Alteration in adrenocortical function in horses with recurrent airway obstruction after aerosol and parenteral administration of beclomethasone dipropionate and dexamethasone, respectively

OBJECTIVE: To determine alteration in adrenocortical function in horses with recurrent airway obstruction (heaves) after aerosol and parenteral administration of beclomethasone dipropionate and dexamethasone, respectively. ANIMALS: 6 horses with inducible and reversible heaves. PROCEDURE: Episodes of heaves were induced by exposure to moldy hay and straw for 7 days (natural challenge). Horses then underwent treatment (aerosolized beclomethasone, parenterally administered dexamethasone, and aerosolized propellant) for 7 days. Horses remained in the mold-contaminated environment for 7 days after discontinuation of drugs. Adrenocortical function was determine by serial evaluation of cortisol concentration in serum obtained on days 0, 7, 9, 12, 14, 16, 19, and 21. Adrenocorticotropic hormone stimulation testing was performed in 4 horses/treatment group on days 0, 7, 14, and 21. RESULTS: Endogenous cortisol production was suppressed in beclomethasone- and dexamethasone-treated horses within 2 days of treatment but recovered to values similar to those in propellant-treated horses approximately 2 and 4 days after discontinuation of drugs. Serum cortisol concentration in propellant-treated horses gradually decreased during the study and was significantly lower than baseline on days 14, 16, 19, and 21. Mean increase in serum cortisol concentration in response to ACTH stimulation testing after beclomethasone and dexamethasone administration did not differ significantly from the response observed in propellant-treated horses. CONCLUSIONS: Aerosol and parenteral administration of beclomethasone and dexamethasone, respectively, suppressed adrenocortical function; however, endogenous cortisol production resumed approximately 2 and 4 days after discontinuation of drugs. Responsiveness to ACTH stimulation testing was not affected by the 7-day treatment period.     

Polarizability of gyrotropic sphere

The polarizability of gyrotropic spheres is studied in this short article. Gyrotropic media are anisotropic in two respects: the symmetric part of the permittivity dyadic is uniaxial, and furthermore, there is also antisymmetric part in the permittivity. The polarizability is also dyadic with its components depending on the relations of the permittivity components of the material.     

Influence of dissolved organic matter and Fe(II) on the abiotic reduction of pentachloronitrobenzene

Nitroaromatic pesticides (NAPs) are hydrophobic contaminants that can accumulate in sediments by the deposition of suspended solids from surface waters. Fe(II) and dissolved organic matter (DOM), present in suboxic and anoxic zones of freshwater sediments, can transform NAPs in natural systems. We studied the reduction of pentachloronitrobenzene (PCNB) to pentachloroaniline (PCA) in controlled studies using Fe(II) and surface water DOM isolates from Pony Lake, Antarctica, and Suwannee River, GA, in unfiltered and 0.45 microm filtered solutions. We observed rapid reduction of PCNB to PCA in the presence of Fe(II) and DOM (t(1/2) approximately = 30 min to 4 h) and very limited reduction in DOM-only systems. DOM in unfiltered systems inhibited iron colloid formation and potentially limited the formation of reactive Fe(ll)-iron colloid surface complexes, causing reductive transformation in Fe(II)-DOM media to be slower in some cases relative to Fe(ll)-only controls. Conversely, in 0.45 microm filtered solutions, PCNB reduction in Fe(III)-DOM media was faster than the Fe(II)-only controls, suggesting that DOM enhances the reductive capacity of Fe(ll) in the absence of iron colloids. This work shows that DOM may significantly affect the reactivity of Fe(ll) toward NAPs under suboxic and anoxic conditions in natural wetland sediments.     

IMPROVEMENTS IN THE SURFACE CHARACTERISTICS OF STAINLESS STEEL WORKPIECES BY BURNISHING WITH AN AMORPHOUS DIAMOND-COATED TIP

Burnishing is a cold working process that can be used to improve surface finish and surface hardness of workpieces. Conventionally, diamond or hard metal burnishing tools are used. In the present work, a novel burnishing tool was created by depositing amorphous diamond coating (AD) on a stainless steel tip. This tool was used to improve the surface finish and surface hardness of Nitronic-50 HS stainless steel workpieces. Nitronic-50 HS is used in a wide range of applications in industry. The burnishing process was carried out at different burnishing parameters (force, revolution speed, feed and number of tool passes). Burnishing parameters had a significant effect on the finishing process and they had to be optimized to achieve the best results. Remarkable improvements in surface finish (70% decrease in roughness) and hardness (25% increase) could be achieved with this tool and process in the surface finishing of Nitronic-50 stainless steel workpieces. From the tribological point of view, the AD-coated tip performed slightly better than a corresponding tip modified from a commercial polycrystalline diamond tip. AD coating seems to be very suitable for use in mechanical surface finishing tools such as a burnishing tip.     

Expected shifts in Fusarium species' composition on cereal grain in Northern Europe due to climatic change

In Northern Europe, changes in climate may result in better growing conditions for many crops. However, the expected warmer and more humid conditions are favourable for Fusarium head blight infections on cereals. The Fusarium species prevalent in Nordic areas to date are the same as in Central Europe: F. avenaceum, F. culmorum, F. graminearum and F. poae. The prevalence of F. graminearum in cereal grain has already increased in Central Europe and is likely to increase in the North due to the expected changes in weather conditions, reduced tillage and the predicted increase in maize cultivation in Nordic countries. The possible weather extremes predispose cereals to Fusarium infections by increasing the populations of insect pests injuring plants. Adverse conditions may even create conditions suitable for F. subglutinans or F. verticilloides to infect maize and possibly other cereals in rotation in southern parts of Scandinavia. The importance of the species that infect in relatively dry conditions, F. langsethiae and F. poae, may also increase on winter cereals which are predicted to be more prevalent in future farming. If the number of crop species cultivated will increase and non-cereal crops are included in rotations effects of reduced tillage on Fusarium infections in grain could be limited. The predicted changes in climate towards 2050 are expected to slightly change Fusarium species composition in Northern Europe. An increase in F. graminearum and possibly the invasion of northern parts of Central Europe and Denmark by fumonisin producers is expected.     

Influence of frequency, grade, moisture and temperature on Green River oil shale dielectric properties and electromagnetic heating processes

Development of in situ electromagnetic (EM) retorting technologies and design of specific EM well logging tools requires an understanding of various process parameters (applied frequency, mineral phases present, water content, organic content and temperature) on oil shale dielectric properties. In this literature review on oil shale dielectric properties, we found that at low temperatures (< 200 °C) and constant oil shale grade, both the relative dielectric constant (ε′) and imaginary permittivity (ε″) decrease with increased frequency and remain constant at higher frequencies. At low temperature and constant frequency, ε′ decreases or remains constant with oil shale grade, while ε″ increases or shows no trend with oil shale grade. At higher temperatures (> 200 °C) and constant frequency, ε′ generally increases with temperature regardless of grade while ε″ fluctuates. At these temperatures, maximum values for both ε′ and ε″ differ based upon oil shale grade. Formation fluids, mineral-bound water, and oil shale varve geometry also affect measured dielectric properties. This review presents and synthesizes prior work on the influence of applied frequency, oil shale grade, water, and temperature on the dielectric properties of oil shales that can aid in the future development of frequency- and temperature-specific in situ retorting technologies and oil shale grade assay tools.     

Sugars and acids of strawberry varieties

The sugar and acid compositions of six strawberry (Fragaria×ananassa Duch.) varieties from 1997 and 1998, grown in different conditions, 26 samples in all, were investigated by GC as trimethylsilyl derivatives. The major sugars were glucose (1.89–4.52?g/100?ml), fructose (2.14–4.14?g/100?ml) and sucrose (0.90–3.87?g/100?ml), the major acids being citric (0.73–1.58?g/100?ml) and malic (0.22–0.69?g/100?ml). Total sugar content (glucose+fructose+sucrose) varied from 5.35?g/100?ml to 10.96?g/100?ml in accordance with soluble solids (°Brix). The correlation between them showed a linear regression y=0.873x-0.420, the percentage of determination of the regression model being 82.1%. Among one variety only, ‘Senga Sengana’, the percentage of the model was 86.9%. No significant differences were found between the strawberries from conventional versus those from organic farms. Contents of sugars and soluble solids were lower in varieties ‘Jonsok’ and ‘Honeoye’ than in ‘Korona’, ‘Bounty’ and ‘Polka’. The concentrations of malic acid were significantly higher in Senga Sengana, Jonsok and Bounty than in other varieties.     

Monitoring water uptake of polyurethanes by in situ fluorescence technique

The water uptake of three polyurethane adhesives was studied by an in situ fluorescence method applying extrinsic fluorescent probes. The measurements were made in water immersion at 50 and 80°C, and in water vapor at 50°C. An intensity ratio method was applied, in which ratios of the highest and lowest intensity changes in the fluorescence emission bands were used to determine the amount of water sorbed in the polymer films. The ratio method was used to compare the fluorescence data with those obtained by a conventional gravimetric method. Comparable results were obtained. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1593–1599, 2001     

Impaired absorption of cholesterol and bile acids in patients with an ileoanal anastomosis

BACKGROUND: No data exist on cholesterol absorption in patients with an ileoanal anastomosis (IAA). AIMS: To study cholesterol absorption and its effects on cholesterol and bile acid metabolism in patients with an IAA. PATIENTS AND METHODS: Cholesterol absorption, and serum, biliary, and faecal lipids were studied in 24 patients with an IAA and 20 controls. RESULTS: Fractional cholesterol absorption was significantly lower in the patients (36% versus 47% in controls). Surprisingly, the calculated intestinal influx of endogenous cholesterol was reduced so that the absolute absorption of cholesterol was decreased; elimination of cholesterol as faecal neutral steroids remained normal. Thus, the slightly increased cholesterol synthesis was mainly due to increased faecal bile acid excretion, which, in turn, was associated with reduced absorption and biliary secretion of bile acids. Serum total and low density lipoprotein (LDL) cholesterol and LDL triglycerides were lower in the patients. Molar percentage and saturation index of biliary cholesterol were slightly higher in patients with an IAA. Proportions of secondary bile acids in bile and faeces were diminished, and faecal unidentified bile acids were higher in patients. CONCLUSIONS: Cholesterol absorption is significantly impaired in patients with an IAA, and is closely related to changes in serum and biliary lipids observed in these patients.     

Effect of Relative Humidity on the Oxidative Stability of Microencapsulated Sea Buckthorn Seed Oil

ABSTRACT: The effect of relative humidity (RH) (20 °C: RH 11%, 54%) on oxidative stability microencapsulated sea buckthorn seed oil was studied using bulk oil as a reference. Microcapsules were prepared by spray-drying using maltodextrin-gum arabic (MD/GA) and corn starch sodium octenyl succinate derivate (HiCap) as the wall materials. The influence of the physical state of the wall material was also evaluated. Under dry conditions, the microencapsulated oils were most stable, but the oxidation of the bulk oil was accelerated. At 20 °C and at RH 11%, the peroxide value of the bulk oil exceeded 20 meq/kg within 1 wk. Microencapsulation prolonged the shelf-life of the oil from 1 wk to 2 mo at 20 °C, when the encapsulating matrix was in glassy state. In conditions in which the HiCap matrix was in a rubbery state (RH 54%, 20 °C), the oxidation proceeded very quickly, reaching a peroxide value of 20 meq/kg just after 1 wk. Caking and collapse of the microcapsule powder were observed in the rubbery state. At accelerated conditions (50 °C: RH 11%, 30%, 45%), the oxidation was noticeably fast, not only in the bulk oil but also in the MD/GA matrix, even in the glassy state. The behavior in the HiCap matrix was more complex as the amount of peroxides started to decrease in time. This was assigned to the structural collapse in HiCap microcapsules. The behavior of the microencapsulated oils under accelerated conditions did not correlate with their behavior at 20 °C.