Response of a direct methanol fuel cell to fuel change

Methanol and ethanol have recently received much attention as liquid fuels particularly as alternative ‘energy-vectors’ for the future. In this sense, to find a direct alcohol fuel cell that able to interchange the fuel without losing performances in an appreciable way would represent an evident advantage in the field of portable applications. In this work, the response of a in-house direct methanol fuel cell (DMFC) to the change of fuel from methanol to ethanol and its behaviour at different ambient temperature values have been investigated. A corrosion study on materials suitable to fabricate the bipolar plates has been carried out and either 316- or 2205-duplex stainless steels have proved to be adequate for using in direct alcohol fuel cells. Polarization curves have been measured at different ambient temperature values, controlled by an experimental setup devised for this purpose. Data have been fitted to a model taking into account the temperature effect. For both fuels, methanol and ethanol, a linear dependence of adjustable parameters with temperature is obtained. Fuel cell performance comparison in terms of open circuit voltage, kinetic and resistance is established.     

Effect of the impact angle on the breakage of agglomerates: a numerical study using DEM

The study of agglomerate strength is of vital importance in several industrial applications such as pharmaceutical, detergent and food manufacturing. Agglomerates could experience a size reduction during the production and handling processes due to collisions with other agglomerates or with the moving components and walls as well as during bulk flow due to shear deformation. In this analysis, we focus on the agglomerate damage due to oblique impact on walls, as this is a common damage process during, for example, pneumatic conveying and size reduction in pin mills.

Computer simulations have been carried out using Distinct Element Analysis, where the breakage characteristics of oblique impacts and the effect of the interparticle bond strength have been analysed. The procedure adopted here provides an isotropic and spherical agglomerate (uniform mass distribution and coordination number within radial segments of the agglomerate). The results indicate that the damage ratio (i.e. the number fraction of the broken bonds) depends on the normal component of the impact velocity only, i.e. the tangential component has little effect. However, the position of the clusters produced on impact does depend on the impact angle, which influences the pattern of breakage and in turn the size distribution of the large clusters.     

Analytical solution of coupled stress-flow-transport processes in a single rock fracture

A closed-form solution is presented for modeling the coupled stress-flow-transport processes along a single fracture embedded in a porous rock matrix. Necessary assumptions were made to simplify the subject into a two-dimensional (2D) problem, considering the changes of fracture aperture and matrix porosity under various stress conditions. The cubic law was assumed to be valid for the fluid flow in the fracture, with an impermeable rock matrix. For transport mechanisms, advective transport along the fracture, longitudinal hydrodynamic dispersion in the flow direction, and the matrix diffusion were considered in three different transport models under constant concentration or constant flux (Danckwerts') inlet boundary conditions. This analytical solution can be used as a constitutive model, or as an example for validation of similar constitutive models, for modeling the coupled hydro-mechanical-chemical (HMC) processes in fracture networks of crystalline rocks. The influences of stress/deformation processes on different transport mechanisms in a single fracture under different inlet boundary conditions were studied for the first time. The results show that changes of fracture, as controlled by a combination of normal closure and shear dilatancy, have a significant influence on the solute concentration distribution both along the fracture and in the rock matrix, as well as on the solute residence/breakthrough time, especially when shear-induced dilatancy occurs. Under compressions, the decreasing matrix porosity slightly increases the solute concentration along the fracture and in the rock matrix.     

Catalytic oxidation with Al-Ce-Fe-PILC as a post-treatment system for coffee wet processing wastewater

The effluent from the anaerobic biological treatment of coffee wet processing wastewater (CWPW) contains a non-biodegradable compound that must be treated before it is discharged into a water source. In this paper, the wet hydrogen peroxide catalytic oxidation (WHPCO) process using Al-Ce-Fe-PILC catalysts was researched as a post-treatment system for CWPW and tested in a semi-batch reactor at atmospheric pressure and 25 °C. The Al-Ce-Fe-PILC achieved a high conversion rate of total phenolic compounds (70%) and mineralization to CO(2) (50%) after 5 h reaction time. The chemical oxygen demand (COD) of coffee processing wastewater after wet hydrogen peroxide catalytic oxidation was reduced in 66%. The combination of the two treatment methods, biological (developed by Cenicafé) and catalytic oxidation with Al-Ce-Fe-PILC, achieved a 97% reduction of COD in CWPW. Therefore, the WHPCO using Al-Ce-Fe-PILC catalysts is a viable alternative for the post-treatment of coffee processing wastewater.     

Verification and validation of an intelligent tutorial system

This paper presents the results of a verification and validation process for an intelligent system. The system being studied is an Intelligent Tutorial that employs fuzzy logic and multiagent systems. Software engineering techniques were used in the verification process, while the validation exploited both qualitative and quantitative techniques.     

Acid-catalyzed etherification of bio-glycerol and isobutylene over sulfonic mesostructured silicas

Sulfonic-acid-functionalized mesostructured silicas have demonstrated an excellent catalytic behavior in the etherification of glycerol with isobutylene to yield tert-butylated derivates. Di-tert-butylglycerols (DTBG) and tri-tert-butylglycerol (TTBG) have shown to be valuable fuel additives leading to decreases in the emission of particulate matter, hydrocarbons, carbon monoxide and unregulated aldehydes. Likewise, said ethers can also act as cold flow improvers for use in biodiesel, reducing also its viscosity. The activities and selectivities achieved over sulfonic acid-functionalized mesostructured silicas are comparable or even superior to those displayed by widely used macroporous commercial acid resins. Under optimized reaction conditions, these mesostructured catalysts yield a complete glycerol conversion with a combined selectivity towards DTBG and TTBG up to ca. 90%. Furthermore, no formation of undesirable isobutylene oligomers is observed. The acid strength of the sulfonic acid sites has also been found to be an important factor affecting the catalytic performance of these materials.