Algorithm for the retrieval of columnar water vapor from hyperspectral remotely sensed data

A new algorithm for the retrieval of columnar water vapor content is presented. The proposed procedure computes the area of the H2O absorption centered about 940 nm to allow its integrated columnar abundance as well as its density at ground level to be assessed. The procedure utilizes the HITRAN 2000 database as the source of H2O cross-section spectra. Experimental results were derived from radiometrically calibrated hyperspectral images collected by the Airborne Visible-Infrared Imaging Spectrometer (AVIRIS) sensor over the Cuprite mining district in Nevada. Numerical simulations based on the MODTRAN 4 radiative transfer code were also employed for investigating the algorithm's performance. An additional empirical H2O retrieval procedure was tested by use of data gathered by the VIRS-200 imaging spectrometer.     

High-resolution photometric optical monitoring for thin-film deposition

Real-time monitoring of thin-film deposition with high resolution is important for precise fabrication of thin-film devices in a technological environment with ever-increasing demands for smaller size and better performance. Using photometry, we were able to achieve a real-time optical monitoring resolution of film thickness that is comparable with a single atomic layer scale (i.e., subnanometer). Filtering noise efficiently and compensating for sources of error by use of an appropriate model produced this high resolution. The procedure proved reliable and can be useful in the thin-film-deposition industry.     

Low-Power Log-Domain CMOS Filter Bank for 2-D Sound Source Localization

This paper proposes the design of a novel current-mode front-end for the extraction of localization spectral cues from two audio signals, together with test results. The front-end consists of two parallel filter banks, envelope extraction and comparison circuitry, together with an AGC loop. The extracted cues are intended to be further processed in order to determine the source azimuth and elevation. A current-mode log-domain implementation using subthreshold MOS operation is used for micropower operation while still achieving a good bandwidth and linearity. A current-mode solution is also preferred because of the ease of implementation of certain mathematical operations. The front-end splits the input signals into different frequency bands and computes monaural and interaural spectral cues from the resulting signal envelopes for each band. The front-end has been optimized to operate at a supply voltage of 1.8 V and most blocks have been designed using a differential architecture. To our knowledge, this is the first log-domain implementation of a front-end for 2-D localization cues extraction. The design has been carried out using a standard double-poly double-metal 0.8 m CMOS process with V _T = 0.8 V. The bandpass filters which form the main core of the chip exhibit a measured dynamic range of 62 dB corresponding to 1.9% THD, while the total power dissipation is 890 W.     

Reliable fabrication technologies for optical resonant filters

A reliable technology for optical resonant filters can be useful for optoelectronics technologies, optical communications systems, and biomedical applications. Positioning the resonance at a specific target wavelength is challenging because of the sensitivity of placing a narrow spectral filtering window tothe error factors that are associated with the fabrication and characterization processes. We describe and prove experimentally two fabrication approaches to overcome this challenge.     

A dry process for production of microfluidic devices based on the lamination of laser-printed polyester films

A new microfabrication process based on a xerographic process is described. A laser printer is used to selectively deposit toner on a polyester film, which is subsequently laminated against another polyester film. The toner layer binds the two polyester films and allows the blank regions to become channels for microfluidics. These software-outlined channels are approximately 6 microm deep. Approximately twice this depth is obtained by laminating two printed films. The resulting devices were not significantly damaged after 24 h of exposure to aqueous solutions of H3PO4, NaOH, methanol, acetonitrile, or sodium dodecyl sulfate. Electric tests with an impedance analyzer and microchannels filled with KCl solution demonstrated that (1) wide channels suffer from deformation of the top and bottom walls due to the lamination of the polyester films and (2) the toner walls are somewhat porous. Although these drawbacks limit the maximum width of a channel and the minimum distance between two channels, the process is an attractive option to other expensive, laborious, and time-consuming methods for microchannels fabrication. The process has been used to implement devices for electrospray tip and capillary electrophoresis with contactless conductivity detection.     

Evaluation of the infrared absorption in nm-thick heavily boron-doped Si1-xGex layers on silicon

Infrared absorption due to free carriers was measured in the spectral range of 1.5–25 m at 77 and 300 K on a large variety of heavily p-doped, p⁺⁺=(2-7)×10²⁰cm^-3 strained Si_1-xGe_x quantum wells on Si grown by molecular beam epitaxy (MBE). The validity of the commonly applied theoretical approaches to describe the spectra has been thoroughly analyzed. The well-known dependence yielded by the Drude theory is not observed. Moreover, it is shown that the Boltzmann kinetic equation is invalid under our experimental conditions. The necessity of a new theory, where the interaction energy of carriers with scattering centers would be included into the energy spectrum of the system, is shown.     

Ultrasonic integrated backscatter coefficient profiling of human coronary arteries in vitro

A theoretical formulation for the profile of the integrated backscatter coefficient (IBC) is derived. This new formulation is based on a theoretical treatment. It includes correction for the diffraction of the ultrasonic beam and correction for the non-ideal nature of the reference signal. The inclusion of these correction factors permits accurate quantitative profiling of the IBC over the transducer focal zone. Experimental measurements are first performed on well-calibrated vessel-equivalent phantom materials and subsequently on human coronary arteries in vitro. A spherically focused 50.0 MHz f/1.83 transducer is used. IBC profiles are shown for three samples that are representative of early, mid, and advanced atherosclerotic coronary disease. The IBC profiles clearly differentiate the arterial tissues. However, variation between samples with histologically confirmed intimal thickening (N=24) was large. The mean IBC (±1 standard deviation), in (Sr.mm)^-1, for media, adventitia, and thickened intima were 3.86×10^-3, 1.53×10^-2, and 2.24×10^-2, respectively. The mean IBC of thickened intima is larger than previous measurements obtained from femoral arteries, and the mean IBC for media and adventitia layers are lower, reflecting differences in tissue composition between coronary and femoral vessels     

Using the Curriculum Vita to Study the Career Paths of Scientists and Engineers: An Exploratory Assessment

In this paper we assess the utility of the curriculum vita (CV) as a data source for examining the career paths of scientists and engineers. CVs were obtained in response to an email message sent to researchers working in the areas of biotechnology and microelectronics. In addition, a number of CVs were obtained "passively" from a search of the Internet. We discuss the methodological issues and problems of this data collection strategy and the results from an exploratory analysis using OLS regression and event history analysis. In sum, despite difficulties with coding and variation in CV formats, this collection strategy seems to us to hold much promise.     

Multiplierless and fully pipelined JPEG compression soft IP targeting FPGAs

This paper presents the design of a soft IP for JPEG compression targeted for high performance in a FPGA device. The JPEG compressor architecture achieves high throughput with a deep and optimized pipeline and with a multiplierless datapath architecture. The JPEG compressor architecture was designed in a hierarchical and modular fashion and the details of the global architecture and of its modules are presented in this paper. A modular and strictly structural VHDL design is followed to develop the JPEG compressor soft IP. The VHDL codes were synthesized to Altera and Xilinx FPGAs. Synthesis results and relevant performance comparisons with related works are presented. Our high throughput compressor is able to compress 39.8 millions of pixels per second when mapped onto an Altera FLEX 10KE FPGA. Our JPEG soft IP mapped to FLEX 10KE low cost FPGA is able to compress 115 images per second in SDTV resolution (720 × 480 pixels). Considering this SDTV resolution our design is worthy as a core of an M-JPEG video compressor, reaching a real time processing rate of 30 fps, once mapped to the FLEX 10KE FPGA device.