A comparison of commonly used hydrologic design methods for rainwater collectors

Rainwater collection as a possible water source in developing countries is introduced. The major parameters in calculating the size of the tank are defined. Six methods that have been used previously to relate demand, storage, reliability and the rainfall pattern are compared to the Ottawa Model over a wide range of demands.     

Characterization of GaAs layers grown on polycrystalline GaAs by LPE and current controlled LPE

It is the purpose of this paper to investigate the suitability and effectiveness of growth of thin GaAs layers on polycrystalline GaAs substrates by liquid phase epitaxy (LPE) and current controlled LPE (CCLPE). During each growth run LPE and CCLPE were used to grow thin GaAs layers on two large-grain polycrystalline GaAs substrates cut from the same wafer and simultaneously placed in the same growth system. The grain boundary was exposed by cleaving the samples perpendicular to the grain boundary. Notnarski contrast, SEM, C-V and Hall measurements were performed in order to determine the surface morphology, discontinuity of epilayer at the grain boundary, epilayer thickness unform-ity, resistivity (in directions parallel and perpendicular to the grain boundary), and dopant concentration. The CCLPE system was carefully designed so that growth would take place only by electrotransport in the absence of convection or Peltier cooling. The results indicate that CCLPE yields layers with improved surface morphology and thickness uniformity as compared to those grown by LPE. In some samples the epilayer was discontinuous at certain grain boundaries. Results are presented on CCLPE growth rate dependence upon grain orientation, current density, and continuity of the epilayer at the grain boundary.     

Latest Developments in the Batchwise Application of Hot-dyeing Reactive Dyes to Cellulosic Knitwear

A dyeing profile for a range of reactive dyes suitable for application to cellulosic knitwear is defined. Such a profile shows good level-dyeing, reproducibility and fastness properties together with potential for simplified dyeing processes.     

Frequency response algorithms for H∞optimization with time domain constraints

A very broad framework for control system design is considered that encompasses frequency-response methodologies for H_∞ optimization that solve various aspects of the control design problem and that are less well known that state-space methods. The focus is on linear programming, Lawson's algorithm, and Trefethen's algorithm. A modified Lawson's algorithm is proposed and related to Trefethan's method. The modified algorithm is shown to be significantly faster than linear programming and Lawson's algorithm. It is also shown how to extend the modified Lawson's algorithm so as to handle time-domain constraints in addition to frequency-domain specifications, which distinguishes it from other H_∞ optimization methods. Some steps are taken toward dealing with time domain constraints within an H_∞ optimization framework     

Acoustic emission technique for leak detection in an end shield of a pressurised heavy water reactor

This paper discusses the successful application of the Acoustic Emission Technique (AET) for detection and location of leak paths present on the inaccessible side of an end shield of a Pressurised Heavy Water Reactor (PHWR). The methodology was based on the fact that air and water leak AE signals have different characteristic features. Baseline data was generated from a sound end-shield of a PHWR for characterizing the background noise. A mock up end-shield system with saw cut leak paths was used to verify the validity of the methodology. It was found that air leak signals under pressurisation (as low as 3 psi) could be detected by frequency domain analysis. Signals due to air leaks from various locations of a defective end-shield were acquired and analysed. It was possible to detect and locate leak paths. Presence of detected leak paths were further confirmed by alternate test.     

On liquid motion in a circular cylinder with horizontal axis

Summary The flow pattern of the slosh motion of a homogeneous, nonviscous (inviscid) and incompressible fluid with a free surface, contained in a rigid circular canal, has been dealt with analytically and experimentally. The axis of the canal is perpendicular to the direction of gravity. Considered are transverse (lateral to axis) oscillations of the liquid. The shape of the free liquid surface is determined numerically by means of a simple procedure. Theoretically calculated streamlines (path lines) are found to be in good qualitative agreement with experimentally observed trajectories of small spheres, made of plastic material and immersed in the liquid. The plastic particles and the liquid (water with a solution of salt added) have the same density.     

Kinetics of intermetallic compound growth between nickel,electroless, Ni-P,electroless Ni-B and tin at 453 to 493 K

The growth kinetics, crystal structure, and morphology of the intermetallic compounds formed between nickel, electroless Ni-P and electroless Ni-B coatings with tin at 453 to 493 K for times up to 506 h have been determined by microscopical and X-ray diffraction techniques. The compound Ni₃Sn₄ was formed. All kinetics followed as parabolic law with activation energies of 128.0, 130.4, and 122.3 kJ mol^–1 for the Ni/Sn, Ni-P/Sn and Ni-B/Sn systems, respectively. The rate of growth of Ni₃Sn₄ in the Ni/Sn and Ni-P/Sn systems were similar but the rate of growth in the Ni-B/Sn system was five times faster. Pores occurred in the intermetallic compound formed in the Ni-P/Sn system and these are discussed in relation to the density of the phases.     

Fuzzy financial decision-making: load management programs case study

This paper derives two fuzzy financial profitability models, namely, a least cost solution model and a cost-benefit analysis model, to evaluate the fuzzy financial profitability of load management alternatives. A straightforward vertex parameters' fuzzy mathematics operation using the function principle is derived as an alternative to the traditional extension principle and is applied to evaluate a number of different financial decision indexes. Compared to the extension principle, the function principle is simple to implement and is conceptually straightforward. The geometric moments of the fuzzy financial indexes are established in order to determine their relative ranking as part of a decision-making process. The performances of the proposed fuzzy financial models are verified by considering their application to two practical load management programs in Taiwan, namely, a cooling energy storage air conditioner and a cogeneration project. These investigations not only confirm that the results of the fuzzy financial models are consistent with those of the conventional crisp models but also demonstrate that the proposed models are more flexible, intelligent, and computationally efficient compared to the extension principle fuzzy mathematics approach. The developed models represent readily implemented possibility analysis tools for use in the arena of uncertain financial decision-making.