Electronically controlled oscillator with linear frequency adjusting for four‐phase or differential quadrature output signal generation

This paper introduces novel four‐phase oscillator employing two Dual‐Output Controlled Gain Current Follower Buffered Amplifiers (DO‐CG‐CFBAs), single Current Amplifier, three resistors, and two grounded capacitors suitable for differential quadrature signal production (floating outputs). To control the frequency of oscillation (FO) and condition of oscillation (CO), only the current gain adjustment of active elements is used. The circuit was designed by well‐known state variable approach. The oscillator employs three active elements for linear control of FO and to adjust CO and provides low‐impedance voltage outputs. Furthermore, two straightforward ways of automatic amplitude gain control were used and compared. Active elements with very good performance are implemented to fulfill required features. Suitable CMOS implementation of introduced DO‐CG‐CFBA was shown. Important characteristics of the designed oscillator were verified experimentally and by PSpice simulations to confirm theoretical and expected presumptions. Copyright © 2013 John Wiley & Sons, Ltd.     

Effect of fuels and domestic heating appliance types on emission factors of selected organic pollutants

This study reports on the first complex data set of emission factors (EFs) of selected pollutants from combustion of five fuel types (lignite, bituminous coal, spruce, beech, and maize) in six different domestic heating appliances of various combustion designs. The effect of fuel as well as the effect of boiler type was studied. In total, 46 combustion runs were performed, during which numerous EFs were measured, including the EFs of particulate matter (PM), carbon monoxide, polyaromatic hydrocarbons (PAH), hexachlorobenzene (HxCBz), polychlorinated dibenzo-p-dioxins and furans (PCDD/F), etc. The highest EFs of nonchlorinated pollutants were measured for old-type boilers with over-fire and under-fire designs and with manual stoking and natural draft. Emissions of the above-mentioned pollutants from modern-type boilers (automatic, downdraft) were 10 times lower or more. The decisive factor for emission rate of nonchlorinated pollutants was the type of appliance; the type of fuel plays only a minor role. Emissions of chlorinated pollutants were proportional mainly to the chlorine content in fuel, but the type of appliance also influenced the rate of emissions significantly. Surprisingly, higher EFs of PCDD/F from combustion of chlorinated bituminous coal were observed for modern-type boilers (downdraft, automatic) than for old-type ones. On the other hand, when bituminous coal was burned, higher emissions of HxCBz were found for old-type boilers than for modern-type ones.     

Rhizosphere characteristics of the arsenic hyperaccumulator Pteris vittata L. and monitoring of phytoremoval efficiency

Recently discovered As-hyperaccumulator ferns hold promise for phytoremediation of As-polluted soils. We investigated changes in the rhizosphere characteristics of Pteris vittata (Chinese Brake fern) relevant for its use in phytoextraction. Plants were grown in rhizoboxes filled with soil containing 2270 mg kg(-1) As. Dissolved organic carbon (DOC) concentrations in rhizosphere soil solution were increased by 86% and appeared to enhance total Fe solubility due to complexation reactions. Despite substantial removal of As by the fern, As was not significantly decreased in the rhizsophere soil solution after one cropping, apparently due to the large buffer capacity of the soil and possibly because of ion competition with DOC. However, the difference between 0.05 M (NH4)2SO4-extractable labile As in bulk and rhizosphere soil accounted for 8.9% of total As accumulated in the fern, indicating that As was mainly acquired from less available pools. Moreover, As depletion in the rhizosphere and limited resupply from less available pools were indicated by a 19.3% decreased As flux, measured using the technique of diffusive gradients in thin films (DGT). Modeling of the DGT-soil system was able to show that the rate of release from solid phase to solution in the rhizosphere was one-third of that in the bulk soil. Applying the remedial strategy of bioavailable contaminant stripping, which aims at diminishing the phytoavailable pollutant fraction, DGT can be used as a monitoring tool to evaluate the efficiency of phytoextraction and to study the potential resupply of bioavailable pools after phytoextraction has ceased.     

Effects of ceramic-based CrN,TiN, and AlCrN interlayers on wear and friction behaviors of AlTiSiN+TiSiN PVD coatings

In this study, the wear and friction behavior of cathodic arc physical vapor deposited AlTiSiN+TiSiN coatings on H13 tool steels were investigated by using CrN, TiN and AlCrN interlayers with tribometer tests both under unlubricated and boundary lubricated conditions. 6 mm alumina balls were used as counter surfaces to test ceramic hard coatings. Surface coatings were characterized through nanoindentation, scanning electron microscopy coupled with an energy-dispersive X-ray spectrometer (SEM/EDXS), optical profilometry, and atomic force microscopy (AFM) techniques. The results showed that especially AlTiSiN+TiSiN coating with TiN interlayer resulted in a much more enhanced tribological performance of the tool steels at both unlubricated and the boundary lubricated conditions even at elevated contact pressures.     

Electron microscopy and nitrogen adsorption studies of film-type carbon replicas with large pore volume synthesized by using colloidal silica and SBA-15 as templates

Mesoporous carbons synthesized by the film-type replication of colloidal silica and SBA-15 templates are studied by electron microscopy and nitrogen adsorption. This synthesis strategy involves the formation of thin carbon film on the pore walls of these templates using resorcinol-crotonaldehyde polymer as carbon precursor. For the silica templates consisting of 20-80 nm colloids this synthesis affords carbons with extremely large pore volumes (5-9 cm³/g) and uniform spherical pores reproducing the size of the colloids used.     

Hybrid Materials Based on Magnetic Iron Oxides with Benzothiazole Derivatives: A Plausible Potential Spectroscopy Probe

Rare diseases affect a small part of the population, and the most affected are children. Because of the low availability of patients for testing, the pharmaceutical industry cannot develop drugs for the diagnosis of many of these orphan diseases. In this sense, the use of benzothiazole compounds that are highly selective and can act as spectroscopy probes, especially the compound 2-(4′-aminophenyl)benzothiazole (ABT), has been highlighted. This article reports the design of potential contrast agents based on ABT and iron to develop a new material with an efficient mechanism to raise the relaxation rate, facilitating diagnosis. The ABT/δ-FeOOH hybrid material was prepared by grafting (N-(4’-aminophenyl) benzothiazole-2-bromoacetamide) on the surface of the iron oxyhydroxide particles. FTIR spectra confirmed the material formations of the hybrid material ABT/δ-FeOOH. SEM analysis checked the covering of nanoflakes’ surfaces in relation to the morphology of the samples. The theoretical calculations test a better binding mode of compound with iron oxyhydroxide. Theoretical findings show the radical capture mechanism in the stabilization of this new material. In this context, Fe³⁺ ions are an electron acceptor from the organic phase.     

The Role of Selected Wavelengths of Light in the Activity of Photosystem II in Gloeobacter violaceus

Gloeobacter violaceus is a cyanobacteria species with a lack of thylakoids, while photosynthetic antennas, i.e., phycobilisomes (PBSs), photosystem II (PSII), and I (PSI), are located in the cytoplasmic membrane. We verified the hypothesis that blue–red (BR) light supplemented with a far-red (FR), ultraviolet A (UVA), and green (G) light can affect the photosynthetic electron transport chain in PSII and explain the differences in the growth of the G. violaceus culture. The cyanobacteria were cultured under different light conditions. The largest increase in G. violaceus biomass was observed only under BR + FR and BR + G light. Moreover, the shape of the G. violaceus cells was modified by the spectrum with the addition of G light. Furthermore, it was found that both the spectral composition of light and age of the cyanobacterial culture affect the different content of phycobiliproteins in the photosynthetic antennas (PBS). Most likely, in cells grown under light conditions with the addition of FR and G light, the average antenna size increased due to the inactivation of some reaction centers in PSII. Moreover, the role of PSI and gloeorhodopsin as supplementary sources of metabolic energy in the G. violaceus growth is discussed.     

Lanthanide doping of Li7La3-xMxZr2O12 (M=Sm,Dy, Er,Yb; x=0.1–1.0) and dopant size effect on the electrochemical properties

Lithium-ion batteries, as one of the energy storage devices, has attracted much attention due to its remarkable characteristics. However, they pose safety challenges because of their liquid electrolytes. Solid electrolytes are one of the key candidates to tackle the safety issues in Li-ion batteries. As a solid electrolyte, garnet-type Li₇La₃Zr₂O₁₂ is a promising candidate with its high stability against lithium metal and wide electrochemical window among its counterparts. But, the ionic conductivity is yet to be compared with liquid electrolytes. Hence, doping is still the common strategy to adjust the ionic conductivities. Despite the fact that doping with various elements is well-documented, Lanthanide group element doping is not thoroughly investigated. This research is to study the synthesis of garnet-type Li₇La_3-xM_xZr₂O₁₂ (M = Sm, Dy, Er, Yb; x = 0.0–1.0) novel compositions to enlighten the effect of lanthanide group element doping as a function of ionic radius. Results showed that increasing dopant ionic radius improves densification, diminishes Li-ion conduction and, except Yb case, expands the lattice. However, impurity phases formed when the solubility limit is reached, has overall a positive impact on Li-ion conduction. The highest ionic conductivity (0.15 mS/cm) and lowest activation energy (0.18 eV) without impurity phases were obtained from Yb doped LLZO. It was also found that the presence of LiDyO₂ improves the ionic conductivity to 0.16 mS/cm.