Theory of competition between breakup and coalescence of droplets in flowing polymer blends

The Smoluchowski equation for the breakup and coalescence of dispersed droplets has been solved for flowing polymer blends. A scaling form for the distribution of droplet sized derived and published for a system of clusters with fragmentation and coagualation was used in our dervation. Equations are developed here for the average droplet size and for the characteristic time of transition to steady state flow of blends with a high content of the dispersed phase. Expressions reasonably describing the average size of droplets for all concentrations were obtained by a theory modification. Measured dependences of droplet size on the blend composition can be matched only if simultaneous collisions of three and more droplets are considered. The results of the theory indicate that the mechanism of droplet breakup (formation of pieces with the same or different volumes) has only a small effect on their average size in concentrated systems. The dependence of droplet size on the shear rate in flow is determined by properties of the blend components, and is generally nonmonotonic.     

COSMO‐based computer‐aided molecular/mixture design: A focus on reaction solvents

In this article, we investigate reaction solvent design using COSMO‐RS thermodynamics in conjunction with computer‐aided molecular design (CAMD) techniques. CAMD using COSMO‐RS has the distinct advantage of being a method based in quantum chemistry, which allows for the incorporation of quantum‐level information about transition states, reactive intermediates, and other important species directly into CAMD problems. This work encompasses three main additions to our previous framework for solvent design (Austin et al., Chem Eng Sci. 2017;159:93–105): (1) altering the group contribution method to estimate hydrogen‐bonding and non‐hydrogen‐bonding σ‐profiles; (2) ab initio modeling of strong solute/solvent interactions such as H‐bonding or coordinate bonding; and (3) solving mixture design problems limited to common laboratory and industrial solvents. We apply this methodology to three diverse case studies: accelerating the reaction rate of a Menschutkin reaction, controlling the chemoselectivity of a lithiation reaction, and controlling the chemoselectivity of a nucleophilic aromatic substitution reaction. We report improved solvents/mixtures in all cases. © 2017 American Institute of Chemical Engineers AIChE J, 63: 104–122, 2018     

Polypropylene/silica micro‐ and nanocomposites modified with poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene)

The effects of different silica loadings and elastomeric content on interfacial properties, morphology and mechanical properties of polypropylene/silica 96/4 composites modified with 5, 10, 15, and 20 vol % of poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene) SEBS added to total composite volume were investigated. Four silica fillers differing in size (nano‐ vs. micro‐) and in surface properties (untreated vs. treated) were chosen as fillers. Elastomer SEBS was added as impact modifier and compatibilizer at the same time. The morphology of ternary polymer composites revealed by light and scanning electron microscopies was compared with morphology predicted models based on interfacial properties. The results indicated that general morphology of composite systems was determined primarily by interfacial properties, whereas the spherulitic morphology of polypropylene matrix was a result of two competitive effects: nucleation effect of filler and solidification effect of elastomer. Tensile and impact strength properties were mainly influenced by combined competetive effects of stiff filler and tough SEBS elastomer. Spherulitic morphology of polypropylene matrix might affect some mechanical properties additionally. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41486.     

Acceleration of kinetic monte carlo simulations of free radical copolymerization: A hybrid approach with scaling

Kinetic Monte Carlo (KMC) has been widely used in the simulation of polymeric reactions. The power of KMC is highlighted by its ability to keep track of the length and sequence of every radical or polymer chain, while it is computationally more expensive than deterministic kinetic models. This paper introduces an acceleration method that significantly reduces the computational cost of KMC simulations, while keeping the same features as the full kinetic Monte Carlo simulations. Case studies are used to demonstrate the general applicability of this method to free radical copolymerization. © 2017 American Institute of Chemical Engineers AIChE J, 63: 4013–4021, 2017     

Experimental and calculated liquid-liquid interfacial tension in demixing metal alloys

Liquid-liquid interracial tension in binary and temary Al-based monotectic systems has been determined experimentally with a tensiometric method in a wide temperature interval. The temperature dependence of the interfacial tension is well described by a power law function of the type σαβ - （1 - T/Tc）δ with the critical exponent δ= 1.3 and a critical temperature Tc. Theoretical models describing the liquid-liquid interface in monotectic alloys and their applicability for calculation of the interfacial tension and its temperature dependence in binary systems are considered.     

Integrated material flow and radioactivity distribution methodology within the calculation tool for evaluation of parameters for decommissioning of nuclear installations

Decommissioning of nuclear facilities becomes an important issue in all areas of nuclear technology, mainly in their energetic applications. Decommissioning process has to be planned in the safe, ecological and economic manner. It determines the requirements on appropriate evaluation of needed technologies, media, amount of solid materials released into the environment, radioactivity of effluents, amount of radioactive waste for disposal, number and exposure of personnel and finally the financial demands. A detailed evaluation of these parameters may be done by analytical calculation approach. This approach models a real process of decommissioning with its individual basic activities. The methodology of integrated material flow and radioactivity distribution within this calculation evaluation tool is applied and implemented to describe the real decommissioning activities and their mutual relations to obtain more accurate outputs.     

Magnetocaloric and magneto-transport properties of Gd10Co20Si70 alloy

We report the results of magnetic, thermodynamic, transport and magnetocaloric effect (MCE) studies of newly synthesized Gd_(10)Co_(20)Si_(70) alloy. These measurements confirm an antiferromagnetic transition at T_N=9 K. Both MCE and magnetoresistance (MR) show quadratic dependence on the applied magnetic field, indicating the presence of spin fluctuations in the alloy. The maximum values of the magnetic entropy change determined from the isothermal magnetization data for magnetic field change of 7 and9 T are found to be 10.5 and 15.6 J/kg·K, respectively. As a consequence of the spin fluctuations effect, the MCE peaks are pulled towards high temperature side as asymmetrically broadened peak. The MR attains a large positive value of 73%at 2 K in 8 T. The large MR and reversible MCE make this alloy an attractive multifunctional magnetic material.     

Atmospheric emission of reactive nitrogen during biofuel ethanol production

This paper evaluates emissions to the atmosphere of biologically available nitrogen compounds in a region characterized by intensive sugar cane biofuel ethanol production. Large emissions of NH3 and NOx, as well as particulate nitrate and ammonium, occur at the harvest when the crop is burned, with the amount of nitrogen released equivalent to approximately 35% of annual fertilizer-N application. Nitrogen oxides concentrations show a positive association with fire frequency, indicating that biomass burning is a major emission source, with mean concentrations of NOx doubling in the dry season relative to the wetseason. During the dry season biomass burning is a source of NH3, with other sources (wastes, soil, biogenic) predominant during the wet season. Estimated NO2-N, NH3-N, NO3- -N and NH4+ -N emission fluxes from sugar cane burning in a planted area of ca. 2.2 x 10(6) ha are 11.0, 1.1, 0.2, and 1.2 Gg N yr(-1), respectively.