A computer-based goal-oriented productivity index

This paper presents a Weighted Multi-Factor Productivity Index. This index monitors the performance of an organization and identifies productivity problems. Key resource factors are defined and a weighting technique, with both subjective and objective attributes, is presented. This productivity index is dynamic and responsive to the changing needs of an organization and is a goal oriented measuring tool.     

Evidence for the activation-controlled galvanostatic growth of thin Anode Films on Tin in some neutral media

Growth of thin transparent anode films on Sn in neutral media has been studied by measuring galvanostatic anodic charging curves in phosphate buffer, 0.1M KCl and 0.1M Na₂SO₄ solutions (pH 6.6–6.7) at low current densities. The experimental technique is essentially the same as that used in previous investigations on valve metals. Although the rise in the anode potential of Sn does not exceed 2.0 V, the shape of the anodic charging curve is identical to that observed on valve metals: being thus composed of a linear and a non-linear region. Application of the kinetics of galvanostatic anodization to the results on Sn show that: (i) the oxide formation rate is linearly related to the ionic current density i by a double logarithmic plot, (ii) the reciprocal capacity is linearly related to log i, and (iii) the Tafel behaviour is exhibited at constant charge. These relations indicate that the anode film growth occurs by an activation-controlled ion conduction under the influence of the electric field across the film phase according to an exponential law. Treatment of the results allows the estimation of some kinetic parameters of film growth, e.g.: (i) the constants a and b of the empirical relation between oxide formation rate and i, (ii) the constants A and B of the exponential law, (iii) the electric field which is of the order of 10⁶ V/cm in phosphate, and 10⁷ V/cm in both chloride and sulphate solutions, and (iv) the effective activation distance for the ionic jump over the energy barrier associated with cation transport within the film, whereupon relative (and not absolute) values can only be obtained. Comparison between the present results and previous ones (also on Sn) taken by potentiodynamic technique shows that while diffusion kinetics play an important role in the formation of thick anode films by the potentiodynamic technique, activation-controlled kinetics explain the present results on the galvanostatic formation of thin transparent anode films.     

Analyzing an inventory system with multiple reorder points and periodic replenishment

This paper investigates multiple reorder point, periodic replenishment systems similar to those utilized on board some U.S. naval vessels for Selected Item Management (SIM). This inventory system is of interest since it involves both regular and priority replenishment, three reorder points, and cyclical restocking of regular orders. A simulation model is developed to study the impact of demand distribution, cycle time, priority order leadtime, and the quantity of units ordered on the performance of the system. It is found that the frequency of service and days without shortages performance measures can be maximized by setting the reorder points at equal intervals between the zero level and the high level. Also, a power approximation model is presented that estimates the high level that will lead to a desired percent days without shortage percentage.     

Solid-State Electrodes for Multichannel Multiplexed Intracortical Neuronal Recording

Thin-film arrays of extracellular recording electrodes have been developed for use in studies of information processing in neural structures and eventual use in closed-loop control of neural prostheses. These probes consist of a silicon substrate which supports an array of thin-film conductors. The conductors are insulated above and below with deposited dielectrics. The electrode sites are defined by openings in the upper dielectric layer and are inlaid with gold to form low-impedance recording surfaces. The probes are typically 15 pim in thickness with shank widths as narrow as 20 ?m. The probe fabrication process is compatible with the inclusion of signal processing circuitry directly on the probe substrate. A 12 channel on-chip signal processor design with per-channel gain of 100, bandwidth of 100 Hz-6 kHz, multiplexed output, and recording-site impedance check capability is described. The probes have adequate strength to penetrate the gerbil pia-arachnoid layer and have recorded single neuron activity of over 500 ?V peak-to-peak from tip, side, and mid-carrier sites. Signal-to-noise ratios as high as 10:1 have been achieved. An equivalent circuit model for the conducting leads, the recording site, and the electrode-electrolyte interface is described. Development of biocompatible insulation and encapsulation materials for long-term implantation of active probes is underway.     

Output feedback control of linear two-time-scale systems

Output feedback control of linear time-invariant singularly perturbed systems is studied. The set of all compensators that stabilize a singularly perturbed system while preserving its two-time-scale structure is parameterized. The parameterization is used to show that any two-frequency-scale stabilizing compensator can be asymptotically approximated by a compensator designed via a sequential procedure. In this procedure, a fast (high-frequency) compensator is designed first to stabilize the fast model of the system. Then, a strictly proper slow (low-frequency) compensator is designed to stabilize a modified slow model. The parallel connection of the two compensators forms a two-frequency-scale stabilizing compensator for the singularly perturbed system.     

Fabrication and test of an integrated optical magic T on a glasssubstrate

In this work, we demonstrate the first implementation of an integrated optical magic T. Such structure is designed to give, at the output, the sum and the difference of its two input optical signals using the multimode interference phenomena. The structure is fabricated using the ionic exchange technology on glass. The first obtained results verify the function of the magic T     

Human Physiological Capabilities for Prolonged Manual Lifting Tasks

The objective of this study was to determine human physiological capabilities for prolonged lifting tasks performed from the floor to table height. Frequency and weight of load were the independent variables. Oxygen consumption, minute ventilation, and heart rate were the dependent variables. Physiological responses were monitored continuously for each frequency-load combination. Eleven male subjects participated in the experiments. The duration of each experimental session was controlled by the subject. Each subject was instructed to perform the lifting task continuously until he could not maintain it any longer due to complete physical exhaustion. Each subject was given 10 minutes of rest every 50 minutes of work and 1 hour for lunch after the fourth hour of work. The upper limit of lifting duration was set to 8 hours. One of the main findings obtained from this study was that a physiological fatigue limit (PFL) is a function of lifting task parameters (frequency, weight of load, and task duration). Thus, one cannot recommend a single PFL value such as 1 liter/min for lifting tasks of varied work durations.     

Preparation of ion-exchange celluloses. I. Anion exchange celluloses

Cellulose–poly(glycidyl methacrylate) graft copolymer (CPGMA) was treated with ammonia (AH), ethylamine (EA), diethylamine (DEA), and triethylamine (TEA). Factors affecting the reaction, such as reaction duration, temperature, liquor ratio, pH, and aminating agent/epoxide molar ratio were studied. A mechanism of the reaction was suggested. The anion exchange celluloses were characterized by studying its capacity, potentiometric titration, and durability to use. Potentiometric titration of the produced anion exchangers has been studied and pK_b values were found to be 6.1, 7.6, and 8.9 for DEA–CPGMA, EA–CPGMA, and AH–CPGMA, respectively.