The fracture stress of chemical vapour deposited diamond

The factors which control the fracture stress of chemical vapour deposited diamond have been studied using the 3-point bend geometry. Fracture stress values of 300–800 MPa for the growth side and 600–1200 MPa for the nucleation side were recorded for samples of thickness 0.4–2.4 mm. A Weibull modulus of 23 was calculated for the growth surface data, showing that the fracture stress variability was low for a brittle material. A theory based on these results demonstrates that the material behaviour is remarkably simple, depending only on the grain size and the sample thickness, regardless of wide variations in other parameters such as optical transmission and stress state. The paper also contains a possible explanation for this well-defined behaviour based on microstress variations resulting from differences in defect density in different growth sectors within a grain.     

Variational principle of combined energy—Mechanics of laminated structures

The conventional approaches for stress analysis of composite laminates have encountered discontinuity problems. In this paper, the C¹ continuity of displacements in the in-plane directions and C⁰ continuity of displacement along the thickness direction are discussed. Also, the global continuity of transverse stresses and local continuity of in-plane stresses are examined. Then, the formulations of stress analysis in both differential equation form and variational functional form are presented.     

Income and expenditure in a spatial economy

The question explored in this paper is whether the center attracts more spending by all agents in a spatial economy than do peripheral locations, and why this might be so. This is the macroeconomics pendant to the microeconomic concern with accessibility.This paper is the result of discussions on the subject of time and space in economics with my good friend, Tonu Puu. I dedicate it to the memory of another dear friend, Claude Ponsard.     

Two-level optimal output feedback stabilizer design

Design of two-level system stabilizers is considered using an optimal reduced-order model whose state variables are torque angles and speeds. The reduced-order model retains their physical meaning and is used to design a two-level linear feedback controller that takes into account the realities and constraints of the electrical power systems. The two-level control strategy is used, and a global control signal is generated from the output variables to minimize the effect of interaction. The effectiveness of this controller is evaluated, and an example, the multimachine system, is given to illustrate the advantages of the proposed method. The responses of the system with the two-level scheme and optimal reduced order scheme are included for comparative analyses     

Improvement options for a former water-driven-mill building now used as a theatre

After investigating the financial feasibility (and so abandoning the idea) of providing self-generated electricity using hydro-power, it was recommended that the top priority should be the direct connection of an electricity supply, from the mains grid to the building; this would cost £8800. Thereby, the theatre would receive a relatively unrestricted supply of electricity at cheaper unit tariffs. This improvement should be followed by the most urgent repairs being carried out to the building fabric, at an estimated cost of £6990. These repairs are necessary to ensure the continued integrity of the building's structure, thereby inhibiting the on-going deterioration.

The energy and financial appraisal also suggested a priority listing of overall improvements to the building in order to achieve a significant, economically justifiable reduction in energy demand; the recommended options are estimated to cost in total £39819. However, the capital cost of such an upgrading would only be recouped, and the theatre achieve a sustainable future, if the building were to be used more intensively and for a wider range of activities than at present in order to increase its revenue significantly.

All prices as stated are those at August 1991.     

The influence of NaCl and CO2 on the atmospheric corrosion of magnesium alloy AZ91

The influence of NaCl and CO₂ on the atmospheric corrosion of magnesium alloy AZ91 is studied in the laboratory. Samples were exposed under carefully controlled air and flow conditions; the relative humidity was 95%, the temperature was 22.0°C and the concentration of CO₂ was < 1 ppm or 350 ppm. Different amounts of sodium chloride (0–70 μg/cm²) were added before exposure. The corrosion products were analyzed by gravimetry, ion chromatography, X‐ray diffraction and scanning electron microscopy. Mass gain and metal loss results are reported. The combination of high humidity and NaCl is very corrosive towards AZ91. However, the NaCl‐induced corrosion is inhibited by ambient concentrations of CO₂. Exposure in the absence of CO₂ gives rise to heavy pitting, with brucite, Mg(OH)₂, being the dominant corrosion product. In the presence of CO₂ a layer of hydrated magnesium hydroxy carbonate, Mg₅(CO₃)₄(OH)₂ · 5 H₂O forms. A tentative corrosion mechanism is presented that explains the behavior in the two environments.     

Indexed in current contents

Indexed in current contents     

Fast approximate analysis for token passing LAN protocol with asymmetrically distributed traffic loads

A new approximate analytical expression for the mean packet delay for a non-exhaustive token passing LAN is derived and compared with discrete event computer simulation. The computational problems associated with the exact and other approximate treatments are avoided because the need to solve a system of simultaneous equations is removed.<>