HCV Genotype Assay. As misclassified CRF is harbored among HCV genotype 2, we further focused our search on 142 (4.3%) samples positive for HCV genotype 2. On 116 (81.7%) retrieved samples, the NS5B sequencing was performed. Twelve out of the 116 retrieved samples (10.3%) were classified as CRF 2k/1b by sequencing of the NS5B region. Ten of these 12 samples were originally misclassified as genotype 2a or 2c, while 2 of them were misclassified as genotype 2. Our results show that the current prevalence of CRF 2k/1b is underestimated. The importance of correct HCV genotyping is emphasized, considering the tailored choice of treatment regimen and overall prognosis.     

Mechanical and barrier properties of cardboard and 3D packaging coated with microfibrillated cellulose

Microfibrillated cellulose (MFC) is increasingly used with cellulosic substrates and especially with paper materials. Its use with cardboard remains not reported and the study of mechanical and barrier properties of MFC‐coated cardboard has been investigated in this article. The influence of coating process as well as the effect of MFC have been highlighted by comparing different MFC‐coated cardboard samples with PE‐coated cardboard samples. MFC was coated using bar coating process. Their distribution and homogeneity onto cardboard was observed using techniques such as SEM and FE‐SEM. Tests such as oxygen and air permeability, bending stiffness, and compressive strength have been carried out. The coating process used impacts significantly cardboard properties by two opposite ways: on one hand it damages the structure cohesion of cardboard decreasing its compressive strength; on the other hand it increases its bending stiffness by increasing considerably the samples thickness. The addition of MFC counterbalances the negative effects of the coating process: bending stiffness and compressive strength are indeed improved by 30% in machine direction. On the contrary, MFC does not enhance much cardboard barrier properties, although it considerably increases their water absorption. Within a framework of packaging application, MFC will rather have consequent effects on cardboard's properties as blend or as part of the multilayer structure. Other applications have to be considered for its use as top layer. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40106.     

Molecular Networking for Drug Toxicities Studies: The Case of Hydroxychloroquine in COVID-19 Patients

Using drugs to treat COVID-19 symptoms may induce adverse effects and modify patient outcomes. These adverse events may be further aggravated in obese patients, who often present different illnesses such as metabolic-associated fatty liver disease. In Rennes University Hospital, several drug such as hydroxychloroquine (HCQ) have been used in the clinical trial HARMONICOV to treat COVID-19 patients, including obese patients. The aim of this study is to determine whether HCQ metabolism and hepatotoxicity are worsened in obese patients using an in vivo/in vitro approach. Liquid chromatography high resolution mass spectrometry in combination with untargeted screening and molecular networking were employed to study drug metabolism in vivo (patient’s plasma) and in vitro (HepaRG cells and RPTEC cells). In addition, HepaRG cells model were used to reproduce pathophysiological features of obese patient metabolism, i.e., in the condition of hepatic steatosis. The metabolic signature of HCQ was modified in HepaRG cells cultured under a steatosis condition and a new metabolite was detected (carboxychloroquine). The RPTEC model was found to produce only one metabolite. A higher cytotoxicity of HCQ was observed in HepaRG cells exposed to exogenous fatty acids, while neutral lipid accumulation (steatosis) was further enhanced in these cells. These in vitro data were compared with the biological parameters of 17 COVID-19 patients treated with HCQ included in the HARMONICOV cohort. Overall, our data suggest that steatosis may be a risk factor for altered drug metabolism and possibly toxicity of HCQ.