A new application of giant reed waste material for ammonium removal

Excess nitrogen is one of the main causes of eutrophication in water bodies. In this study, the undesirable agricultural lignocellulosic material giant reed was used to remove ammonium ions from aqueous solutions. Batch experiments were conducted to investigate the effect of various parameters such as contact time, initial ammonium concentration, adsorbent dosage, pH, particle size, agitation rate and phosphate coexisting during the ammonium adsorption process. The ammonium sorption capacity of fibrous giant reed (FGR) at equilibrium was 12.49?mg?N/g with a maximum removal efficiency of 76% observed within 30?min at pH range of 6.5–9.5. Results revealed that the Freundlich isotherm model fitted better with the sorption process than the Langmuir model, and the adsorption process was well described by pseudo-second-order kinetic model. FT-IR analyses indicated that complexation and ion exchange could be the main mechanisms for the ammonium removal by FGR. Results revealed that FGR has a sorption capacity comparable to that of other natural sorbents with the advantage of greater availability with no cost.     

Kinetic study for phosphate removal from water by recycled date-palm wastes as agricultural by-products

The presence of excessive amounts of nutrients including phosphates in water is undesirable. They cause the deterioration of water quality and problems in many natural and engineering systems. The recycling of agricultural waste materials as biosorbents for contaminants removal provides a cheap and ecological means to reduce wastes. This study explored the use of date palm wastes for the effective removal of phosphate from aqueous solutions. Granular date stones (GDS) and palm surface fibres (PSF) as raw abundant waste materials were examined for PO₄ ^-3 removal from aqueous solution. The experimental work was performed in a batch mode to investigate the influence of initial phosphate concentration, contact time, and pH of solution on phosphate biosorption. The FT-IR spectra for the waste materials display many adsorption peaks, confirming the complex nature of the GDS and PSF. Phosphate percentage removal up to 87 and 85% were obtained at initial PO₄ ^-3 concentration of 50 mg as P/L using GDS and PSF, respectively. Due to their low cost and high capability, these types of waste can be used for cost-effective removal of phosphate from wastewater.     

Optimization of the Geometries of Biconical Tapered Fiber Sensors for Monitoring the Early‐Age Curing Temperatures of Concrete Specimens

In this article, a geometrical optimization procedure using biconical tapered fiber sensors is proposed for monitoring the early‐age curing temperatures of concrete specimens. The geometries of the sensors are theoretically optimized by the ray‐tracing theory. The results of the theoretical analysis show that the performance of the sensors is heavily influenced by Evanescent Waves, which are due to the tunneling rays and are fully escaped by tapering the fiber. The effects of the geometrical parameters, including the taper ratios, taper lengths, and ray launch angles, as well as the surrounding temperatures, on the behavior of the sensors are studied numerically. The numerical results demonstrate that higher performance of the proposed optimized sensors can be achieved by a longer taper length and smaller taper ratio combined with an initial ray launching angle of 0.01 rad. An experimental study on early‐age curing temperature monitoring of concrete specimens with the biconical tapered fiber sensors was carried out. The experimental measurements agree well with the theoretical results.     

Exploiting the Plackett–Burman design to examine the formulation effect on curing characteristics of oil palm ash-filled acrylonitrile butadiene rubber compounds

The present paper is focused on exploiting Plackett–Burman design to examine the formulation effect of various chemical components content on the curing characteristics of oil palm ash (OPA)-filled acrylonitrile butadiene rubber (NBR) compound. The filled-NBR compound was prepared by conventional laboratory-sized two roll mill and cured using sulfuric system. Six independent variables such as content of zinc oxide, stearic acid, N-isopropyl-N′-phenyl-p-phenylenediamine, N-cyclohexyl-2-benzothiazole sulfenamide (CBS), sulfur, and even OPA filler were carried out to screen their significant effect on the curing characteristics of NBR compound. The scorch time, optimal cure time, minimum torque, and maximum torque were selected as a response. Results showed that the scorch time and the optimal cure time were significantly affected by CBS, whereas the minimum torque and maximum torque were significantly affected by OPA and sulfur, respectively, within the studied range. Among the chemical components under study, zinc oxide and stearic acid had the least effect on the curing properties of NBR compound. Analysis of variances for all factorial models demonstrated that the model was significant with P value <0.05 while the regularity (R ²) of all models was greater than 0.9. Lastly, the optimal chemical concentrations were predicted to acquire the optimal condition of the curing system for filled-NBR compound.     

Bio-inerte Implantatkeramiken Teil III. Zur pulvertechnologischen Verdichtung nanoskaliger Feinstpulver aus dem Al2O3-SiO2-TiO2-System

Bioinert implant ceramics Part III. The powder-technological densification of nanoscaled ultra-fine powders of the Al₂O₃-SiO₂-TiO₂-system The characterization and densification of different nanoscaled power compositions out of the Al₂O₃-SiO₂-TiO₂-system is described, which have been produced by the hydrolysis- and/or sol-gel-method. Beside their chemical composition their morphology, specific surfaces and densities before and after pressure application as well as sintering are measured and the effect of drying and calcination is investigated separately. The results provide clearly

• that drying parameters do not have any relevant influence on densification
• that calcination at 1273 K/3 h leads to agglomerated powders free of humid constituents
• that the specific surfaces of the powders as well as their density decrease with increasing SiO₂-content and increase with increasing Al₂O₃- and TiO₂-content
• that agglomeration does not disadvantageously effect the densification, but that favorized concentration regions exist which provide high-dense, crack-free sintered pellets.

     

The Plasminogen–Activator Plasmin System in Physiological and Pathophysiological Angiogenesis

Angiogenesis is a process associated with the migration and proliferation of endothelial cells (EC) to form new blood vessels. It is involved in various physiological and pathophysiological conditions and is controlled by a wide range of proangiogenic and antiangiogenic molecules. The plasminogen activator–plasmin system plays a major role in the extracellular matrix remodeling process necessary for angiogenesis. Urokinase/tissue-type plasminogen activators (uPA/tPA) convert plasminogen into the active enzyme plasmin, which in turn activates matrix metalloproteinases and degrades the extracellular matrix releasing growth factors and proangiogenic molecules such as the vascular endothelial growth factor (VEGF-A). The plasminogen activator inhibitor-1 (PAI-1) is the main inhibitor of uPA and tPA, thereby an inhibitor of pericellular proteolysis and intravascular fibrinolysis, respectively. Paradoxically, PAI-1, which is expressed by EC during angiogenesis, is elevated in several cancers and is found to promote angiogenesis by regulating plasmin-mediated proteolysis and by promoting cellular migration through vitronectin. The urokinase-type plasminogen activator receptor (uPAR) also induces EC cellular migration during angiogenesis via interacting with signaling partners. Understanding the molecular functions of the plasminogen activator plasmin system and targeting angiogenesis via blocking serine proteases or their interactions with other molecules is one of the major therapeutic strategies scientists have been attracted to in controlling tumor growth and other pathological conditions characterized by neovascularization.     

Study of the Blast Wave Parameters from Small Scale Explosions

Although the science of blast overpressure is well understood there are major difficulties in obtaining accurate values for peak overpressure, positive duration, and positive impulse. These parameters are required to assess damage potential of blast overpressures. This paper describes the problems associated with such measurements and how the problems can be overcome by the use of known analytical techniques based on the modified Friedlander equation. Other methods used include curve smoothing of the pressure-time history and integration to obtain impulse values through which the curve decay parameter can be found. Several different analytical methods are compared. The experiments have been carried out on small charges (200 g and 400 g) and the results obtained analysed to assess far-field distances for such charges. This has been achieved by comparing peak overpressure values with the scaled distance.     

Some Studies on Starch Carbamate

Starch carbamate was prepared by reacting maize starch with urea using solid state technique. The different factors affecting this reaction were studied. These factors include urea concentration, type of starch, reaction and duration. The carbamate extent and carbamation reaction efficiency (%) were traced by estimating the nitrogen content of the reaction product. Solubility, viscosity and total ester content of starch carbamate samples were estimated. The carbamate extent increases by increasing urea concentration as well as reaction temperature and duration. Increasing the reaction temperature and duration has the same effect on carbamation reaction efficiency (%), while increasing urea concentration do the reverse. The solubility (%) of starch carbamate samples depends on urea concentration, reaction temperature and duration as well as the type of starch used. The maximum solubility obtained was 63% and 43% for starch carbamate derived from pregelled and native starch, respectively. Tentative mechanism for the reaction between starch and urea has been proposed.     

Modification of Silica Nanoparticles with Cysteine or Methionine Amino Acids for the Removal of Uranium (VI) from Aqueous Solution

Silicon - Silica nanoparticles (SiO2-NPs), modified silica nanoparticles with cysteine (SiO2-Cys) or methionine (SiO2-Meth) were used for sorption of uranium (VI) ion from aqueous solution. Silica...