Higher bit rates for dispersion-managed soliton communication systems via constrained coding

Constrained coding as a method to increase the data rate in dispersion-managed soliton (DMS) communication systems is proposed. This approach is well known and widely used in the context of magnetic and optical recording systems. This paper shows that it is also applicable to DMS systems due to certain similarities between the underlying physical channels. Since timing jitter is an important error-generating mechanism for solitons, a coding scheme specifically designed to combat pulse shifts is also presented, and its properties in the framework of a particular information-theoretic channel model are analyzed. A connection between the model used and the real physical channel is then established. Next, the coded system is compared with the original one from the channel capacity point of view with the help of numerical examples. Finally, the fact that the application of constrained coding may alleviate soliton pulse-to-pulse interaction is exploited. This, in turn, opens the door to the usage of higher-than-usual map strengths and ultimately leads to a significant increase of up to 50% in the bit rate.     

Interface formation between two organic films based on phthalocyanine and perylene derivatives

The process of interface formation between two organic films composed of donor (copper phthalocyanine, CuPc) and acceptor (perylene-3,4,9,10-tetracarboxylic dianhydride, PTCDA) molecules has been studied in situ using the total current spectroscopy technique. It is established that the donor-acceptor interaction between CuPc and PTCDA molecules do not distort the energy structure of the density of electron states. The main π*, σ*₁, and σ*₂ bands of antibonding (unoccupied) electron states are identified, which are determined both by C-C bonds in the aromatic rings and by additional C-N and C-O bonds. The width of the interface potential barrier is evaluated and its relation to the limiting polarizability of molecules is demonstrated. The interface potential barrier is formed in the course of negative charge transfer between donor (CuPc) and acceptor (PTCDA) molecules.     

Ecophysiology of ochratoxigenic Aspergillus ochraceus and Penicillium verrucosum isolates. Predictive models for fungal spoilage prevention - a review

Ochratoxin A (OTA) is a secondary metabolite produced by several species of Aspergillus and Penicillium; among them Aspergillus ochraceus and Penicillium verrucosum are two ochratoxigenic species capable of growing in different climates and thus contamination of food crops with OTA can occur worldwide. OTA can be found in a wide range of foods such as cereals, coffee, cocoa, spices, beer, wine, dried vine fruit, grapes and meat products. OTA is toxic to animals, it presents neurotoxic, immunotoxic and nephrotoxic effects. It has been implicated in a human kidney disorder known as Balkan Endemic Nephropathy. This review focuses on the ecophysiology of ochratoxin-producing Aspergillus ochraceus and Penicillium verrucosum, the effect of environmental factors on their germination, mycelial growth, and OTA production. Knowledge of environmental conditions required for sucessive stages of fungal development represent the first step towards preventing mycotoxin formation. Predictive models for different stages of fungal development are presented, which allow prediction of the time before spoilage as a function of the abiotic factors. Finally, the implications of these studies in management of barley, coffee and grapes are described. This can help to identify the critical control points in their production, storage and distribution processes.     

Specular reflection of thermal neutrons from Gd-containing layers and optimization of antireflective underlayers for polarizing coatings

A detailed analysis of specular neutron reflection from an absorbing medium is given. The experimental studies revealed that oxidation and roughness of the surface are the main factors that determine the neutron reflectivity of Gd-containing layers. It is concluded that the empirical approach used at present does not guarantee optimization of underlayer parameters (composition and thickness) and technological regimes. An algorithm of optimization is proposed, in which account is taken of the substrate potential, the dependence of the underlayer potential on the thermal neutron wavelength, the polarizing coating imperfections that enhance reflection of neutrons with the undesired spin. The antireflective TiZrGd underlayer for CoFe/TiZr supermirrors produced at the magnetron facility DIOGEN (PNPI, Gatchina) is optimized.     

Setting-up a cost recovery system for the largest wastewater treatment plant in South-East Asia.

A tariff system has been set up for the largest wastewater treatment plant in South-East Asia, the Samut Prakarn Wastewater Treatment Plant south of Bangkok, which is currently under completion. Fully functional the plant will have a design capacity for 500,000 m3 per day and will service a combined residential and industrial area with approximately 600,000 residents and 2,300 factories. The tariff system, which includes a tariff model, is based on water consumption and BOD load. As background for setting the tariffs a comprehensive monitoring system including an industrial permitting system has been developed. The paper presents the background and rationale for setting up the system as well as the objective, scope and content of the tariff system and the industrial permit system. Further, the feasibility of introducing cost recovery systems, which is widely accepted in developing economies on the conceptual level and to some extent implemented at the legal and regulatory level, but has yet to be implemented at large, is discussed.     

Characteristics of particle-associated PAHs in a first flush of a highway runoff.

Runoff monitoring of six rainfall events was carried out in a highway, Winterthur, Switzerland focusing on first flush (runoff volume up to 2.88 mm). Six runoff events were used to investigate the characteristics of particle-associated PAHs in first flush. The fine fraction (< 45 microm) had a relatively higher contribution than the coarse fraction. A significant contribution of the coarse fraction was observed at some periods when the runoff flow rapidly increased. Fluctuation of PAH content during a runoff event was significant in the coarse fraction and, in contrast, the PAH content in the fine fraction was less fluctuating. The weighted average PAH content in each event ranged from 17 to 62 microg/g in total SS, from 23 to 54 microg/g in the fine fraction and from 16 to 84 microg/g in the coarse fraction. The loading of particle-associated PAHs from the first flush of highway runoff ranged from 0.06 to 0.22 g/ha in a total of 12 PAH species.     

Hydrogen-driven denitrification of wastewater in an anaerobic submerged membrane bioreactor: potential for water reuse.

An anaerobic submerged membrane bioreactor was coupled with a novel hydrogen delivery system for hydrogenotrophic denitrification of municipal final effluent containing nitrate. The biological treatment unit and hydrogen delivery unit were proven successful in removing nitrate and delivering hydrogen, respectively. Complete hydrogen transfer resulted in reducing nitrate below detectable levels at a loading of 0.14 kg Nm(-3) d(-1). The produced water met all drinking water guidelines except for color and organic carbon. However, the organic carbon was removed by 72% mostly by membrane rejection. To reduce the organic carbon and color of the effluent, post treatment of the produced water is required.     

Microwave Reflectivity From Gold Sputtered Nanolayer

This paper deals with reflectivity of a gold layer of nanometer-scale thickness sputtered on a dielectric foil at microwave frequencies. A model of nanometer-scale spheres characterizes the behavior of the layer. For short sputtering times, these spheres are separated, and later they touch each other to form a continuous layer. The structure is analyzed in several ways. The first model, as suggested in the literature, replaces the spheres by their electric dipole moments, while the second, newly proposed model replaces them by their mutual capacities. The structure is also being investigated by the CST Microwave Studio software. The data provided by the models is compared with the data obtained from measurements carried out and published by the authors previously. The reduction in effective conductivity of the layer due to microscopic phenomena in thin films is taken into account in the models. The measured conductivity is compared with values taken from the literature, and the differences are discussed.     

A general discrete contour model in two, three, and four dimensions for topology-adaptive multichannel segmentation

We present a discrete contour model for the segmentation of image data with any dimension of image domain and value range. The model consists of a representation using simplex meshes and a mechanical formulation of influences that drive an iterative segmentation. The object's representation as well as the influences are valid for any dimension of the image domain. The image influences introduced here, can combine information from independent channels of higher-dimensional value ranges. Additionally, the topology of the model automatically adapts to objects contained in images. Noncontextual tests have validated the ability of the model to reproducibly delineate synthetic objects. In particular, images with a signal to noise ratio of SNR /spl les/ 0.5 are delineated within two pixels of their ground truth contour. Contextual validations have shown the applicability of the model for medical image analysis in image domains of two, three, and four dimensions in single as well as multichannel value ranges.